That is a brilliant idea. This being my second time that I change it, and knowing how much work is involved to remove the whole dash, I was ready to cut the firewall open when I did one more RUclips search and found your video. I could not put it at the same place as you did because the harness wouldn’t reach. However, I cut it underneath the ductwork, and it worked extremely well. I was able to put four tiny screws in the corners and I used silicone instead of a two-way tape, which should hold it in place really well. Thank you for the genius idea. Cheers…
How’s it been holding up after a year and a half? My fan started working only intermittently and then after a few weeks it stopped for good. Gonna replace my blower motor and the resistor (just about the same price for both of them, rather than just the resistor… they’re crazy expensive) and I’m thinking of relocating it too because it’s a pain to get out of the back against the firewall.
@@Distriived which way did you come from to get to it? Were you able to reach under the glovebox and get to it? I'm not seeing how the harness is accessible but maybe I just need to keep pulling more stuff out
That is a brilliant idea. This being my second time that I change it, and knowing how much work is involved to remove the whole dash, I was ready to cut the firewall open when I did one more RUclips search and found your video. I could not put it at the same place as you did because the harness wouldn’t reach. However, I cut it underneath the ductwork, and it worked extremely well. I was able to put four tiny screws in the corners and I used silicone instead of a two-way tape, which should hold it in place really well. Thank you for the genius idea. Cheers…
Thank you so much !!! Problem solved !!!👍
I had to reach behind and unplug it by feel.
It doesnt need to go in the case. No need for hole. Could have secured it anywhere away from glove box
How did you get the harness out of the resistor?
Any one can help me please my 2011 ford 250 the ac doesn’t work at all any one had the same problem
How’s it been holding up after a year and a half? My fan started working only intermittently and then after a few weeks it stopped for good. Gonna replace my blower motor and the resistor (just about the same price for both of them, rather than just the resistor… they’re crazy expensive) and I’m thinking of relocating it too because it’s a pain to get out of the back against the firewall.
Doing just fine. I haven't had trouble with it.
What was your a/c doing/ not doing? Just trying to figure out if that’s what I need to do to mine
The fan quit. This module controls the fan. It was bad
How did u get harness out?
I got mine out by feel. Sucked too it took my like an hour to press the clip just right
@@Distriived which way did you come from to get to it? Were you able to reach under the glovebox and get to it? I'm not seeing how the harness is accessible but maybe I just need to keep pulling more stuff out