I am creating a similar project for the last 2 months with ESP32 board, relay module, Flutter-based Android app and all of these are lot of work. But information in this video is real cool. I can do what I wanted pretty easy.
I was searching for a project regarding a perfect home automation using the ESP32 and I think you are the perfect person to make the project a success. So the concept is that one of the ESP32 will be connected with the router and other ESPs will be connect to the master ESP through mesh networking in sperate rooms. And using HTML we can make a dashboard for controlling the appliances and since it's connected with the router with a IP so anyone in the house can access the IP to control the respective appliances. This can also help in combining the projects like automating the water tank, smart door bell, home automation and many others. We will also be able to see which room is consuming how much electricity per month. That's my one of the most desirable project and in my eyes you seems the perfect person to make this projects and codes work. Looking forward for your response.
@@techiesms I have already seen that video many times but my question was something different.. It was like making custom dashboard using HTML which anyone can access if they are connected in the same wifi network. And that project is dependent upon Blynk server, isn't there another way?
@@techiesms actually I made a similar feedback in web interface but didn’t know how to do it so I used a esp32 and a nano to do this!!! This just made my life easier!!!!🙏
Great work bro, your all projects are simple & well explained. One request to you, can you make this project with nodemcu, ( 1 fan & 2 or 1 switch). We will be greatfull
If we purchase $2.99 plan monthly plan do we have to buy every month or just one time(if we buy for one month and variables are added and if we not buy nxt month does the project stops working)?
Amazing work! I would love to see the controller in the Alexa app as a Fan Controller instead of a light controller as it was showing brightness level info.
Sir I make a project using esp32 and 4 channel relay. The project works fine on after uploading but after power interruption or when reset button is press it doesn't work and there is a single led glowing in dim light on the relay. Please help me how to solve this problem.
@@techiesms could you make a video about home automaton where we don't have to relay on the "Cloud" I personally like to control my own hardware and what runs on it. I use blink server. I'm still learning how this works thanks to your videos. Thanks !
Please Brother created a project with 433 MHz RF Transmitter and Receiver: module using three relays to turn FAN HIGH, MEDIUM AND LOW setting and light ON or OFF.4 channel
Can't we upload the Wi-Fi user name and Password in the Application Itself??? Do we need to buy and later should enter wifi credentials in the program???
Woahhhh !!! You rock !!!! Gonna try this super sooon. Pls try to make a video on esp project with includes adding wifi details over air, then it will be fully functional.
@@techiesms i already saw this but I'm facing problem in merging this with my original code !! Maybe you can help with that or make a video on that coz lot of people face this problem !!😅
Hi realy a great video. But I didn't got one thing like how esp board is getting status of light when its gets on/off manually by switch. Please help me on this. Thanks
I don't know how he did that in the video. But there are many ways To do this you must know how to turn on a regular LED with a 220v AC current with a regular button switch. Once you achieve this, then just read the state of an LED by digitalRead() through the ESP board using a PhotoDiode if it's on or off. But remember, use a photodiode to get the value, don't connect the AC mains directly to your ESP board.
@@dahlendo7513 Thanks 😊.. actually I have achieved this using two way switch and relay but my problem was like when light is getting on/off with manual switch I was not able to reflect this on my web portal.
@@ROHITGUPTA-ui5bf Once your ESP or any microcontroller recognizes the change in the Button state (if it's on or off). Then you can simply send the signal to the Client's web browser from the ESP's web server using the WebSockets.
This is the best IOT PCB and project made by AJU @techiesms. Try Google but you will not find it even from TECH STUDY STUDIO OR VIRAL SCIENCE who also makes good IOT Projects on HOME AUTOMATION.
I'd recommend getting yourself an Arduino or Elegoo starter kit online. They come with a lot of useful parts and also a good beginner's guide to circuitry and using the Arduino ide. You can also find the guide online by searching for "Arduino projects book". In addition to that, there are lots of great tutorials on youtube and other places. "Paul McWhorter" on youtube has a really great tutorial series that starts with basic projects and works up from there. Best of luck!
I love your projects and they are amazing. Watching from Nigeria for years. However, can i upload the code for this project through Arduino ide and not arduino IoT cloud? will it still work? Secondly, can you make a project with TTGO-TCALL with fan speed control and at least eight appliances to control? Thanks Sachin...
