I put 35" toyo RT on 17's,. 3" leveling kit and -34 offset Racelines. Eibach truck springs, Bilstein 5100 Ready lift UCA's Hellwig rear sway. All good! 2018 Ram tradesman. Lake Havasu ☀️ AZ
My ram 2012 1500 4th gen 4x4 big horn crew cab. I’m running 35/12.5/20 toyo open MT’s tire and xtreme Mudder wheels combo with leveling kit 3.5in front and 2.5 in rear and installed RC 3” body lift kit with 4” RC adjustable monotube rear shocks and RC 2.5” lifted loaded front struts. And 3” wheel spacers. Absolutely love the look. Easy install on suspension and body lift if your not dumb and have tools. Can’t go wrong with the cost. No extra trim was needed or rub issues
2015 RAM 1500 with 3.5 suspension lift With 37x12.50 on 18x10 w/ -24 offset. Had to trim a lot, not just the plastic but the part of the metal corner piece of the fenders too.
Correct me if I'm wrong but I thought they separated in 2009, for all truck models? I even googled it and got the same answer, but I've seen more than one person say the same thing you're saying. Ps sorry, I'm obsessed with ram/cummins trucks lol
I'm a 4rth gen owner of a beautiful gray on black, 5.7 hemi monster ,hahaah like it's my 5th child and I treat it as so. She is so beautiful and powerful, I wouldn't own any other year of truck, I've owned a 2010/2014/2016 ..and none of them have been as awsome as this truck....
I feel like Chris Tucker talking to Jackie Chan in Rush Hour watching this video. "Do you understand the words that are coming outta my mouth?" I'll just email you guys when it's time for wheels and tires lol.
I have a 2017 dodge ram 1500 2WD ima install a 7”inch MaxTrac lift and ima go with 24 by 14 American forces with 35 inch tires I probably gonna have to trim just a bit
35x12.5 on mine with 5100 level. ridge grapplers. just have some minor rub at full lock fuel tritons. inner fender well... literally need to zip tie the fender back. bils are set at 2.0
I have a 2014 ram crew cab1500 with a 6 inch zone lift. I have -24 xd x10 in rims now can I use -44 12 inch wide rims with out any finder rubbing. I'm running toyo 35 open country extreem at.
Michael Neuhaus I ran 35’s on my 2014 ram with a 2.5” level without any rubbing on the factory sport wheels. I’ve also got a buddy that ran a 20x10 -19 with 35’s without rubbing.
Check out our gallery on our website! It will show you what others have made fit on their Toyota Tacoma! www.customwheeloffset.com/wheel-offset-gallery
@Anthony hamoui 4" BDS. It's funny since I wrote this 4 months ago I put the Rough Country pre loaded struts for 4" lift on. For some reason I was rubbing the plastic inner fender like crazy. I ended up having to trim about 3" of the plastic off to get my tire to stop rubbing. It didn't change my height so I don't know why.
i have a 2017 Ram 1500 with a 6" lift and 37x12.50R20x10. Toyo Open Country MT. Some trimming of the side/rear of the plastic airdam and a little behind the front tires on the metal. It seems that you get the rubbing when the suspension compresses on uneven ground and backing up when turning. Im now wanting to go with 22" wheels by 12" wide and either 37" tires again or 35".
so i have a 2018 limited with the air suspension and i put some adjustable links in the front so i’m wanting to run 20x10 -24 offset with 33x12.50 will that setup work with minimal plastic trimming thanks
Check out our gallery and see what other people got to fit on their truck! Just type in your vehicle Make, Model, and Year and the suspension/wheel/tire setup your looking to do and it will show you what other people have done to their rides including rubbing and trimming details! customoffsets.com/gallery
Question can I run 20x10 with negative 25 offset with Nitto ridge grapplers 35by12 on 2017 ram 3500 SRW mega cab Cummins diesel with a leveling kit 2inch by bds?
Im running a 3.5 in front level 1.5 inch rear supreme suspension level kit stock 20's with 35x12.5x20 minor rub at full crank, annoys the heck out of me ,gonna go bds 6 inch with some motto metal 962
I’m running Nitto Trail Grapplers 33 X 12.5 R20. No trimming. Rubs the inner fender well in a spot about the size 1”x2” at full turn. I have 3” leveling blocks on the front.
