I have 6 KLH speakers and a KLH center speaker that I have used almost 20 years through many Sony and ONKYO receivers. The company died and is now being brought back as a high priced speaker!
I am thinking about the same setup with R100sw. So please tell how is the sound experience u r getting. What if i use r41m at front and back too? Have you tested 4k ps5 120 gaming on tx nr6100?
My old Sony STR-DB1070 amp is giving more and more the error message "Protector", and this has something to do with a 'short' or something. There is not much connected to this amp, only an optical audio cable from my computer and attached to it are two Mivoc SB210 tower speakers. After a few times turning the amp on and off it stays on and then works fine. But since this amplier is brought out in 2002 or so, it is already 20 years old. What I seek is a powerful hifi amp/receiver that really can feed my Mivoc SB210 speakers. These speakers are pretty massive and can practically move walls. Would this Onkyo amp also suffice to feed enough power for these speakers? The label on the backside of the speaker say 4-8ohm (is a bit confusing, because I would say a loudspeaker has just one level of impedance/resistance), but the Mivoc SB210 has two 25cm (or 10") woofers, so they are either 8ohm woofers put parallel, making the speaker 4ohm, or 2 woofers of 4ohm put in serial and turn the whole speaker in 8ohm. It's a little confusing.
Hello Mr. Great setup. I've just bought ONKYO TX-NR6100. Now I have to collect $ for Klipsch speakers :) Do you maybe know if there is any option to have passthrough (when receiver is OFF/standby) and NOT to turn it ON when I power on TV or Chromecast ? I have this problem that turning on TV or other source triggers Onkyo 6100 and it powers up. During a day I would like to use only TV speakers and turn receiver on only when I need. Of course I can disable HDMI CEC but then other problems occur.
Me too I tried hooking up a marantz amp to it using the russound preout system and it came across check amp then it did a checking speaker test then it shut itself down so I disconnected the marantz amp and it was fine again...any thoughts?
I HAVE THE ONKYO TX-NR6100 WITH KLIPSCH SPEAKERSS R-620F CENTER-RP-400C AND SURROUND RM51M ATMOS R41SA IS 5,21 SETUP WITH 2 SUBWOOFERS IT SOUNDS AMAZING WITH THIS RECEIVER.I WOULD RECOMMEND
PERLESMITH Universal Floor Speaker Stands 26 Inch for Surround Sound, Klipsch, Sony, Edifier, Yamaha, Polk & Other Bookshelf Speakers Weight up to 22lbs - 1 Pair www.amazon.com/dp/B081N5Z89Y/ref=cm_sw_r_apan_i_9FR7N7TJDKYYJ5DX35KQ?_encoding=UTF8&psc=1
This is a programming nightmare! Constantly going into "Amp Diagnostics" (check speaker connections" when they are perfect! Sorry I bought $500 worth of a headache!
I just bought one and i already hate it. Its stuck in headphones mode even when there not connected. Garbage. Hope the replacement is not Garbage. What a waste of time and money.
I have 6 KLH speakers and a KLH center speaker that I have used almost 20 years through many Sony and ONKYO receivers. The company died and is now being brought back as a high priced speaker!
Why there’s no Dolby atmos on the tx6100 screen
Klipsch 🥰
Why are your putting rear ported speakers inches away from the wall?
I am thinking about the same setup with R100sw.
So please tell how is the sound experience u r getting.
What if i use r41m at front and back too?
Have you tested 4k ps5 120 gaming on tx nr6100?
My old Sony STR-DB1070 amp is giving more and more the error message "Protector", and this has something to do with a 'short' or something. There is not much connected to this amp, only an optical audio cable from my computer and attached to it are two Mivoc SB210 tower speakers. After a few times turning the amp on and off it stays on and then works fine. But since this amplier is brought out in 2002 or so, it is already 20 years old. What I seek is a powerful hifi amp/receiver that really can feed my Mivoc SB210 speakers. These speakers are pretty massive and can practically move walls. Would this Onkyo amp also suffice to feed enough power for these speakers? The label on the backside of the speaker say 4-8ohm (is a bit confusing, because I would say a loudspeaker has just one level of impedance/resistance), but the Mivoc SB210 has two 25cm (or 10") woofers, so they are either 8ohm woofers put parallel, making the speaker 4ohm, or 2 woofers of 4ohm put in serial and turn the whole speaker in 8ohm. It's a little confusing.
