You sir, are a true lifesaver. Unless my search-skills are as bad as my temper before watching your video, none of this is (well) documented on Bittitan's help pages. Thanks again!
first time migrationwiz user and could not get past the unauthorized errors even with BitTitan's "email support". ran through your steps and all was resovled!
"Sorry, you cannot re-enable Basic authentication for Exchange protocols anymore. You will have to work on guidance in the article linked below to upgrade your client applications to utilize Modern authentication to connect to Exchange online. " :(
Wizard! #3 worked for me,, for sure needed to wait 20 minutes for the change to take affect. Bittitan support is a 0/10 these days. They used to be great. Thank you!
many thanks for this. by the way, one gotcha i just had - when i opened help and support (so you can type in Diag: enable basic auth in exo) it would not let me type anything in the search window! So frustrating. however, i went back to just normal 365 admin page and went to help and support and it was fine. really odd, very annoying, but a simple workaround. tried in both edge and chrome, adblockers off etc.
Am I right in thinking that MS doesn't allow admins to enable basic auth for particular protocols using method described @5:24? Do we need to enable basic auth for EWS through PS only now? Interestingly typing "diag: enable basic auth" in source tenancy only yields single KB for Basic Authentication. While typing same thing in destination tenancy gives few options including Self help diagnostics where it has link to run diagnostics and enable basic auth as you explained
We are glad that you found this video helpful!! Thank you for liking and subscribing to us, If there's anything else you would like to see let us know 😊🚀
The basic auth part led me to what I needed... Instead of enabling basic auth for EWS search their help center for 'Enabling Modern Authentication'. A little more work but more secure (took maybe 5-10mins to set up). I also had to disable SSPR even with MFA disabled on the account to get rid of the 'more information required' screen.
Thanks so much! We tried to use the help files and realised it wasn't clear, which had inspired us to create this video. We are delighted that you found it useful and we will make more if we spot anything else 😊
Thank you for the tips! I finally got our migration verified after half a day of messing around. Can I ask if you know a way of disabling basic auth afterwards? I have also subscribed!!
When I try to disable basic authentication via help and support, using 'DIAG', it gives me this message: Basic authentication will not be disabled for the selected protocol. Your request to opt out from disabling Basic authentication has been recorded. Basic authentication will be disabled for the selected protocol at a later date.
Thanks for this video. Does this support migration of MS Stream? Does this tool has scripting console to run PowerShell script? I means does it support pnp PowerShell ?
Hi there, currently no. You can't migrate MS Stream using BitTitan. If you just want to get a copy of Teams Meeting Recordings, these will move as part of a OneDrive document migration. Videos of Teams meetings are stored in the organiser's OneDrive under "Recordings". But you currently can't use BitTitan (or many other mainstream tools) to move the actual video and metadata from Stream. I think there is no API available for Stream which is why it's not supported by many migration tools. Powershell. Not specifically an option in the GUI to trigger a Powershell script so far as I know. However you can call BitTitan from Powershell so no reason why you couldn't build a Powershell script with your BitTitan actions in it as well as the other things you wanted to do.
Hi. Did all the steps but in tip #4, it complains that i dont have access to create, change or remove role assignment when i do the new-managementroleassignment. Any tips? Doing the migration from imap to O365
Sorry to ask a daft question. could you confirm if you are using a Global administrator account or an exchange administrator account? It sounds like a permissions issue. If it helps, we ran our example as a global administrator. 🚀
Some Exchange Online Commands require powershell to be run as admin aswell. Try to "Run as administrator" and connect to the global admin from there, and see if it works.
![[DRAGON BALL LEGENDS REVEALS ＆ STUFF] LEGENDS FESTIVAL 2024 Special Edition Part 1](http://i.ytimg.com/vi/mV5bGIswTtQ/mqdefault.jpg)
Users can no longer enable basic auth , do you have an updated video to include modern authentication ?
Hello, how do you do step 3 now that Microsoft disabled basic authentication ? It seems to be the blocking part for me.
You sir, are a true lifesaver. Unless my search-skills are as bad as my temper before watching your video, none of this is (well) documented on Bittitan's help pages. Thanks again!
Life saver. Much appreciated. Opened a partner ticket with BT to make this much clearer in the documentation.
first time migrationwiz user and could not get past the unauthorized errors even with BitTitan's "email support". ran through your steps and all was resovled!
Many thanks for the tip on ApplicaitonImpersonation. Might be worth mentioning that it could take an hour or so until this change kicks in too
"Sorry, you cannot re-enable Basic authentication for Exchange protocols anymore. You will have to work on guidance in the article linked below to upgrade your client applications to utilize Modern authentication to connect to Exchange online. " :(
Thank you! #3 & #4 were my issues. How do I turn off EWS after the migration is complete?
Wizard! #3 worked for me,, for sure needed to wait 20 minutes for the change to take affect. Bittitan support is a 0/10 these days. They used to be great. Thank you!
I knew #3 was my issue but couldn't find the setting to change! Thanks for the vid!
many thanks for this. by the way, one gotcha i just had - when i opened help and support (so you can type in Diag: enable basic auth in exo) it would not let me type anything in the search window! So frustrating. however, i went back to just normal 365 admin page and went to help and support and it was fine. really odd, very annoying, but a simple workaround. tried in both edge and chrome, adblockers off etc.
YOU ARE A GOD DAMN HERO!!
bruh Bititan needs to update their shit, this is un real... 10 hrs later fighting this BS that is literally not mentioned
So with MS deprecating basic auth complete,y anyone know a work around? I don't documentation from BItTitan side.