Do 3rd gen rams so I know what I can fit on my stock ram I’m running a 305/55/r20 on stock ram rims but I want know what offset rim I can run new tires and rims and have the stance I want
All right I have an old f150 a 1990 4x4. Now is there any stock wheels from any truck about 16 or 17" that will fit my ford bolt pattern. My truck is stock 5.0 auto. but I'm running 33/12.50/15's on a 10" wheel I'm going to drop down some sizes and was wanting to know what stock stuff was out there for tire buying to be easier. Thanks
It's still a Dodge...some idiot decided to separate Ram from the Dodge name... I appreciate this video, I am looking to do a leveling kit and rims with my 2016..Just waiting to hear if I can just drive up there and get it all done.
I have a 2017 ram 2500 power wagon 6.4 hemi I want to run a set of 22'' rims with a/t tires is that a good set up on that truck? I believe that power wagons sit up slightly higher than factor...
Hey guys! Im brand new in to the truck game and was hoping you could tell me if my set up will work. I have a 2009 Ram 1500. I've ordered the 6" Rough Country lift kit Plus I just got my 3" Daystar body lift kit so into total it will be a 9" lift. Now my wheel set up are those incredibly gorgeous Vision Spyder wheels that are 22" by 14" wide and have that insane -76 Offset! lol. The tires I installed on them are the 37" by 13.50 . I am 100% sure I will still require some trimming but will it work? I should receive my kit by the end of this month. Thanks in advance!
I have a 2014 dodge ram 1500 Tring to put on 20x11.5 -40 dx4skulls and the new venom tire 33. Is this possible with a stock suspension. And how far will it stick out of fender. I checked all the photo on gallery . But I see nothing that's similar or I know know if they put in correct info . I was looking to order this weekend . If u can advise. That would be greatly appreciated . Thanks guys
Hey custom offsets crew what's your opinion of the 2wd 6 inch rough country lift for the ram 1500? Would you put a 2wd hemi on a lift or just level it? I'm thinking of running 35's either way
4th gen Rams all day!
Nah second gen
Finally yall showing us RAM GUYS some love !!!! #RAM
2010 dodge ram 1500 with a 3 inch leveling kit, 20x10 -24 wheels, and 33/12.5/20. I get compliments all the time.
I put 35" toyo RT on 17's,. 3" leveling kit and -34 offset Racelines.
Eibach truck springs,
Bilstein 5100
Ready lift UCA's
Hellwig rear sway.
All good!
2018 Ram tradesman.
Lake Havasu ☀️ AZ
My truck made a custom offsets video 😂
Which one?
My ram 2012 1500 4th gen 4x4 big horn crew cab. I’m running 35/12.5/20 toyo open MT’s tire and xtreme Mudder wheels combo with leveling kit 3.5in front and 2.5 in rear and installed RC 3” body lift kit with 4” RC adjustable monotube rear shocks and RC 2.5” lifted loaded front struts. And 3” wheel spacers. Absolutely love the look. Easy install on suspension and body lift if your not dumb and have tools. Can’t go wrong with the cost. No extra trim was needed or rub issues
2015 RAM 1500 with 3.5 suspension lift With 37x12.50 on 18x10 w/ -24 offset. Had to trim a lot, not just the plastic but the part of the metal corner piece of the fenders too.
20x10 12.5 33s 2014 ram 2.5 level ... will be arriving this week! Can't wait to add my truck! To the gallery!
Can't wait to see it!
On my 2014 ram I ran 35x12.50 on 17 inch methods with 0 offset. No rub and no trimming.
This is what i’m going for. How well did it clear the upper control arms?
@@bradweit9034 I was using icons tubular UCA’s so I didn’t have any clearance issues
4th gen starts at 2009 not 2010 boys. Good vid though👍
Technically the title is right , Ram separated from dodge in 2012 and 4th gens are 09-18 1500 10-18 2500-3500
Correct me if I'm wrong but I thought they separated in 2009, for all truck models? I even googled it and got the same answer, but I've seen more than one person say the same thing you're saying. Ps sorry, I'm obsessed with ram/cummins trucks lol
@@brandonlins7004 nope 2012 , they were still dodge ram until 2012 then it was ram
I'm a 4rth gen owner of a beautiful gray on black, 5.7 hemi monster ,hahaah like it's my 5th child and I treat it as so. She is so beautiful and powerful, I wouldn't own any other year of truck, I've owned a 2010/2014/2016 ..and none of them have been as awsome as this truck....
Aftermarket manufacturers having lots of returns because they're just figuring out '19 ram1500 "CLASSIC" is a 4th Gen. Truck
Can't wait to do this to our new 2019 Ram Classic.
got a 2019 classic as well what lift and wheels are you going with?
I feel like Chris Tucker talking to Jackie Chan in Rush Hour watching this video.
"Do you understand the words that are coming outta my mouth?"
I'll just email you guys when it's time for wheels and tires lol.
