HOW TO: 4-nozzle installation on DJI Agras T50
HTML-код
- Опубликовано: 11 июл 2024
- The DJI Agriculture Agras T50 allows operators to install a 4-nozzle system. This enables the Agras T50 to achieve a higher flow rate of up to 6.34 gallons per minute, compared to 4.23 gallons per minute when using the standard configuration.
This tutorial is designed to guide you through the process of installing the 4-nozzle kit on your DJI Agras T50. The exact same process applies to the DJI Agras T25.
𝗛𝗮𝘃𝗲 𝗤𝘂𝗲𝘀𝘁𝗶𝗼𝗻𝘀? Ask in the comments.
=================================
👉 Subscribe for more DJI Agras T50 content
👉 Ring the bell for alerts
www.bestwaydrones.com
www.bestwayswag.com
Facebook:
/ bestwayaghq
BestwayAgHQ
Instagram:
www.bestwayag.com/bestway_ag
@bestway_ag
Songs licensed through Adobe Stock.
#djiagras #djiagriculture #djit50 #agrast50 #bestwayag
@DJIAgriculture
TIMESTAMPS
00:00 - Introduction
04:07 - Step 1: Preparing to install the Agras T50 4 nozzle kit
05:31 - Step 2: Removing the ESC
07:38 - Step 3: Removing the ESC cable
10:46 - Step 4: Installing the NEW ESC cable
17:58 - Step 5: Installing the flex feed tube
19:39 - Step 6: Installing the new spray head
24:23 - Step 7: Installing the in-position sensor
28:21 - Step 8: Final connections 
Наука
Nice sir❤
good
Thanks
Good explanation 👏
Glad you liked it
thanks for the great vids, can you isolate and only have 1 nozzle spraying, so when spraying isolated bushes where a full swath isnt needed, cheers
The T50 now has a side spray option so you can indeed that. We’ll be producing content on that in the near future.
Hello, with this 4 nozzle configuration, do you still have the option with sparying just 2 nozzles, or does it spray with 4 nozzles all the time
With them installed you can run all four or just two.
Can this be done to the T40?
No, the T40 does not have capability of adding the extra spray heads.