Hello friend, I follow your channel here in Brazil, would it be possible to create a motion sensor compatible with Alexa using an ESP8266 or ESP32? For Alexa to inform as well as the products on the market?
i have made this project ,everything is working is correctly but ,when i click to ON relay it go in off status and when i click off it go to ON status . please reply sir .
I have made this project. But not working. Can you tell me your project working is normally. Yes Or no My esp32 is same time cutoff internet connectivity Or same time i wil chng fan speed then light or fan all are of after few seconds only on ligh. Then any manual switch or fan knob not working..
All in one project do with fan With internet & Without Internet in arduino iot cloud... And manual switch..... This type of project not in RUclips sir... Pls 🙏🙏🙏🙏🙏 do i will tell u in comment box..
I have tried Tasmota, I even have my video on it on RUclips. Haven’t tried Home Assistant yet 😅 Talking about my own IoT cloud then I need to think about it
@@techiesms Try home assistant once.... And make your own cloud and take only one time charge , or might be for 5 years . And Renewal after every five years. I wish you luck
![Kodak Black - Sharp Vibes [Official Music Video]](http://i.ytimg.com/vi/oEV0OoLJeIs/mqdefault.jpg)
I am creating a similar project for the last 2 months with ESP32 board, relay module, Flutter-based Android app and all of these are lot of work. But information in this video is real cool. I can do what I wanted pretty easy.
I was searching for a project regarding a perfect home automation using the ESP32 and I think you are the perfect person to make the project a success.
So the concept is that one of the ESP32 will be connected with the router and other ESPs will be connect to the master ESP through mesh networking in sperate rooms. And using HTML we can make a dashboard for controlling the appliances and since it's connected with the router with a IP so anyone in the house can access the IP to control the respective appliances. This can also help in combining the projects like automating the water tank, smart door bell, home automation and many others. We will also be able to see which room is consuming how much electricity per month.
That's my one of the most desirable project and in my eyes you seems the perfect person to make this projects and codes work.
Looking forward for your response.
I already made that
ruclips.net/video/yZvhygHA_sw/видео.html
@@techiesms I have already seen that video many times but my question was something different.. It was like making custom dashboard using HTML which anyone can access if they are connected in the same wifi network. And that project is dependent upon Blynk server, isn't there another way?
You can take the code for reference and easily create an HTML page
It won’t be that difficult
@@techiesms I will surely try to make this stuff and will let you know if it was a success or not
Sure
Wow u have all the very exact details I’ve been looking for, for a long time!!!!!!👍👍
Happy making 😇
@@techiesms actually I made a similar feedback in web interface but didn’t know how to do it so I used a esp32 and a nano to do this!!! This just made my life easier!!!!🙏
Circuit diagram is not visible is it international or some error because i want to look at how you build the whole circuit!
Bro, would you add touch switches into this..??
Great work bro, your all projects are simple & well explained.
One request to you, can you make this project with nodemcu, ( 1 fan & 2 or 1 switch). We will be greatfull
If we purchase $2.99 plan monthly plan do we have to buy every month or just one time(if we buy for one month and variables are added and if we not buy nxt month does the project stops working)?
Op (over ⚡⚡power) Project bro lol (lots of love )from Godhra
in case circuit itself stops working, manual switches become useless
In case your home manual switches stops working, your home lights,fans,etc become useless 😂
Amazing work! I would love to see the controller in the Alexa app as a Fan Controller instead of a light controller as it was showing brightness level info.
Pls show how to connect the fan regulator to the esp32 board.
Great Boss. Request to Please make it with soft coding for entering wifi credential to NodeMcu as well as Alexa . This is excellent project.
If you can make this project with node mcu it will be very helpful
Sir I make a project using esp32 and 4 channel relay. The project works fine on after uploading but after power interruption or when reset button is press it doesn't work and there is a single led glowing in dim light on the relay. Please help me how to solve this problem.
Awesome project 🔥😍
Thanks 😊
@@techiesms could you make a video about home automaton where we don't have to relay on the "Cloud" I personally like to control my own hardware and what runs on it. I use blink server. I'm still learning how this works thanks to your videos. Thanks !
