very exciting pipe cutting by power grinder/ 6 inch pipe must watch

To cut a 6-inch pipe using a power grinder, follow these steps:
Safety First: Wear appropriate safety gear, including safety glasses, gloves, and a dust mask.
Preparation: Secure the pipe in place using a pipe vise or clamps to ensure it doesn’t move during cutting.
Mark the Cut Line: Use a marker or chalk to clearly mark where you want to cut the pipe.
Choose the Right Disc: Attach a suitable metal cutting disc to the power grinder. Ensure it's rated for the size and type of pipe you are cutting.
Cutting: Position the grinder at a slight angle to the pipe. Turn on the grinder and slowly guide it along the marked line. Do not force the grinder; let the disc do the work.
Check the Cut: Periodically stop and check the alignment and depth of the cut to ensure it's straight and accurate.
Clean Up: After cutting, remove any burrs or sharp edges using a deburring tool or a file.
Disposal: Dispose of the pipe remnants and any debris properly.
Always consult the power grinder's manual for specific instructions and safety warnings related to your model.
#pipecutting #cuttingskills