⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
thanks for sharing your video, my Buick Enclave bps is working but its out of calibration like yours, but you mentioned calibrating? how do we calibrate the positioning sensor?
Many Other people I see have this problem with the BCM forgetting the Sensor - does this scanner RELREAN the Body control Module to see the sensor so the brakes will go on and off as they are supposed to do? if not or even if it does, do you know what scanner does this? what's the best scanner for the cheapest price that can relearn the sensor?
you keep calling that a SWITCH, it's a 3 Prong sensor man, not a switch. see at 5:07 / 8:47 I have it freeze framed, is this screen showing us a RELEARN program so the BCM will learn the position of that sensor and start working properly?
Nope it doesn't take care of our problem because you didn't show the brake lights going on at the rear of the car and off again when you let off the brake. I put a new sensor in and it did the EXACT same thing the one O took out was doing. step on the brake and the lights go off for a second then back on, let off the brake and the lights go off for 5 seconds and then come back on and stay on while driving. the only go off all the way when I shut the car off. this car is a Pontiac Torrent ( Same a an Equinox ) with that same exact brake pedal position SENSOR
I have a 2011 Cruze Liz and I have the p057c code coming up. Ive replace the sensor 3 times. The CE light goes away for about a month after replacing the sensor then comes back. Even with the CE light on cause of this code my brake lights still work. They work so good that when the car is parked not running and no key in the ignition the lights come on by themselves. Driving down the road they come on by themselves, this sucks cause when you have the cruise control on and the lights come on it continuously kicks the cruise off. To get the lights to go off I have to pull the brake peddle back with my foot just to get them to go off. Any insight on how to fix this problem would be much appreciated.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Will you please make a video how to calibrate brake paddle position sensor
thanks for sharing your video, my Buick Enclave bps is working but its out of calibration like yours, but you mentioned calibrating? how do we calibrate the positioning sensor?
Many Other people I see have this problem with the BCM forgetting the Sensor - does this scanner RELREAN the Body control Module to see the sensor so the brakes will go on and off as they are supposed to do? if not or even if it does, do you know what scanner does this? what's the best scanner for the cheapest price that can relearn the sensor?
Do I need to calibrate a 2013 traverse brake position sensor?
I want to how to calibrate the brake switch.
Same here
Im having this code but i do to show it pressing and releasing and position percentages what could the issue be
Did you have to recalibrate it?
I'm working on a 2013 Tahoe, in my scan tool under EBCM (electronic brake control module) it has the brake position calibration.
I change my break pedal control switch and still nothing do I need to calibrate it or delete it from the computer inorder for it to work ?
you keep calling that a SWITCH, it's a 3 Prong sensor man, not a switch. see at 5:07 / 8:47 I have it freeze framed, is this screen showing us a RELEARN program so the BCM will learn the position of that sensor and start working properly?
Nope it doesn't take care of our problem because you didn't show the brake lights going on at the rear of the car and off again when you let off the brake. I put a new sensor in and it did the EXACT same thing the one O took out was doing. step on the brake and the lights go off for a second then back on, let off the brake and the lights go off for 5 seconds and then come back on and stay on while driving. the only go off all the way when I shut the car off. this car is a Pontiac Torrent ( Same a an Equinox ) with that same exact brake pedal position SENSOR
I have a 2011 Cruze Liz and I have the p057c code coming up. Ive replace the sensor 3 times. The CE light goes away for about a month after replacing the sensor then comes back. Even with the CE light on cause of this code my brake lights still work. They work so good that when the car is parked not running and no key in the ignition the lights come on by themselves. Driving down the road they come on by themselves, this sucks cause when you have the cruise control on and the lights come on it continuously kicks the cruise off. To get the lights to go off I have to pull the brake peddle back with my foot just to get them to go off. Any insight on how to fix this problem would be much appreciated.
And the criisewant work
How much price of this Scanner?
100 bucks imma get 1
@@Lott0Jay 🤣
I got a 09 hhr
BPP Sensor Calibration will fix this fault
Good
Traducir a idioma Español
Ya burre este bato
Sounds like you are under water
Hallo I’m under the water 💧