Hajimoto, thanks for the support as I am a very small player in all of this and hoping to contribute with the community !. In the future I'll try to make better content for everyone to see.
Omg , your range is fantastic...it is even fit for Olympic pistol shooting contest.Not only you live in a nice city but have such a range...I am yelow.
Hi Tudor, thanks for the view and subscription, my shoulder is ok, I'm back to work now. I recently saw that Nick Nielsen released a new slug that worked with the Huben good results at 100 and even 200 yards (check his website). I'm going to order a few to test them out and compare them in a next video.
@@alejandroo80 does NSA ship outside US? I guees not , as far as I know.I had my doubts about Huben K1 only because of the ammo fussyness / accuracy problem .Good luck ! By the way, I am myself geting into an adventure : I ordered the FX crown X barrel kit in .177 ...but for my Impact ( X barrel kit beeing unavailable for Impact).It seems that the barrel itself is a fit , only the shroud has to be remove or replace with any Impact barrel shrouds for .22 cal (500 mm barrel).🤔
Yes the barrels are all the same (as far as know and for what I've read) but if you want to change calibers you need to order the full barrel kit in a certain caliber, if you order a barrel liner in a different caliber you wont be able to insert it in!.
@@alejandroo80 No liners for sale yet in Europe, so just calibers swaps for now.I wont to order the Crown whole barrel kit in .177 to fit my Impact in .30 .Barrel will fit, except for the shroud but I can live with it : the big question is about the pelelt probe in the Crown kit....will it fit the Impact ?.....
Buen trabajo... por lo que logre ver ya estas operado, espero te recuperes pronto para seguir compartiendo tus experiencias. Note que compraste el compresor chino, yo estuve a punto de comprarlo.. vale la pena?. lo otro si quieres te puedo compartir mis ejemplares de MP Molds creo que andan un poco mejor que esos postones. los probe en Contulmo hace unas semanas a 90 metros y la dispersión no fue la que me gustaria pero mal no anduvieron. un saludo y que te mejores!!!
Hola, gracias por el comentario. El compresor chino me salió muy muy bueno, puesto en Chile me costó como 450 mil, lo he ocupado para llenar tanques scuba y los PCP super recomendable, tengo el link por si te interesa. Seria bueno lo de los MP molds asi los puedo probar y yo también te puedo enviar unos slugs de NSA para que los pruebes en tu Huben asi tenemos mas datos y experiencias. Estamos en contacto, enviame un mail o mensaje personal para coordinar mejor. Saludos y gracias
Alejandro, este fin de semana espero fabricar postones y podré enviarte unos ejemplares. En mi patio a 25 Mts con 290 m/s esta pegando poston sobre poston. Alejandro aprovecho de preguntarte.. cuanto te salieron los impuestos del compresor? lo enviaron por correos de Chile?
Hola Marcelo !!!, muchas gracias por tu generosa oferta de los postones, me gustaría tener tu email para tener un contacto más directo, si puedes envíame un mensaje privado a mi canal o publica tu dirección acá mismo. Acá te dejo el link directo al compresor que yo compré: www.aliexpress.com/item/4500PSI-300-Bar-220V-Electric-Micro-High-Pressure-PCP-Rifle-Air-Pump-Mini-Water-Cooling-Air/32791695477.html?spm=a2g0s.9042311.0.0.A4K9OR
Hi, thanks for your comment, there's a lot more to improve on the rifle/slug combo. Now there's a specific slug for the Huben, I have to get my hands on it and try it on my rifle.
Que bueno que pudimos compartir ese día, mira me puedes enviar un mensaje por PM acá mismo o en Face me envías un mensaje ahora y te contesto con mis datos, salgo como Alejandro Rene Ortiz Salas, espero el contacto
Excellent demonstration of what the Huben K1 can do with the proper ammo. Thank you for taking the time to share with the rest of us.
Hajimoto, thanks for the support as I am a very small player in all of this and hoping to contribute with the community !.
In the future I'll try to make better content for everyone to see.
And do ....what????
Feliz Pascuas --- Happy Christmas to you and yours. Thank you for all the excellent videos. Muchas gracias.
Omg , your range is fantastic...it is even fit for Olympic pistol shooting contest.Not only you live in a nice city but have such a range...I am yelow.
Sorry about your bone break! Started out a good day: nice scenery on the drive, nice range, nice video editing. Get well soon!
Thanks for all, now on my way to surgery !!!!
I hope your shoulder is ok.Great vid, maybe you should try to get the slug swagging kit Huben has for their rifle ....I saw it on one of Gregor' s vid
Hi Tudor, thanks for the view and subscription, my shoulder is ok, I'm back to work now.