Am I right in thinking that MS doesn't allow admins to enable basic auth for particular protocols using method described @5:24? Do we need to enable basic auth for EWS through PS only now?
Interestingly typing "diag: enable basic auth" in source tenancy only yields single KB for Basic Authentication. While typing same thing in destination tenancy gives few options including Self help diagnostics where it has link to run diagnostics and enable basic auth as you explained
Step 4 solved my problem after working on this for about 5 hours. THANK YOU! Liked and subscribed.
We are glad that you found this video helpful!! Thank you for liking and subscribing to us, If there's anything else you would like to see let us know 😊🚀
The basic auth part led me to what I needed... Instead of enabling basic auth for EWS search their help center for 'Enabling Modern Authentication'. A little more work but more secure (took maybe 5-10mins to set up). I also had to disable SSPR even with MFA disabled on the account to get rid of the 'more information required' screen.
The step by step walk thru was glorious.
Greatly appreciate your time and efforts!
Security defaults was the issue! Thanks for the informative video!
Perfect Video!. im glad there're engineers like yourself out there helping us out.
Excellent job if only Bittitan could've given anything like this video to assist in getting this working. Thanks!!!!
Glad it helped! Let us know if there is anything else you would like to see from us 🚀
You sir are a life saver. Step #3 and #4 are what did it for me. I spent 5 hours before I found your video. SUBSCRIBED
Thank you for subscribing!! We are glad this video helped you 🚀
@@CloudNexus #3 is no longer supported in 2023. How can you get past this error now?
For 2023 it looks like this option has been removed from the support center, so how can one address this issue with the change?
You are brilliant, Bittitan should be paying you for this, thanks! (their help files weren't straightforward at all)
Thanks so much! We tried to use the help files and realised it wasn't clear, which had inspired us to create this video. We are delighted that you found it useful and we will make more if we spot anything else 😊
A lot has changed on 15-11-2023!
Security defaults are not on the properties anymore.
EXO has been permanently disabled.
Great video, I was just curious... How do you disable basic auth in EXO after the migration was completed?
Set-OrganizationConfig -EwsEnabled:$false
🔥🔥🔥 please keep posting common issues like this.. thanks.
Awesome stuff 🚀🚀🚀 I had a feeling this would be helpful! We just ran into this issue on a project and I thought it was worth sharing 🙂
Life saver, thanks for this video - basic auth for EWS issue for me
I guess you can no longer enable basic authentication when setting up Bittitan jobs. its been deprecated for security reasons.
Thank you for the tips! I finally got our migration verified after half a day of messing around. Can I ask if you know a way of disabling basic auth afterwards? I have also subscribed!!
I would like to know that too !
Set-OrganizationConfig -EwsEnabled:$false
@@brancoweissit5725 Awesome ! Thank you !
When I try to disable basic authentication via help and support, using 'DIAG', it gives me this message: Basic authentication will not be disabled for the selected protocol.
Your request to opt out from disabling Basic authentication has been recorded. Basic authentication will be disabled for the selected protocol at a later date.
how do you disable basic authentication once migration is over? Thanks for the video bittitan should pay you for this or link it on their site
Set-OrganizationConfig -EwsEnabled:$false
@@brancoweissit5725 Thank you!!
thanks for this I did not get this detail in their help and was starting to pull my hair
No problem Baron! We are glad we could help 😊🚀
Thanks for this video.
Does this support migration of MS Stream?
Does this tool has scripting console to run PowerShell script? I means does it support pnp PowerShell ?
Hi there, currently no. You can't migrate MS Stream using BitTitan.
If you just want to get a copy of Teams Meeting Recordings, these will move as part of a OneDrive document migration. Videos of Teams meetings are stored in the organiser's OneDrive under "Recordings". But you currently can't use BitTitan (or many other mainstream tools) to move the actual video and metadata from Stream. I think there is no API available for Stream which is why it's not supported by many migration tools.
Powershell. Not specifically an option in the GUI to trigger a Powershell script so far as I know. However you can call BitTitan from Powershell so no reason why you couldn't build a Powershell script with your BitTitan actions in it as well as the other things you wanted to do.
@@CloudNexus thanks. This helps a lot
This video saved my life 🙂
Hi. Did all the steps but in tip #4, it complains that i dont have access to create, change or remove role assignment when i do the new-managementroleassignment. Any tips? Doing the migration from imap to O365
Sorry to ask a daft question. could you confirm if you are using a Global administrator account or an exchange administrator account? It sounds like a permissions issue. If it helps, we ran our example as a global administrator. 🚀
Some Exchange Online Commands require powershell to be run as admin aswell. Try to "Run as administrator" and connect to the global admin from there, and see if it works.
Excellent explain in simple way👌
tried all 4 solutions but still getting 401 error, any tip please ?
VERY helpful, thank you so much!!!
BIG thank you for this!
No worries!
you are a life saver
Didn't fix it for me maybe some weird GoDaddy BS
I really hope this sh** works or I'm going to throw my laptop out the window, now waiting
Hi Alex,
How did you get on? Did this work for you? Hope you didn't throw your laptop out the window 😬
These instruction are now obsolete
WHY. ISNT. #3. IN. BITTITAN'S. KNOWLEDGEBASE. JESUS JUMP F'IN CHRIST. Thank you for the video, you are lifesaver, been f'n with this thing for 4 days.
Hey Steven, We are happy that you found this video useful! If there is anything else you would like to see from us let us know 😊🚀