Это видео недоступно.
Сожалеем об этом.
How to make motion sensor alarm
HTML-код
- Опубликовано: 19 мар 2019
- How to make motion sensor alarm
Share, Support, Subscribe!!!
Subscribe: goo.gl/WfYhoR
RUclips: / easytechzone
Twitter: / easytechzone
Facebook: / easytechzones
Instagram: / easytechzones
Google Plus: plus.google.co...
Cover songs collected from NCS youtube channel: / nocopyrightsounds
Song 1: • Video
Song 2: • Elektronomia - Limitle...
Song 3: • Electro-Light - Symbol...
~-~~-~~~-~~-~
Please watch: "How To Make 4x4x4 LED Cube"
• How to Make a LED Cube...
~-~~-~~~-~~-~
Curious what the tolerances and recommended operating ranges are of these components, in terms of power. If they’ll accept 9v, might they also be able to handle 12v?
I’d like to have a similar system, with a car alarm siren as the buzzer. The siren requires 12v, of course, and I’d rather not fry the circuit between the siren and the power source. Any idea?
*if not, if you don’t hear back from me, it didn’t work.
सर आपका वीडियो मुझको बहुत प्यारा लगा एक अनाड़ी नया सिखने वाला बड़ी आसानी से सर्किट बना सकता है।
Tq s bhai you made my day
Can I add 2 or more pir sensor to this same circuit. As I want to be sensed in more locations in house
Bro how can i increase delay time from 3 sec to atleast 30 sec between conservative motion detection ? plz reply thanks
can you use any bc547? I have tried this circuit and cannot seem to get it working so I assume maybe is the transistor I'm using
Can you use a bc 548 instead?
hi, Can you pease explain that why do we have to use a 220 OHM resistor from the transistor "B" terminal to PIR out terminal. Please explain. what happen if we don't.
Any chance you can link to where one can buy these?
Good and easy. Thanks.
Tx for posting this .is the buzzer activ or pasive?
What is the Minimum distance of moving object before the alarm sounded?
Ruben Masanguid 12 or 10 m
Can I use different led light and buzzer for much higher sound and light?
What led light and buzzer should I use?
how many range required? 2Meters and above
Its good but i think pir doesn't work well if we place resistor in front of it...try using comparator which takes input nd gives output like in ir...otherwise it will continuously give high low voltage...as pir signal is very weak it just works with input.
Bro can you tell me that the transistor is working in as a switch or a amplifiers
Mai bhi aapke जैसा video banata hu
Female header
Pir sensor
220 ohm resistor
470 ohm resistor
Bc 547 transistor
Buzzer
5mm LED
9v batter
Whats is the range of pir sensor, and how we can adjust it
Upto 10 meter. Tested by me
Ok
Will it work the same way with 6v-12v buzzer
Do you have a link to a store page where I can buy the resistors
may l replace the buzzer with a 5v light
Is the resistor needed on the transistor base? Thanks
What is maximum range?
10 mtr
Very nice
How to make it with AC and siren
Can I get the circuit diagram U used to do this work
How can i connect with 2 motion detectors with only one Buzzer?
Friend i got a question it works.
But it works only as a motion sensor and not PIR sensor.
Because when i throw a towel in front of it the alarm Will go off.
I want it to go off only when it detects a large heat source and not lifeless objects like moving curtains etc
I have tried to adjust the sensititvy censor but no luck.
Need.your help to.tackle this
You need to use a HC-SR04 ultrasonic distance sensor for your purpose.
How did u adjust the sensitivity
Can we use 12 v siren in this, and if yes what changes we need to do
Do you have any idea how long this would run before it stops due to depleting the battery? Thanks
Not very long if it stays in retrigerable mode. I see in the video it has single cycle mode which will save the battery.
hi,
can you make video how connect buzzers and light bulb led?
Nice... Thanks...
Also please let me know :
220 Ohm Register - How many watt
register to be used ( 1watt, 1/2watt or 1/4watt ...)
470 Ohm Register - How many watt
register to be used ( 1watt, 1/2watt or 1/4watt ...)
Buzzer - How many volt buzzer to be used.
Also if I want to use the high power buzzer, then the circuit would be same.
Thanks once again...
Use 1/4 watt
My hc-sr501 gives always high output, what is issue?
how to make it on ac supply and using siren
How much price and from where can I buy it?
Can you send pcb layout for this project
Can i find the solder board online?
Yes
How to edit the time of buzzer sir?
What is the range of this sensor
What model of PIR IS THIS???
very nice
Is me buzzer kitny volt ka lagy ga
Buzzer kitne volt ka lagana hain.
5v
@@easytechzones thank
This curcuit run on 3.7v battery
Price for this
Arround 200
EASY TECH not really but okay. More like 30€
How to make the led stay on until reset?
isme 18650 battery laga sakte he kya. laga sakte he to kaise
Can I have in detailed circuit diagram please
pin header female 2.54mm or 2.00mm?
nice
Hello.. Bro.
Plz reply me....
Bro ye kaha par sara saman milega
Is buzzer 5v or 12v
5v
How can i increase sound??
Depends on buzzer. If you use another buzzer you you will get
Connect a megaspeaker to the source of the sound output that is powered by a powerful amplifier. If desired loudness is not reached. Connect heavy duty speakers to the amplifier, and a microphone at the center of output for the megaspeaker. Now the speakers are adding fuel to the expanding sound of the megaspeaker. Creating what we call a "sonic boom". Further increasing how much you can push the sound. The amplifier needs to be connected to a player with eq settings set to "loudness" for max effect. Ps. If you are able to change the alarm tone to a tune that break the db scales in Edison, add echo to scale it. Preferably a screaming elephant testing his SOS scream in colab with an alpha monkey frightened so hard he shits his pants. Also screaming for his life. You have now increased the sound. For increased result, create materials sustainable enough to not break while the alarm can be heard from some distance.
Sir,how to increase 20 metres distance and sound
Is ki coding mil skti ha Kiya...
The colour code of your 220 ohm the resistor is not correct
yes it is
Nyc
Bro 12 volt par par kese kaam karega
Not tried yet but I think it does Not work: Transistor needs a positive input at base but you feed it with negative input via 220 Ohm resistor. Other Parts are ok to me.
No,it is really WORK!The middle pin of pir sensor is actually OUTPUT pin which we can assume that as a positive to the base .Don't let that black wire colour trick you hehe 😎
Why when i put the 9v battery the buzzer still on
Can I hav a link to all the parts u got there please
Toby.in or electronicomp.com
LED delay gheun on hotay Kay falutugiri aahe yrrr
Plz send circuit digram
Bro resistor ka (+ '_ )kese pata kare please help
Circuit needed
How to make it with ac supply
Need 220v ac to 9/12 v converter
Lay ou pmese
How to principles work
Work nahi hote
Time delay and sensitivity sehi se set kijiye
@@easytechzones please how much can I buy everything
Mom
Don’t work
How do you know
Not working Fake contanat
Built it and it works for me. Maybe you have faulty components or you did it wrong. Works great in my room.
@@KennethNicholson1972 how did you do yours
Tx for posting this .is the buzzer activ or pasive?