Thank You so much. I just needed to know how to detach the red pin to make space to get the headlight dust cover back on, did the job in 10 minutes using this video. So kind of you to make the video and share the knowledge.
Thank you. It will be helpfull. If i need to remove left front wing, is it necessary to remove bumper or the removal of the headlight will be enough? Thanks for advice.
If the bottom bolt is heavily rusted, there is no way around but remove the bumper. I removed it partially. I did it a couple hours ago. I had to drill the rusted bolt out and will need to replace it with new when I gonna put the head light back. I also didn't like how the metal crossmember was bent up to get more space to remove the headlight. I wouldn't do it to my own car.
Sure man, you are right about bending the crossmember, but it's a 800 euro car... This bent crosssmember will be the last part to fail in this old van.
Is this the only option to change light bulbs on this lamp? Because there is something blocking the cap on the light on that side you are showing on video. So it seems like I cannot get to it without removing headlight.
You see, I came up with this method, because many screws, thats hold the bumper, were rusted and I couldn't get them out. And that metal bending... lol be real, it's a 1500EUR car.
I just done one 5 mins ago and I never removed the bumper or head light. it take 10 mins to change this bulb If you take out the screw and the bold holding the plastic panel to the left of the headlight . There’s plenty room To put your hand in take of bulb protection cap remove the bulb and replace it . Why make a little job into a big one.
Thank You so much. I just needed to know how to detach the red pin to make space to get the headlight dust cover back on, did the job in 10 minutes using this video. So kind of you to make the video and share the knowledge.
It helped me today! Thank you!
I returned only the two bolts. 😂
Exactly the video I needed to watch.
Thank you.
You’re welcome!
I’m attempting to replace a drivers side door& wing. This helped a bit. I’ll Probly drop the side of the bumper.
Thancks champ! You help me i appreciate
Thank you. It will be helpfull. If i need to remove left front wing, is it necessary to remove bumper or the removal of the headlight will be enough? Thanks for advice.
The bumper is attached to the wong, therefore you have to undo the screws there at least
Thanks bro, still helpful 💪
Excellent and useful information to get!! Well done!
Thank you, lot simpler than removal of bumper.
+David Webber thanks, I appreciate your feedback!
If the bottom bolt is heavily rusted, there is no way around but remove the bumper. I removed it partially. I did it a couple hours ago. I had to drill the rusted bolt out and will need to replace it with new when I gonna put the head light back. I also didn't like how the metal crossmember was bent up to get more space to remove the headlight. I wouldn't do it to my own car.
Sure man, you are right about bending the crossmember, but it's a 800 euro car... This bent crosssmember will be the last part to fail in this old van.
Any tips about bumper removal ? I have all screws taken out and still something holds the bumper. Seems like around headlights.
Very helpful video, thank you for sharing
You're welcome
Is this the only option to change light bulbs on this lamp? Because there is something blocking the cap on the light on that side you are showing on video. So it seems like I cannot get to it without removing headlight.
You can change the bulbs without removing the headlight
@@garagedilettante1128 How? Because on right side (left headlight) something is blocking access to the light bulb.
Have you tried it? There is enough space there to get the bulb in and out.
@@garagedilettante1128 Yes. I've tried and I cannot even open it to get to the bulb.
@@Filarel agreed, same here. There is plenty of firm cables blocking access
Thankyou shows it s posible to save time
You’re welcome
What size bolt is under the bumper? Same as the others?
As far as I remember - yes
Yes, saw it later, it was super rusty, big work to remove
Cheers for the video.........great help
+Andrew Brett thank you!
Is the procedure the same on 2015 Peugeot Partner?
Nikita Kaminskyy, 2015 is a different model, therefore I doubt that it would be same.
Helped us thanks.
+Gemma PearceDMM thanks for watching!
love the way he bends up the metal lol sooner lower one side of the bumper its not that hard .
You see, I came up with this method, because many screws, thats hold the bumper, were rusted and I couldn't get them out. And that metal bending... lol be real, it's a 1500EUR car.
Stupid design. A lot of the bolts holding my bumper on have seized. Thanks for the vid
Can't argue with that. I had same situation with bolts.
no need to remove whole bumper, five screws and you can bend the bumper and get to the third screw, much faster and easier than this method.
Great.
Thank you
Thanks for watching
I just done one 5 mins ago and I never removed the bumper or head light. it take 10 mins to change this bulb
If you take out the screw and the bold holding the plastic panel to the left of the headlight . There’s plenty room
To put your hand in take of bulb protection cap remove the bulb and replace it . Why make a little job into a big one.
I had to replace the headlight, not the lightbulb.
hi there can anyone tell me if them headlight have motor build in thank u
Yes the bulbs can be tilted be a motor inside
El que diseñó jamas cambio una lampara maldito
True
Useless
No, you are not useless. I’m sure there are people who needs you