DIY Dredge for gold - with 3 inch injector. TEST for dredge, injector , and fine flush
HTML-код
- Опубликовано: 7 ноя 2021
- Input 2 inches, output 3 inches.
HONDA pump
Anyone who wants to extract more gold , uses such tools.
#rivergold #goldfinders #goldpanning
Благодаря много за интересните клипове! За мен като пълен новобранец в хобито са доста поучителни. Желая ти много късмет и здраве!
Мерси
First off great setup. Try not to jam your nozzle into the bottom when you are sucking. It slows material pickup and stops your material from flowing into the hose. you'll move a lot more material. Throw in some 3/4 inch riffles. you need a pressure drop to get the gold to fall out. great job. I love your sluice.
Hi, in this video, we were just testing this injector and the dredge.
The colleague made a lot of adjustments after the test.
The water in the dredge was quite strong and flowed unevenly due to the injector.
The man , learns all one's life :))
Que bien el trabajo me gusta
👍
👍
👍
Mantap bro ide kretipnya..mohon izin untuk mencoba
kita harus rasional, bertindak
What size is the pump bottlenecked down to?
Hello, 2" in , 3" out
@@Kamenistia_Prospecting sounds good. Also at the nozzle small point, what size should the smallest point go down to? Thank you
Very nice work brother! Is that a 2" pump??
Yes , 2"
и входа и изхода са Ф51мм няма 3 цола.За тази помпа колко мм е стеснението на най-тънката тръба на инжектора ?
Вече няма как да я премеря
@@Kamenistia_Prospecting а ,Камене ,имаш ли идея колко широк трябва да е улеят за 3 цолов инжектор с такава помпа?
@@stefanvalchev8066 Здрасти 40-45 сантима
@@Kamenistia_Prospecting Камене ,вече виждам няколко колеги с драги 3" и такава помпа 55-60см ширина.Изненадващо е тази да е 40-45 и водатат не изглежда да е прекалено много
Please where would I get the set to buy?
Good question...
This is an injector that is made without analogue.
Interestingly, a handle is used to keep a person from bending over, the rest is commonplace and can be easily made or bought.
Maybe you should look at the market that is near you, because I am in Bulgaria.
Makineyi nasıl alabiliriz?
all of this is handmade
Bagaimana cara mesan alat jek
This is DIY ... 🙂
От колко време се занимаваш и като грамаж колко злато си изкарал за това време?
Дали може да конкретизираш въпроса си ?
Very interesting l want this nozzle
къде е границата в закона за любителски и промишлен добив? Някакви киловати на машините ли?
Когато вече не се използва ръчен способ, тогава става промишлен добив.
Общоприетата граница, се смята три цолова драга
ruclips.net/video/YY5BDheUURk/видео.html
Да. Само една дръжка трябва да му сложи. За да не се навежда