You forgot to point out the pocket for the miller welder! everyone of them eventually winds up with one in there.or the air compressor... depending if your a construction guy or a tire guy...
I'm really liking this one. This may be the solution for maximum tool storage without the atrocious looks of a conventional utility bed. I'm assuming the space in the center is 4' wide for sheet materials?
I have one of these beds my only complaint is that it's only 4 years old and the powder coat job was absolutely terrible on it and a heads up this bed is 1790 pounds
We've found that powder coat back then was not so good. Most manufactures use a primer now. It's a very touchy process. Great bed though. Thanks for comment.
A couple of things they could improve: the chains in the rear compartments have already worn the paint, and that big door on the front looked like it had a lot of flex when he let the strut open it all the way. Nice looking bed, but it could be just a bit better.
Completely agree. The chains need a pliable plastic sleeve over them. There needs to be a couple of drains in the shovel compartment and Powdercoating you either over-do it or don’t do it at all. Better prep and 2 stage application would do it. But hey, it’s already too expensive but if they wanted to appeal to guys that drive long distances, make provisions for a 60 gal fuel cell.
I have one of these amazing bed and lots of compliments but powder coating job is horrible on mine bed also weight 1800lbs so beware otherwise I love it
I was looking but after 7300+ negative reviews on these type of steel beds I've decided to go with aluminum custom bed. The powder coat is a cheaper cut and the beds rust within 30 days of owning them. Do yourselves a favor get a aluminum bed. Look at this video you can see the rust in the beds that aren't even on trucks yet. Shows the poor quality.
What about my factory back up sensors and blindspot system that's in my factory tail lights?
One of the most custom fabricated body iv seen on market. Smoov az transition too. Real Powder coat too. 12-15k
You forgot to point out the pocket for the miller welder! everyone of them eventually winds up with one in there.or the air compressor... depending if your a construction guy or a tire guy...
Nice job with the video; good photography and explanation of features.
I'm really liking this one. This may be the solution for maximum tool storage without the atrocious looks of a conventional utility bed. I'm assuming the space in the center is 4' wide for sheet materials?
+jfdb59 Yes. Also a little storage under bed. See door just under tailgate.
Hello I liked your design of the trailer
You need shelving in the boxes
That's available. Thanks!
Would there be any way to set up a fifth wheel with this bed?
do the Norstar beds come with a resister built in to the tail lights?.
wow, my SD bed is so different than mine.
I have one of these beds my only complaint is that it's only 4 years old and the powder coat job was absolutely terrible on it and a heads up this bed is 1790 pounds
We've found that powder coat back then was not so good. Most manufactures use a primer now. It's a very touchy process. Great bed though. Thanks for comment.
Do they make one for a 1978 Ford F 350 dully
Do Norstar make a traxemen truck body for 2018 and 2019 Chevy Silverado 5500hd and 6500hd medium size truck ?
Very nice bed would look great on my truck, but the lock are shit in the northwest
can u do a video with single.wheel.shortbed
I’m looking to do this on a 2015 2500hd Denali.
Is it available? & possible to be color matched?
Give us a call 815-899-4340. Body shop would scuff and re-shoot.
A couple of things they could improve: the chains in the rear compartments have already worn the paint, and that big door on the front looked like it had a lot of flex when he let the strut open it all the way. Nice looking bed, but it could be just a bit better.
Completely agree. The chains need a pliable plastic sleeve over them. There needs to be a couple of drains in the shovel compartment and Powdercoating you either over-do it or don’t do it at all. Better prep and 2 stage application would do it. But hey, it’s already too expensive but if they wanted to appeal to guys that drive long distances, make provisions for a 60 gal fuel cell.
Electric locks and a key fob to control them. 😬
Does that center back light get in the way of you vision through the rear view mirror?
nope
WOW I M SOLD .... just need to cut a door for the fuel pump bwahahahahahahha
Is it the same bed for a single wheel and dually long beds ? And what's the price of that bed?
About $10,000 to $25,000.
I have one of these amazing bed and lots of compliments but powder coating job is horrible on mine bed also weight 1800lbs so beware otherwise I love it
Yeah, our experience with powdercoat hasn't been the best. A good paint is as good or better.
@@rondotrailer I had to have mine repainted I only wish this was wider
where are you located, installation costs on a 2015 Ram 5500 cab/chassis?
Paul David 1115 E. State st.Sycamore, IL 60178 Install is ~$800Thanks, Fred 815-899-4340
rondotrailer
What is the weight of this bed?
About 1200 lbs
@6:00
I want one but man oh man the price is up there. Do they make an all aluminum one?
No, just steel. The powdercoat is great though.
Aluminum would be 3 times this price i bet
@@thorseim7177 try canada lmao my car dissolved.
i want this bed! i dont see it on the cm site
This is a Norstar, check their site. www.Norstartruckbeds.com we sell them too.
This is my favorite utility bed.
Thanks for heads up. Fixed. @phuck ewe
How much and will it fit an international 4900
Yes we can get one to fit your truck. We need to know if it's an 60 or 78" CA (Back of cab to center of rear axle. Give us a call. 815-899-4340
Can is be put on a 3500 mega cab 2012
Yes, Norstar makes a bed that fits your truck exact.Give us a call and we can get it going for you.Thanks, Fred 815-899-4340
I was looking but after 7300+ negative reviews on these type of steel beds I've decided to go with aluminum custom bed. The powder coat is a cheaper cut and the beds rust within 30 days of owning them. Do yourselves a favor get a aluminum bed. Look at this video you can see the rust in the beds that aren't even on trucks yet. Shows the poor quality.
Is anyone making these beds with over a 30k limit?
Not yet, but the race is on. Soon like the pickups they will be at semi rating! 80K :)
Someone should help the narrator/videographer with the correct terminology for the components on this.
Correct terminology? Where was my grievous error? Also have a little grace, I'm not a news castor...or did I say that wrong? :)
I need one that fits on f150 1997
It would make it squat.
Do you still sell Norstar?
Yes
Yes I called and talked to Ed yesterday. Very nice guy. Wish you guys where closer!
How much is it?
nathan campbell About $6500. We can install or deliver too. Thanks.
You got for Toyota tundra
What is your frame outside to outside? What is your CA? (back of cab to center of rear axle)
Can you help me .
wE CAN ORDER ONE FOR YOU.
Unfortunately Aroed Fund is not complete.
l need the samll door at the rear end .
In fact I want to buy two .
How much cost ?
Nice but 2 much