I’m running 22x12 w33x12.5 with only a level kit on my 2017 ram, no trimming, no rubbing at all.
By that math a 35 on that same rim should fit just fine with the billstein 5100s
As ram man I appreciate this info as I was a little bewildered as how to get RAM started now I got mad ideas...
Got me still looking at tires tbh
I will say it any way, it is Ram Trucks. Has been since 2009!
RAM … c’mon Fuller … we all know that you are secretly warming up to the RAMs. Your secret is safe with us, brother. #ramforthewin
🙄😂
I like this what fits.!!!
Agree, should do more videos like this
I have a 2103 Ram1500 it’s leveled out with a 2”drop in the rear I have 20x12-44 wheels and 33x12.5 tires.. no running, no triming of any sort
I had 35s on my leveled ram it was beautiful
No trimming or rubbing
325/50/22 nitto ridge,hostile fury, 6” zone lift, bilstein rear, fox adjustable front 🤙🏻💯
im running 33x12.5 nitto ridges 20x12 -44 on 16 stock suspension 0 rub anywhere. bless the rams
I’m running 33x12.5 on 20x12 -44 with no rub or trimming on a level kit
Joey P what size level did you go with?
Dodge Ram 1500!! Nice guys NICE. Thanks!
You should do a video on what fits a 1994 to 2001 Dodge 1500
just got my 4th gen ram, i want it a bit lifted, and my tires to be out a bit. not too much. what does everyone recommend ?
20x10 _19mm offset....12.5 33s... 2.5 front level
It's been 9 months... did you pull the trigger? My setup should be arriving this week!
I invite you guys to the Ram group in fb and almost everyone with a leveling kit is running a 35x12.50 tire
Yep I've seen that too. Mines stock and I'm running 33-11-20s
I did also, until I got my 6” lift with 37’s and 18” wheel for proper off-road driving
The Messican232 what is the groups name?
I'm going to look for that group
No rubs ??? Or trim??
I have a 2017 dodge ram 1500 2WD ima install a 7”inch MaxTrac lift and ima go with 24 by 14 American forces with 35 inch tires I probably gonna have to trim just a bit
Actually quite informative. Very good and to the point 👍
Ran a 35 x11.5 20 Terra grappler on RC leveling kit vision arc -25 slight rub and ended up 6 inch superlift same wheels & tires
Running 18 ×9 rbp assassins and 35"x 12.5" and no rub or trim and I can keep my mud flaps. Oh and to note just a leveling kit is all
What size leveling kit if you don't mind me asking ?
2.5 inch
Got it off American truck sight and when done was like 1/16 of an inch to 1/8 different from to back
@@tylerlaubenthal5563 will they fit with a 2" leveling kit ?
35x12.5 on mine with 5100 level. ridge grapplers. just have some minor rub at full lock fuel tritons. inner fender well... literally need to zip tie the fender back. bils are set at 2.0
I have a very similar set up!
Love it.
Lake Havasu ☀️ AZ
What level y’all have to run 35 does a 3 work?
I have a 2014 ram crew cab1500 with a 6 inch zone lift. I have -24 xd x10 in rims now can I use -44 12 inch wide rims with out any finder rubbing. I'm running toyo 35 open country extreem at.
Do you guys think that I am able to put general grabber apt tires on a 20x12?
As long as the size allows it don’t see why not
@@CustomOffsetsTV ok thanks
Running a 35x12.5 on a 20x12 with a leveling kit and only shaved punch welds a bit.
What offset you got?
I'm running 33x12.5R24 on 2013 dodge with no rubbing, All I have installed is a 2in leveling kit.
That’s what I’m trying to do so I would need a 2in leveling kit? I was going to do it stock
What size tire fits 2016 ram 1500 4x4 with 2inch leveling kit with no trim
Michael Neuhaus I ran 35’s on my 2014 ram with a 2.5” level without any rubbing on the factory sport wheels. I’ve also got a buddy that ran a 20x10 -19 with 35’s without rubbing.
One of the funniest intros ive seen for a while
Great info gents....keep up the great work
Running a 37x13.50x24 on 24x14 on a 9 inch lift with plastic trimming
How about, what fits on the Toyota Tacoma, one of the most reliable, popular trucks on the market right now.
Check out our gallery on our website! It will show you what others have made fit on their Toyota Tacoma!
www.customwheeloffset.com/wheel-offset-gallery
35s on 22x12s with very minor trim -51 offset DaVinici's. YES!
I was thinking same but with 37s what size lift?
