@@ahmedjubory3204 it's different for every place of study. But if you download matlab from your university website or whatever, simulink comes with it.
I remember having a simulink project to build a 32 bit MIPS system using xilinx and vivado. That was one of the hardest courses of my life, and I needed to pass that course in order to graduate from engineering. I scratched and clawed my way through and though I never thought I'd pass, I still did. And 2 years later, I still have PTSD of Simulink, despite all its use cases...
Thank you for the tutorial, I'm a beginner in this software and this is very good material. Thank you Matlab, Priyanka, and Michael for the good learning material.
If you watch the video with Professional eyes and not with Woman eyes then you will know that he is not interrupting but clearing all the points by asking questions that people can ask and be confused about
No the woman kept "interrupting" or rather wanted to do the presentation by herself. I think both of them needed to allocate topics to one another before doing the actual presentation because it sounds like they are fighting for a chance to speak.
Gracias por explicarlo tan detalladamente, sin duda nos ayudará mucho para simular nuestros diagramas de control. Además me parece genial que podamos ver las gráficas de nuestro diagrama
Gracias a las personas del video por explicarnos de una manera sencilla este tutorial para empezar a utilizar la aplicación, ya que tiene varios tipos de usos al momento de simular los diagramas de control que en algún momento implementaremos en el campo laboral.
Nice demonstration can we enter a charecter of Mosfet and is fed D.C voltage of certain value and simulate according to changing character of that active device ?
My scope does not show the gain and the sinewave lines in the same graph, it shows two windows one for each signal. How do I get to plot both signals in the same graph? I'm only able to chose the number of axes, not the number of input ports.
Help needed I have simulink model in which PID and Fuzzy controller are used. The simulation time took long time to complete. How I can run model faster??? Thanks
Dear, I created a simple simulink model for Diesel generator unit. I need to make it stand alone application working out side matlab beside its interface like GUI. Because I made the same model by the use of Guide (GUI) and i compiled it. Then going out side matlab and double clicking on the compiled file, It shows a nice interface that been created. My problem is, how do this by the use of simulink, i.e working outside matlab (under windows environemt like any visual model) without loosing the simulink interface.?? please help
How can I specify a start point? My sim. has feed-back, and the error I'm getting suggests that the sim. is starting at the output (rather than the input), because the feed-back code is trying to access the output variable and failing on an index error, i.e. the output variable is not populated yet.
Hello mam , Can u please let me know how is the time selected ,is it the seconds on x axis the time is expressed. If I want to run the simulation for 2 minutes of model operation , how can I do that ?
Who else is watching this because you got a simulink assignment during quarantine??? hahahahahahaha kill me
hi..I got assignmnet but i could not download the simulink even if i follow the step
@@ahmedjubory3204 it's different for every place of study. But if you download matlab from your university website or whatever, simulink comes with it.
@@JacobKinsley I will try , thank you for remind me with this , really appreciate it
BROOOOO IM IN THE SAME SITUATION😂, AND IM FROM DR🇩🇴🇩🇴, thanks youtube
i just wanna know is it in university or high school >_>
I remember having a simulink project to build a 32 bit MIPS system using xilinx and vivado. That was one of the hardest courses of my life, and I needed to pass that course in order to graduate from engineering. I scratched and clawed my way through and though I never thought I'd pass, I still did. And 2 years later, I still have PTSD of Simulink, despite all its use cases...
This video is too simple and not enough knowledge for real world
Love the way presenters interected with each other.
That made video really engaging.
They engaged downstairs too😁
@@wiseman2732 we dont talk about that here
A shame my professor doesn't interact with anyone when it comes to teaching us how to use Simulink
Poo cuck
Thank you for the tutorial, I'm a beginner in this software and this is very good material. Thank you Matlab, Priyanka, and Michael for the good learning material.
Just what I needed at exactly the right time!
Am I the only one who thinks the woman was doing the presentation better by herself? The man kept interrupting, good presentation but too many stops.
I know I agree. Typical mansplaining behavior
If you watch the video with Professional eyes and not with Woman eyes then you will know that he is not interrupting but clearing all the points by asking questions that people can ask and be confused about
No the woman kept "interrupting" or rather wanted to do the presentation by herself. I think both of them needed to allocate topics to one another before doing the actual presentation because it sounds like they are fighting for a chance to speak.
@@hithaantony1071 I know you don't like that
Gracias por explicarlo tan detalladamente, sin duda nos ayudará mucho para simular nuestros diagramas de control. Además me parece genial que podamos ver las gráficas de nuestro diagrama
an awesome video guys, thank you
Thank you for uploading these videos.
Gracias a las personas del video por explicarnos de una manera sencilla este tutorial para empezar a utilizar la aplicación, ya que tiene varios tipos de usos al momento de simular los diagramas de control que en algún momento implementaremos en el campo laboral.
Wow 💖 What I'm searching for I have get that exactly. Thank you ☺️
It is too much interested course so how can i get full tutor
Thank you very much ma'am, for wonderful video.
Thank you very much! It’s really easy to understand:)
Thanks guys
Simple and concise.