I recently saw that Nick Nielsen released a new slug that worked with the Huben good results at 100 and even 200 yards (check his website). I'm going to order a few to test them out and compare them in a next video.
@@alejandroo80 does NSA ship outside US? I guees not , as far as I know.I had my doubts about Huben K1 only because of the ammo fussyness / accuracy problem .Good luck ! By the way, I am myself geting into an adventure : I ordered the FX crown X barrel kit in .177 ...but for my Impact ( X barrel kit beeing unavailable for Impact).It seems that the barrel itself is a fit , only the shroud has to be remove or replace with any Impact barrel shrouds for .22 cal (500 mm barrel).🤔
Yes the barrels are all the same (as far as know and for what I've read) but if you want to change calibers you need to order the full barrel kit in a certain caliber, if you order a barrel liner in a different caliber you wont be able to insert it in!.
@@alejandroo80 No liners for sale yet in Europe, so just calibers swaps for now.I wont to order the Crown whole barrel kit in .177 to fit my Impact in .30 .Barrel will fit, except for the shroud but I can live with it : the big question is about the pelelt probe in the Crown kit....will it fit the Impact ?.....
Thank you for your video. Hope you are recovering well.
Thank you very much for the good wishes!
Buen trabajo... por lo que logre ver ya estas operado, espero te recuperes pronto para seguir compartiendo tus experiencias. Note que compraste el compresor chino, yo estuve a punto de comprarlo.. vale la pena?. lo otro si quieres te puedo compartir mis ejemplares de MP Molds creo que andan un poco mejor que esos postones. los probe en Contulmo hace unas semanas a 90 metros y la dispersión no fue la que me gustaria pero mal no anduvieron. un saludo y que te mejores!!!
Hola, gracias por el comentario.
El compresor chino me salió muy muy bueno, puesto en Chile me costó como 450 mil, lo he ocupado para llenar tanques scuba y los PCP super recomendable, tengo el link por si te interesa.
Seria bueno lo de los MP molds asi los puedo probar y yo también te puedo enviar unos slugs de NSA para que los pruebes en tu Huben asi tenemos mas datos y experiencias.
Estamos en contacto, enviame un mail o mensaje personal para coordinar mejor.
Saludos y gracias
ctll sabía que conocía ese polígono! saludos
jajajajajaj así es, ese es mi club, me imagino que has ido a competir !!! nos vemos
Finalmente. Cuál es el mejor peso y munición para el huben?
Hasta el momento llas mejores alternativas (dependiendo de tu version) son JSB monster redesigned, Barracuda match y los postones de Huben.
Alejandro Ortiz Salas hola
Alejandro , si es la versión 2?
Y qué tal tu recuperación ? Como te fracturaste ?
I tried NSA 27.5 grain 218 on my HubenK1 2020. I found that slugs are a little bit loose in the magazine!
How could you manage to shoot NSA 217?
What kind of shooting sled/rest is that?
It's DIY one, made out of a carjack and solder the rest on it
Quiero saber si es posible que me los encargues ya que tu tienes el contacto, o como podemos comunicarnos?
Alejandro, este fin de semana espero fabricar postones y podré enviarte unos ejemplares. En mi patio a 25 Mts con 290 m/s esta pegando poston sobre poston. Alejandro aprovecho de preguntarte.. cuanto te salieron los impuestos del compresor? lo enviaron por correos de Chile?
Hola Marcelo !!!, muchas gracias por tu generosa oferta de los postones, me gustaría tener tu email para tener un contacto más directo, si puedes envíame un mensaje privado a mi canal o publica tu dirección acá mismo.
Acá te dejo el link directo al compresor que yo compré: www.aliexpress.com/item/4500PSI-300-Bar-220V-Electric-Micro-High-Pressure-PCP-Rifle-Air-Pump-Mini-Water-Cooling-Air/32791695477.html?spm=a2g0s.9042311.0.0.A4K9OR
Hola Alejandro buen video de los slugs, compadre quiero comunicarme contigo para que me guíes para comprar unos también y probarlos
Ningún problema compadre, dime que necesitas saver y en que te puedo hechar una mano!.
Very good video bur slugs is crap!
Hi, thanks for your comment, there's a lot more to improve on the rifle/slug combo. Now there's a specific slug for the Huben, I have to get my hands on it and try it on my rifle.
Compartimos el día de el evento de fx airguns y no pude conseguir tu telefono
Que bueno que pudimos compartir ese día, mira me puedes enviar un mensaje por PM acá mismo o en Face me envías un mensaje ahora y te contesto con mis datos, salgo como Alejandro Rene Ortiz Salas, espero el contacto
Them groups were shite for a 3.5 k £ gun