@Anthony hamoui 4" BDS. It's funny since I wrote this 4 months ago I put the Rough Country pre loaded struts for 4" lift on. For some reason I was rubbing the plastic inner fender like crazy. I ended up having to trim about 3" of the plastic off to get my tire to stop rubbing. It didn't change my height so I don't know why.
Could I fit a 20x10 -19 with a 33.2x12 on my Ram 1500 with stock suspension with no run or trim?
Look here man! bit.ly/356S1H6
Yes. I did, that's a good set up. Built mine up a while later more...
Lake Havasu ☀️ AZ
My 2016 has the dodge ram logo
Got a 2016 Rebel with air suspension and trying to not add a lift nor leveling kit. Really want 17x9 wheels and 305/70/17 tires 10 wide. I need help!
Hoping for “what fits a 5th gen” soon?
i have a 2017 Ram 1500 with a 6" lift and 37x12.50R20x10. Toyo Open Country MT. Some trimming of the side/rear of the plastic airdam and a little behind the front tires on the metal. It seems that you get the rubbing when the suspension compresses on uneven ground and backing up when turning. Im now wanting to go with 22" wheels by 12" wide and either 37" tires again or 35".
so i have a 2018 limited with the air suspension and i put some adjustable links in the front so i’m wanting to run 20x10 -24 offset with 33x12.50 will that setup work with minimal plastic trimming thanks
Check out our gallery and see what other people got to fit on their truck! Just type in your vehicle Make, Model, and Year and the suspension/wheel/tire setup your looking to do and it will show you what other people have done to their rides including rubbing and trimming details! customoffsets.com/gallery
Nate Frieden I ran that set up on my rebel at factory height without any rubbing or trimming.
This helped a lot I just bought a ram 1500 just didn’t know muvh
I don't think it matters what comes next, just keep theses coming! But mix it up to keep us on our toes... Maybe some yota's (Taco's or tundra) ;)
Great video guys
Question can I run 20x10 with negative 25 offset with Nitto ridge grapplers 35by12 on 2017 ram 3500 SRW mega cab Cummins diesel with a leveling kit 2inch by bds?
Check out the gallery on our website and see what others have made fit on their 17' Ram 3500!
customoffsets.com/gallery
Im running a 3.5 in front level 1.5 inch rear supreme suspension level kit stock 20's with 35x12.5x20 minor rub at full crank, annoys the heck out of me ,gonna go bds 6 inch with some motto metal 962
I have a 13 with a Zone, 6 inch lift with 37s and I have NO RUB and NO TRIMMING
Good info I just did 6 1/2 lift with 20 x10 37x12.5 -18 offset minor trims 💯🤙🏻
I'm about to have almost the exact set up installed on my 17 ram next week. How much trimming exactly did you have to do? Really wanted to avoid it
2017 Ram 1500 regular cab, lowered 2-4 on stock wheels.... what fits? Lol.
I have a 09 dodge ram 1500 rwd. With 17inch stock rims, was wondering if I could put 18inch rims on them? Will it affect anything?
Check out the gallery for fitment help man! customoffsets.com/gallery
Let's look at 3rd gen dodge Ram Gas/ Diesel
Go ram!!
I have 2010 ram 1500 with leveling kit 33x12.50r20 20x12-44 with no rub no trim
Richard Lynch I second this . 2011 ram 1500. 20x12 -44 with no rub whatsoever.
I have the same setup on my 2017 Ram 1500. Slight rub at full turn.
What brand tire are you running. I am looking at running 20x12 with 33x12.50 r20 on my 2019 ram.
I’m running Nitto Trail Grapplers 33 X 12.5 R20. No trimming. Rubs the inner fender well in a spot about the size 1”x2” at full turn. I have 3” leveling blocks on the front.
There is also a 2019 4th gen Ram 👍
2019 Ram1500 "Classic".. Is a 4th Gen Ram.
Do 3rd gen rams so I know what I can fit on my stock ram I’m running a 305/55/r20 on stock ram rims but I want know what offset rim I can run new tires and rims and have the stance I want
You guys should do the dually aswell
my ram has the four doors, but the cab isnt as big as the ram in this video...will these still fit on my ram as well?
Quad cabs and Crew cabs will have the same fitment 🤘
A what's fit my dually would be amazing!
I run 35x12.5r20 tires on stock 20s with .25" spacers with no rub or scrub at all and no trimming at all with a leveling kit.
Could you fit without the spacers?
@@sabianfarhood138 I didn't even try without the spacers so idk honestly.