Dood, your projects are cool
The Gerber file is not attached with the article. Kindly attach it so we can study it.
hehehehhe..again and again...i do really appreciate and love the way you did the presentation...big thumbs up
Thank you so much for appreciating our hard work 🙏🏻😇
actually i want to purchase the pcb but i cant proceed (i stay in singapore)
Great project, well done, is it retains relay status when power resume
I am getting error while compiling. 'fan' was not declared in this scope
Amazing work. 👏👏👏
nice video what is the file for the pcb.
Home automation system se. Submersible pump keaa chalay
Please Brother created a project with 433 MHz RF Transmitter and Receiver: module using three relays to turn FAN HIGH, MEDIUM AND LOW setting and light ON or OFF.4 channel
Sir I want TO make Internet controld 4wd tyre robot Survaliance plz make circuit to control it..with extral relay to do another operations
Sir can you provide bare pcb
Really straightforward guide with lots of great information, nice work!
Thank you so much for appreciating 😇
brother if we want to change wifi credentials later can be do it and how?
If I want to change Wi-Fi credentials can we change without hard code or through mobile app
Brother , how to add more rooms like Bedroom 1 ,bedroom 2, hall , living room please make full video
Bro please do this same project with ESPHOME and explain the code .
Mobile IOT remote not working .
its show "Unlinked property"
Please help.
Hi , please make a 4 appliances project using AWS iot . There are very few resources, thanks in advance
We will try
Can I use it with Google Assistant too...rather than Alexa?
Hi friend make rf remote and wifi home automations project ple
Can we add wifi manager in new arduino iot cloud ??
Timer Schedule supported?
Can you make a board that combines node mcu esp8266 + wifi manager + blynk +relay and 4 switches to control?
what is the part number for fan regulator
Can't we upload the Wi-Fi user name and Password in the Application Itself??? Do we need to buy and later should enter wifi credentials in the program???
Can we use NODEMCU ESP8266 instead of ESP 32
Sir please make this project with nodemcu👍
Woahhhh !!! You rock !!!! Gonna try this super sooon. Pls try to make a video on esp project with includes adding wifi details over air, then it will be fully functional.
Here it is ruclips.net/video/4DD2DeFj08Q/видео.html
@@techiesms i already saw this but I'm facing problem in merging this with my original code !! Maybe you can help with that or make a video on that coz lot of people face this problem !!😅
Try this for using over the air "AsyncElegantOTA"
@@jitendrasonavane82 can you pls share any video or tutorial related to this?
@@aryanthacker2362 I do not have videos ,but can share code separately.
Hi realy a great video.
But I didn't got one thing like how esp board is getting status of light when its gets on/off manually by switch.
Please help me on this.
Thanks
I don't know how he did that in the video. But there are many ways
To do this you must know how to turn on a regular LED with a 220v AC current with a regular button switch. Once you achieve this, then just read the state of an LED by digitalRead() through the ESP board using a PhotoDiode if it's on or off. But remember, use a photodiode to get the value, don't connect the AC mains directly to your ESP board.
@@dahlendo7513 Thanks 😊.. actually I have achieved this using two way switch and relay but my problem was like when light is getting on/off with manual switch I was not able to reflect this on my web portal.
@@ROHITGUPTA-ui5bf Once your ESP or any microcontroller recognizes the change in the Button state (if it's on or off).
Then you can simply send the signal to the Client's web browser from the ESP's web server using the WebSockets.
You have to give mains wiring to relay only. Remove the mains wiring from switch and connect the switch to esp pins as input.
Can we control this by Google assistant
Hi Sachin Please clear this
@@HariKrishna-tc1hu nope u can use sinric for that
Can we use same code with node mcu
Whitch commad to control fan speed
With alexa
Good one !🎉
This is the best IOT PCB and project made by AJU @techiesms. Try Google but you will not find it even from TECH STUDY STUDIO OR VIRAL SCIENCE who also makes good IOT Projects on HOME AUTOMATION.
Is it possible to hard-coded Wi-Fi password and SSID in the new Blynk 2.0
hi, ArduinoIoTCloud.h error what i want to do???
is switch pulse or latch?
Please make it with esp8266
Bro can you make a esp to esp communication like remote control of relay
Transmission end - Esp + push button
Receiver end - Esp + relay
above link is not working and can't able to read your article
Please make video on home automation using home assistance local server.
Design smd chip level board for more compact
Great project sir...Can i do it for my home...its possible??