Thank you!
Nice demonstration can we enter a charecter of Mosfet and is fed D.C voltage of certain value and simulate according to changing character of that active device ?
Is there an app similar to simulink but free?
Really good series for a beginner.
Hi, can we establish Zigbee network on Simulink ?
Was Very interesting the way you explained
My scope does not show the gain and the sinewave lines in the same graph, it shows two windows one for each signal. How do I get to plot both signals in the same graph? I'm only able to chose the number of axes, not the number of input ports.
Same like me
Good way of explanation
The scope function is not showing any output graph result
Can you please help me with this?
Merci! Super tutoriel.
Help needed
I have simulink model in which PID and Fuzzy controller are used.
The simulation time took long time to complete.
How I can run model faster???
Thanks
Am in love with your video
THANK YOU
Great work👌👌
I am not getting menu bar in blank model page
Nice video and very well explanation.
Dear, I created a simple simulink model for Diesel generator unit. I need to make it stand alone application working out side matlab beside its interface like GUI. Because I made the same model by the use of Guide (GUI) and i compiled it. Then going out side matlab and double clicking on the compiled file, It shows a nice interface that been created. My problem is, how do this by the use of simulink, i.e working outside matlab (under windows environemt like any visual model) without loosing the simulink interface.?? please help
Thank you!
How can I specify a start point? My sim. has feed-back, and the error I'm getting suggests that the sim. is starting at the output (rather than the input), because the feed-back code is trying to access the output variable and failing on an index error, i.e. the output variable is not populated yet.
wow,,,you guys are awesome,,,and I suggest you guys should have a date,,,please do that,,,love you
Great videos for beginners ,can u give any link or channel so that I can get more simulink tutorials.
Thank you ❤
Hello mam ,
Can u please let me know how is the time selected ,is it the seconds on x axis the time is expressed. If I want to run the simulation for 2 minutes of model operation , how can I do that ?
Its coming invalid sample time in sine wave ehat to do
From wheer can I get the slides used in the video tutorials ??
good video
i dont have the run button in simulink?? what to do
Can simulink be used to implement Possibilistic c-means based algorithm for clustering Image and video data set?
this was cool thank you, i am learning
Thanks a lot i am a beginner still understood clearly.
where I can get the soft ware plzz share the link sir
Is there a TV and Printer components?
Thank u:)
How I can create SG3524 ic function in malab ?
I can't find my simulink in Matlab
Do you have any four wave mixing tutorials where i can model in simulink?
nice work
Thanks both of you for useful knowledge sharing . Can you please send or assist as with job details at fresher level for Matlab and simulink.? Thanks
Hello please help me to design control system
Good morning. May I please download this video?
excellent
please help for the how to load the data into inport simulink data?
Can some tell me how to delete a block in it
As far as I understand, they (Simulink and Simscape) have no advantages or disadvantages over each other, isn't it?
How to use from multimedia in DSP tool box
How to import simulink model for word?
I want modeling for DC motor if u can show me the link
Tanks
Excellent
I'm unable to connect the Scope and the Sine wave. It shows a red-dotted line. Please help
May be u haven't set the port of scope as 2
If I model a cantilever in spring mass dashpot then how can we get displacement at fixed middle and tip in simulink
Yes !
2022 here. Doesn't work
Thank you.
tq
Please configuration propreties of spectrum scope. Version R2019a
Great
the input is the yellow one tf
NICE
Like it
You sound like the girl Brian Griffin falls in love with on Family Guy
Getting Start with simulink
😅😅
Hahaha 😂
Which one?? He does it like 30 times
Nice
Where is exaple?😑
So Simulink is within MATLAB?
It is
Yes
great
My Simulink library browser is empty then what to do
there is nothing
Almost every DSP tutorial I have found on the RUclips is taught by a India guy/girl
So many engineers. Yet their electrical infrastructure sucks ass. Why.
And becomes distracting
@@HermanWillems Caste Based reservation
That PEMFC template seemed so simple at first but now it's ruining my life. I'm not a math genius.
how to generate a cosine wave in simulink?
Just give your sine wave a 90 degrees phase angle
Why is the period 6 ?! Why not 3 4 or 5 .
can i simulink labrary to plot 3d animation
Pid ?
Subtitles, please...
👍👍👍
The worst thing to happen to me in 2020 was MATLAB. If it wasn't for college, I wouldn't even LOOK at your software.
Lol but you would have looked at MATLAB regardless in your job probably because it’s a very powerful program
AIDER MOI pour fair une sumilation d'un altrnateur svp
ok
thanks priyanka
helo yor komputer hes vayrüs
2
说相声呢😂
Привет индианке, ваш говор выдает постоянная вставка мягкого знака между двумя согласными или между согласной и гласной буквами в последних слогах.
.
Having 2 people in One video is not the best way to learn. I liked the contain but not the presentation.
I am electronic students where I make a best career in electronic engineering....
But apparently you can't use proper grammar.
Зачем на 1 курсе нам это говно?
great company mathworks pvd ltd Bangalore 560103
ngl, this is the worst tutorial i ever seen.