Make a what fits 2002-2008 dodge ram 1500
14-18 GMC Sierra
All right I have an old f150 a 1990 4x4. Now is there any stock wheels from any truck about 16 or 17" that will fit my ford bolt pattern. My truck is stock 5.0 auto. but I'm running 33/12.50/15's on a 10" wheel I'm going to drop down some sizes and was wanting to know what stock stuff was out there for tire buying to be easier. Thanks
You'll just have to do research to find what other stock wheels have the same bolt pattern and that will fit size wise.
16-18 silverado 1500
20x10 -24 offset 33 12.5 with a leveling kit.
Is it safe to put 22x 12 with 42's with a 6'lift and 3'body lift on a 2015 RAM 1500 sport?
Check out our gallery!
bit.ly/2Duz7yo
Custom Offsets I did...no results for 42 tires🤯
Shivam Sharma shoot us an email to info@customoffsets.com 🤙🏼
What about a 2009 dodge ram 1500?
Yep!
It's still a Dodge...some idiot decided to separate Ram from the Dodge name... I appreciate this video, I am looking to do a leveling kit and rims with my 2016..Just waiting to hear if I can just drive up there and get it all done.
I have a 2017 ram 2500 power wagon 6.4 hemi I want to run a set of 22'' rims with a/t tires is that a good set up on that truck? I believe that power wagons sit up slightly higher than factor...
22x10 with a 35x12.5 is the way to go. It will just barely rub the plastic inner fender at full lock turning.
What about 20 by 12 with 1.5 spacers. 2017 ram. Could u get away with a level or do u need 4 or 6 inch lift
anyone ran 22’s on stock suspension?
looking to ditch my stock 20’ wheels
Check our gallery out for fitment help on your vehicle here Zehvz! - www.customwheeloffset.com/search-wheel-offset-gallery
Running a 35x12.50 on stock rims with just a level
How big of a level? Jus 2 or 2.5?
Got any pics of it
That is what I’m going to try just ordered a 3 inch 🤷🏻♂️
Can you do a what fits on the 2019 Ram 1500?
What fits 2007-2013 silverado 1500!
this video was edited? it used to be 09-19 Ram 1500s
Hey guys! Im brand new in to the truck game and was hoping you could tell me if my set up will work. I have a 2009 Ram 1500. I've ordered the 6" Rough Country lift kit Plus I just got my 3" Daystar body lift kit so into total it will be a 9" lift. Now my wheel set up are those incredibly gorgeous Vision Spyder wheels that are 22" by 14" wide and have that insane -76 Offset! lol. The tires I installed on them are the 37" by 13.50 . I am 100% sure I will still require some trimming but will it work? I should receive my kit by the end of this month. Thanks in advance!
I have a 2014 dodge ram 1500
Tring to put on 20x11.5 -40 dx4skulls and the new venom tire 33. Is this possible with a stock suspension. And how far will it stick out of fender. I checked all the photo on gallery . But I see nothing that's similar or I know know if they put in correct info . I was looking to order this weekend . If u can advise. That would be greatly appreciated . Thanks guys
3rd gen rams next!!!!
Anyone know how I could get a 10” lift for a 2013 ram 1500
I have a 17 ram with a leveling kit running 22x14 on 33s minor cutting and minor rubbing
@zachadams thoughts on my same 17 Ram and set up running 20x10 on 35s no problem with no rubbing or trimming? Thanks in advance
Ok, now please show 5th gen
I'm rocking 35×12.5 on a level kit with no lift had minor plastic rub, lightly trimmed and its rocking with no rubbing.
Stock rims?
I noticed it says 10-18 Ram... why was the 09 excluded ?
2010 ram 1500 should I go with 4” or 6” suspension RC? I’m 4wd
Whichever look you’d like better!
You guys should do some toyota tundras
Hey custom offsets crew what's your opinion of the 2wd 6 inch rough country lift for the ram 1500? Would you put a 2wd hemi on a lift or just level it? I'm thinking of running 35's either way
lots of people lift 2wd's walter!
2020 ram classic , 2.5in leveling kit, 22x12 on 33s mt’s no cutting or trimming, little rub at full turn
Just found out I’m running stock suspension on the 22x12 , will I get bad angles if I run a 3in leveling kit?
70-80s chevy k20 square body
I think 6 inch lift with 22 by 12 is the best look
I love the intro 😂🤣
I run a leveling kit on my 2018 ram 1500 with 35x12.5s with no rub, it can be done
On stock wheels? And the 2.5" leveling kit?
I’m going to try it I just ordered a 3 inch
I'm running 35×12.50r20 on my factory wheels, with a 2.5" level and tiny rub on the front sway bar...
With all of this work the same on a 09 ram 1500 2wd 4th gen?