Yes
Code is not working, displaying error message
Woah 🤩 thats a cool project, can you give some suggestions where to learn Arduino ide programing
I'd recommend getting yourself an Arduino or Elegoo starter kit online. They come with a lot of useful parts and also a good beginner's guide to circuitry and using the Arduino ide. You can also find the guide online by searching for "Arduino projects book".
In addition to that, there are lots of great tutorials on youtube and other places. "Paul McWhorter" on youtube has a really great tutorial series that starts with basic projects and works up from there. Best of luck!
Yeah
Even I would have suggested searching for RUclips videos
Thanks for your suggestions 🙂 I will check them out
i just completed 12th standard and i need a little assist about course what you have studied
Bro what if i want to make this same project with same arduino iot cloud but with esp8266 board ....
Please help .
Thanks in advance ❤️
2.2E rasistar burn and fan on/off/on/off
I love your projects and they are amazing. Watching from Nigeria for years. However, can i upload the code for this project through Arduino ide and not arduino IoT cloud? will it still work?
Secondly, can you make a project with TTGO-TCALL with fan speed control and at least eight appliances to control? Thanks Sachin...
can you share gerber file for this project
Hello friend, I follow your channel here in Brazil, would it be possible to create a motion sensor compatible with Alexa using an ESP8266 or ESP32? For Alexa to inform as well as the products on the market?
Can you upload the gerber file?
Hello dear please share the Gerber file
Can I convert my API to MQTT broker ?
any help please
Brother can i get the gerber file of this project?
Is it possible to control fan speed with tasmota?
How to start my own Android app Home Automation please give answer bro
Great project ♥
Thank you! 😊
It's will be working in Google assistant and siri
is this work without Internet?
I want to buy this product. 3 I want
Bu videoyu Türkçeye cevirebilirmiyiz
Please solve this issue
Sir, how to control ESP32 from anywhere or worldwide without any third party websites or mobile applications?
Please make a video of cctv camera convert into AI camera.
i have made this project ,everything is working is correctly but ,when i click to ON relay it go in off status and when i click off it go to ON status .
please reply sir .
I have made this project. But not working. Can you tell me your project working is normally. Yes Or no
My esp32 is same time cutoff internet connectivity
Or same time i wil chng fan speed then light or fan all are of after few seconds only on ligh. Then any manual switch or fan knob not working..
Plz rply
How to make.. You your project. If any chngs coding...
And yor problem I will help u
When are you making a tutorial video on ar glasses
Dude
I haven’t made AR glasses
That was just a concept
But yes I have made an AR android app that can do all that stuff shown in the reel
Sir nice video i need to know something about this
Ya go ahead
Ask me here
pcb gender file link is missing
All in one project do with fan With internet & Without Internet in arduino iot cloud... And manual switch..... This type of project not in RUclips sir... Pls 🙏🙏🙏🙏🙏 do i will tell u in comment box..
Hi Mate nice project
Thanks
Can we get pcb of this project with your merchandise
No,
Rather you can get the complete project
Link is in the description and also in the article
Can we use esp8266
Bro use google assistant pleas bro
we can add the Blynk and adafruit to alexa
Sir website not working
bro, i need a favor with u
can u help me with that
can you write code for me
How much variable add in without paid version
5
please provide gerber file
Awesome!
No
As we are selling this project, we didn’t provide any details
Krishna have you got the garber file? Plz give me also
Have you tried Tasmota, Home Assistant ?
And when would techiesms itself have its iot cloud.
We can pay you not to others.😀
I have tried Tasmota, I even have my video on it on RUclips.
Haven’t tried Home Assistant yet 😅
Talking about my own IoT cloud then I need to think about it
@@techiesms Try home assistant once....
And make your own cloud and take only one time charge , or might be for 5 years .
And Renewal after every five years.
I wish you luck
@@techiesms you have your own hardware , now you should have your own app and cloud
sir please give me this code ....your website is offline
techiesms.com/a-perfect-home-automation-project-for-your-home-office/
API available in arduino IOT?
not in free version
I just can't get over the fact that we need 5 relays to control the regulator.. Surely there must be a better way 🤔
We need 3 relays(not 5) to make a 4 speed control fan regulator,
Watch this video to know the concept ruclips.net/video/kMqcRaBRDRY/видео.html