There is a guy on here that repositioned the rear upper links to adjust the anti-squat. Most of the torque twist comes from the links. If you can create less link separation (distance between the lower and upper linl) you get more anti-squat helping prevent twist. Paired with the vitavon sway bar, this thing will be gold.
I put a 13t pinion & dual fans on the stock set up & it rips... I also put the hot racing turnbuckles for some toe out & put ear plugs in the rear diff.. which i will probably get the locker now watching your vudeo 👍
Once I get my new hw setup I'll go with a 15 or 16 tooth with the sensored 2400kv motor! The locker is worth it, even though straight line performance kinda goes down.
I know this video is old but wanted to say it’s a good upgrade …I’ve done the same on my baja rey and made a world of improvements. I recently got a hammer rey on sale and can’t wait to start upgrades.. locking the rear diff and center diff are the first things I’ll do….then a rear sway bar…I found locking the center diff on my baja rey keeps the front end from ballooning tires bad and spinning just one front tire like mad.
The place under the bridge would be awesome for some U4RC racing.. the rocks and the soft dirt. The place is Gold, where is this at? OH, and yest DAD reflexes where slow! I was like, is he going to save his son?" hahahahaaha. Great video!
This is in Helendale California. It's the perfect place for bashing, racing, crawling, and flying! I'm lucky to have such an awesome place to rip! Yes, that would be sick, the U4 racing. Haha yeah, the reflexes were a little late but hey, saved him lol.
did you see its on sale for $300 until the 25th. Iam going to get one, my green one iam going to modify and keep the red one stock(new one) at that price I cant say no. even as parts vehicle it would save in the long run. stock parts are way over priced.
I was following rccars on reddit and someone mentioned the deal and, I told myself, this is my time....I've been keeping an eye on this truck for some time, it looks awesome and at $323 with tax, it was an insanely good deal.
Thanks! I see vitavon has 2 different lockers. One for just the hammer Rey and one for the hammer Rey and another truck 🤔. When you upgrade to HW are you going to go with the quicrun se or pro? (1800kv vs 2300kv)
@@RCnurse my gears in the diff housing was worn out, I replaced them and filled with LM2 CASTROL grease, did few punches now on 3s and seems to be holding, the cogging is irritating though
@@RCnurse thank you for the help, today I am doing the middle diff, I see that some sticky resin is around that section, my baja rey has the old red motor fuze not the firma system, looks so awful cheap like surpass hobby,I want to go ahead and get the hw max 10 3200kv 140a g2, will that be sufficient.this truck actually behaves more like a trophy truck than my slash 4x4 vxl or senton 3s
Развлечения
There is a guy on here that repositioned the rear upper links to adjust the anti-squat. Most of the torque twist comes from the links. If you can create less link separation (distance between the lower and upper linl) you get more anti-squat helping prevent twist. Paired with the vitavon sway bar, this thing will be gold.
I'm going to try that! Thanks for the recommendation 👍👍
Wow, greatest video I've seen of the Hammer Rey. Long wondered if I should get one, but now Im convinced. The rear locker that did the tick.
I'm glad you like the video! The rear diff locker definitely made a huge, positive difference.
I'm still in the learning phase of RC trucks and stuff but I love my Losi :)
The hammer Rey was my first losi and I love it! Drives great. Only thing is the steering was super loose out the box.
I dig the music selection Bro.
Thank you, I try making enjoyable to watch. 👍
I put a 13t pinion & dual fans on the stock set up & it rips...
I also put the hot racing turnbuckles for some toe out & put ear plugs in the rear diff.. which i will probably get the locker now watching your vudeo 👍
Once I get my new hw setup I'll go with a 15 or 16 tooth with the sensored 2400kv motor! The locker is worth it, even though straight line performance kinda goes down.
I know this video is old but wanted to say it’s a good upgrade …I’ve done the same on my baja rey and made a world of improvements.
I recently got a hammer rey on sale and can’t wait to start upgrades.. locking the rear diff and center diff are the first things I’ll do….then a rear sway bar…I found locking the center diff on my baja rey keeps the front end from ballooning tires bad and spinning just one front tire like mad.
It definitely needs a tougher sway bar. I think that's the next item I'll get on it.
I hope you still live where you are cause that's awesome that you have empty lots at a walks length from your place lol
Bro, I live in rc heaven! I'm pretty fortunate. Thank you.
Hello,
Nice upgrade 👍
Realistic comportement.
Hi there! Thanks for watching!
@@RCnurse what is it the weight ?
@@zackfair7697 I'm actually not sure, maybe 10 pounds?
The place under the bridge would be awesome for some U4RC racing.. the rocks and the soft dirt. The place is Gold, where is this at?
OH, and yest DAD reflexes where slow! I was like, is he going to save his son?" hahahahaaha. Great video!
This is in Helendale California. It's the perfect place for bashing, racing, crawling, and flying! I'm lucky to have such an awesome place to rip! Yes, that would be sick, the U4 racing. Haha yeah, the reflexes were a little late but hey, saved him lol.
Nice!!!
Thank you! Cheers!
Thanks for this. Exactly what I want to do with this truck. What HW system will you install? Happy fathers day btw.
Max 8 g2 with the 2400kv sensored motor! Should be a great fit with plenty of room to gear up! Happy Father's day to you as well!
does graphite lube work in transmissions and diffs? The dustless stuff
I'm not sure. I use marine grease. Prevents corrosion, and sticky.
Friend, what was the biggest difference after you did this differential procedure?
Much better on loose gravel and sand imo🤛
Cool up grade what drill do you use to work on you’re model
Thanks man! Just a basic black and decker 1/4 hand drill.
Did you do something with the center dif?
Center diff is stock!
did you see its on sale for $300 until the 25th. Iam going to get one, my green one iam going to modify and keep the red one stock(new one) at that price I cant say no. even as parts vehicle it would save in the long run. stock parts are way over priced.
That's crazy! I might order one for that same reason. Thanks for the FYI!
I was following rccars on reddit and someone mentioned the deal and, I told myself, this is my time....I've been keeping an eye on this truck for some time, it looks awesome and at $323 with tax, it was an insanely good deal.
and what all is needed to swap to a solid rear? I want to grab everything in one order! Thank you.
Just the diff locker!
Thanks! I see vitavon has 2 different lockers. One for just the hammer Rey and one for the hammer Rey and another truck 🤔. When you upgrade to HW are you going to go with the quicrun se or pro? (1800kv vs 2300kv)
@@Cranklotus hmm well you may have to get the vitavon one. This one, Losi - LOS232011, is out of stock. That's the one I used. I use the quickrun pro
@@RCnurse thanks! Are you in the US? I see that losi locker available but it does say Baja rey.
@Cranklotus in usa.
Looks like az!!
High desert in cali!:
Can I find a diff locker for the baja rey 1.0
Ebay my friend. I think I actually got a losi one from ebay.
@@RCnurse my gears in the diff housing was worn out, I replaced them and filled with LM2 CASTROL grease, did few punches now on 3s and seems to be holding, the cogging is irritating though
@jooonsRC get a sensored system, max 10 g2. Perfect option for it. Plus I use marine grease
@@RCnurse thank you for the help, today I am doing the middle diff, I see that some sticky resin is around that section, my baja rey has the old red motor fuze not the firma system, looks so awful cheap like surpass hobby,I want to go ahead and get the hw max 10 3200kv 140a g2, will that be sufficient.this truck actually behaves more like a trophy truck than my slash 4x4 vxl or senton 3s
@@jooonsRC that max 10 g2 is perfect for it! You're welcome and good luck😄🤙🤙