This speaker set up at Amazon $1200
Klipsch Reference R-26FA 5.1 Home Theater Pack, Brushed Black Polymer Veneer.
Just ordered the receiver $600
Hello Mr. Great setup. I've just bought ONKYO TX-NR6100. Now I have to collect $ for Klipsch speakers :)
Do you maybe know if there is any option to have passthrough (when receiver is OFF/standby) and NOT to turn it ON when I power on TV or Chromecast ?
I have this problem that turning on TV or other source triggers Onkyo 6100 and it powers up.
During a day I would like to use only TV speakers and turn receiver on only when I need.
Of course I can disable HDMI CEC but then other problems occur.
Hi.
Try to change the sound output on tv
What is hybrid standby?
Do you use an amplifier along with the receiver? I'm looking to buy this receiver. the front speakers I'm wanting to put a 600f klipsch
Me too I tried hooking up a marantz amp to it using the russound preout system and it came across check amp then it did a checking speaker test then it shut itself down so I disconnected the marantz amp and it was fine again...any thoughts?
Hello I have a question I'm getting no sound from my Klipsch r-120sw sub with my inoko 7100 receiver
Check all wiring if still you have no sound may the amp it is blow out .I guess nop
@@hecssceh5556 you mean the port on the AV receiver you think is toast?
Okay I wanted to say thank you it's fixed I had to run a ground from their receiver to a screw-on the sub and right away it works
@@hecssceh5556 okay it's fixed I had to run a ground from the receiver directly to the subframe
Nice
I HAVE THE ONKYO TX-NR6100 WITH KLIPSCH SPEAKERSS R-620F CENTER-RP-400C AND SURROUND RM51M ATMOS R41SA IS 5,21 SETUP WITH 2 SUBWOOFERS IT SOUNDS AMAZING WITH THIS RECEIVER.I WOULD RECOMMEND
how much did you spent i all this AV equipment?
Around 1,700 without TV
@@hecssceh5556 Great price!!!
Awsome-🤗🙌🏼just 🎊 Congratulations- Love that Önkyo So sweet , your set up is Amazing, especially that Top. Center speaker set up..😁👍...
Thank you
onkyo + klipsch = ok
Onkyo TX-NR6100 + Klipsch RP-600M (Bi-amp connection) + SVS 1000 Pro. 👍👍👍 Best regards 🧨
Hi. Do you have it and can confirm in practice this setup sounds great ? Are you from PL ?
What are your front speaker stands?
PERLESMITH Universal Floor Speaker Stands 26 Inch for Surround Sound, Klipsch, Sony, Edifier, Yamaha, Polk & Other Bookshelf Speakers Weight up to 22lbs - 1 Pair www.amazon.com/dp/B081N5Z89Y/ref=cm_sw_r_apan_i_9FR7N7TJDKYYJ5DX35KQ?_encoding=UTF8&psc=1
In which coubtry this is available ?
I get it in USA It is supposed to be available in other countries check website.
@@hecssceh5556 ok. Is this available for sale now in India? If so which city u r based in?
when i say usa i mean they are available the whole country.
I'm not sure if they are available in India
@@sudhakarmanickam2329 United States
Is it available. Cost . Ww are interested
Wat is the cost of set
Around $1,700 without TV
Price Pl. If suitable can be finalized immediately.
Around $1,700 without TV
SÓ QUE ESTA MARCA ACABA DE FALI QUEM TEM OK PARA COMPRAR AGORA SÓ ,muito bom ótimo aparelho..
A marca já está nas mãos de uma outra grande empresa.
It's has bluetooth too old version very delay.
What’s the cost
Around $1,700 without TV
This is a programming nightmare! Constantly going into "Amp Diagnostics" (check speaker connections" when they are perfect! Sorry I bought $500 worth of a headache!
I just bought one and i already hate it. Its stuck in headphones mode even when there not connected. Garbage. Hope the replacement is not Garbage. What a waste of time and money.