DSC Urgency Safety using ICOM M323 & ICOM M93D

Поделиться
HTML-код
  • Опубликовано: 25 окт 2024

Комментарии • 6

  • @SteelWolf13
    @SteelWolf13 7 лет назад

    how are you not transmitting the pan pan on a wide area VS your local room? With amateur radios there is a device called a dummy load and if you are close enough (a couple of inches) some times you can make out a transmission. Are you using a similar device to not cast wide?

    • @YachtCom
      @YachtCom  7 лет назад

      If you use a dummy load you are putting the full power into the dummy load. If there is a bad connection you will radiate a lot more than a couple of inches. The radios we use for training have had the power amplifiers disconnected so there is no chance of any stray radiation.

  • @byronmiddleton9943
    @byronmiddleton9943 6 лет назад

    can you do all ship calls on your m93d... I just bought one and cant find urgency... I found distress and other dsc (individual or group) which just asks me to fill in msi for the grp or individual... but also no all ships \ all stations menu

    • @andrewbanks5843
      @andrewbanks5843 3 года назад

      Did you ever figure this out, Byron? I have just purchased one and have the same issue.

    • @byronmiddleton9943
      @byronmiddleton9943 3 года назад

      @@andrewbanks5843 yup... in UK they are disabled... you need a dealer with a programmer to turn it back on. The place where i bought my radio from did mine. The logic I got from the dealer was... they were switched off in case I didnt want to broadcast my position

  • @patrickhouston829
    @patrickhouston829 3 года назад

    Very complex manual, and too many button inputs to achieve the basic requirements. Do not touch.