@mario3804 Intake and exhaust modifications require an EFI controller to adjust the air-fuel mixture. If you are just going to change the intake and exhaust on your bike, the Vance & Hines FuelPak is a good choice. It is simple to install and you do not need a computer. If you plan on doing any performance upgrades to your motor such as a big bore kit, head work, and cams, the Power Commander would be a better choice. You can download base map for your bike on their website.
@mario3804 [continued] The Power Commander does require dyno tuning to achieve maximum performance and fuel efficiency. There are also a couple of auto-tune systems like the ThunderMax and Daytona Twin Tec controllers. The main advantage of these is that you will not need a dyno to obtain the best results.
Ordering my third rubber hose on Monday, that is the roughest part of install. My backplate sticks out kinda far and the hose is a pain in the ass to connect to the backplate
I did the same thing. I would go with 10 ft lbs. 16 would be fine if the bolt didn’t have a thru hole and a cross hole in it. Also I would use an inch lb wrench set @ 120 in lbs . Big torque wrench is not only awkward, but not as accurate at low settings.
I don’t see that adapter plate with the S&S air cleaner I have on my 2018 Lowrider. Further has anyone installed external breather on S&S cleaner? www.sscycle.com/products/stealth-air-cleaner-kit-with-chrome-airstream-cover-for-2017-up-hd-m8-models/
See more at Countersteer
www.jpcycles.com/countersteer?Install_SandS_Cycle_Teardrop_Air_Cleaner_•_Available_from_JandP_Cycles&LcBzfR11Wo
Thank you. Your video helped this noob to working on bikes.
@mario3804 Intake and exhaust modifications require an EFI controller to adjust the air-fuel mixture. If you are just going to change the intake and exhaust on your bike, the Vance & Hines FuelPak is a good choice. It is simple to install and you do not need a computer. If you plan on doing any performance upgrades to your motor such as a big bore kit, head work, and cams, the Power Commander would be a better choice. You can download base map for your bike on their website.
@mario3804 [continued] The Power Commander does require dyno tuning to achieve maximum performance and fuel efficiency. There are also a couple of auto-tune systems like the ThunderMax and Daytona Twin Tec controllers. The main advantage of these is that you will not need a dyno to obtain the best results.
where can i find the adapter? I've been looking and cannot find, have ordered 2 others that do not work as they say the will. are these discontinued?
Take a shot every time he says basically
nice video, thanks
Just ordered one from you guy’s
Ordering my third rubber hose on Monday, that is the roughest part of install. My backplate sticks out kinda far and the hose is a pain in the ass to connect to the backplate
I ditched it and put the metal crossover tube on mine then put fuel line venting the breathers to the ground
My Harley is carbureted. Should I rejet the carb before installing the new air cleaner?
+eric heggernes I would recommend rejetting, especially if you are doing air cleaner and exhaust
Thanks! that's what I was thinking but I wanted to be sure.
If it's backfiring, and popping like a gun shooting, and won't start, what should I rejet my 02' Sportster Xlh 883 to? .. Thanks!!
What kind of torque wrench is that?
Bought this kit, was torquing breather bolts to the instructions 16ft lbs spec. Snapped it at 15ft lbs. what did I do wrong.
I did the same thing. I would go with 10 ft lbs. 16 would be fine if the bolt didn’t have a thru hole and a cross hole in it. Also I would use an inch lb wrench set @ 120 in lbs . Big torque wrench is not only awkward, but not as accurate at low settings.
what do you gain from this air filter verses stock Harley air clener
John Holmes More air flow, which combined with a bit more fuel = more power:) Also the ability to clean and re-use the filter.
Does this have sufficient air flow for stage 2?
Yes, no problem
@@jpcycles Thank you.
I don’t see that adapter plate with the S&S air cleaner I have on my 2018 Lowrider. Further has anyone installed external breather on S&S cleaner?
www.sscycle.com/products/stealth-air-cleaner-kit-with-chrome-airstream-cover-for-2017-up-hd-m8-models/
GOOD GOOD ,,,,