The North Pole (CNC Christmas Decor)
HTML-код
- Опубликовано: 8 сен 2024
- On this video will CNC engrave (Vcarve) a Christmas decor sign. This sign, which I'm calling The North Pole, was a graphic that was sent to me by a viewer. I usually don't do a lot of orders, however, this particular graphic stood out and really had that holiday season vibe. This project was done with a clearing toolpath using a 1/4" down cut endmill, followed by a a 1/2' 90 degree vbit. Airbrushing involved 3 colors making this project pop.
Iwata Revolution airbrush
amzn.to/3eR3Mth
Nema 34 Stepper motors
amzn.to/3osYXtd
Whiteside 90 degree V-bit
amzn.to/2BTIqL8
Whiteside 60 degree V-bit
amzn.to/33TrIpy
Mach 3 by Artsoft
amzn.to/3bAzj0q
3M Worktunes with Bluetooth
amzn.to/2S7EBK9
3m Safety glasses
amzn.to/3f3C5xm
Dust mask
amzn.to/2QCf6Ad
Camera quick release
amzn.to/2RDmNX8
Sony Handycam
amzn.to/3bH4Jm6
70" tripod
amzn.to/3wo9gSg
Yonico 1/4" end mill bit
amzn.to/3oA0DkC
1/8" end mill
amzn.to/3wo9t80
1/4" Ball Nose bit
amzn.to/3v7xX5a
1/8" Ball Nose Bit
amzn.to/3oDyWrs
60 inch ball screw (need 3 of these)
amzn.to/2RtWTVU
Pair of Linear rails 60 inch
amzn.to/2T5CTtj
3kw air cooled spindle
amzn.to/33THiBF
breakout board
amzn.to/2T0m3fg
z axis sliding table
amzn.to/3ylKe7T
Good luck with the move! Merry Christmas! Thank you for sharing, I pray that God blesses you today! Hugs and love to you and your family. 💖✝🤗 Have a beautiful and blessed week. God Bless 💖✝🤗
Excellent job. Merry Christmas to the McGill family from mine.
Thank you...and Merry Christmas to you and yours!!
That turned out awesome. Love the colors. Congratulations on selling and buying. Merry Christmas 🎅 🎄
I liked this one too!.....thank you I guess, I'm not enjoying the packing, and sure I will feel the same about unpacking..LOL.....You have a Merry Christmas as well!!...Thanks for watching!!
Lookin good Brain, love it!!🍒👍
You could paint that background white using a foam roller. Just roll in paint, then roll out some of the paint on a waste board and roll very "flatly" across the sign with almost no pressure. Works great, I never use Oramask
good job as always
Thank you, can' take all the credit of course, I'm not sure where the guy found this design, but it was a good one
I LOVE IT 🦌🌲🦌🌲🦌
Brian good luck with your move & all the best for Christmas and the coming New year thought the Christmas sign was awesome
Will u do a monthly progress video of your new shop build thanks 👍
Thank you, you have a Merry Christmas as well....I plan on doing several progress videos, and intend on putting out videos even while my operation is kind of halted...It will be a good chance to revisit the Laser CNC!!!...Thanks for watching!!
Brian, best wishes on your new house both you and Amy.. have wonderful Christmas and New Year.
You have a Merry Christmas as well!! Thank you and thanks for watching!!
Nice job Brian it turned out awesome. Keep up the good work and congrats on the new house.
Thank you....I'm ready to be done with the moving process already!!! Thanks for watching!!
Great job with the design! Good luck in your move and happy holidays!
Thank you and thanks for watching!!
Beautiful carve. Came out great on the Pine. No Fuzzies either!! Good wood choice! Hope you don't mind if I copy for smaller gifts (if my hand recovers from surgery in time) , love it!!
PS, good luck with the move & shop build. Hope it goes smoothly, don't overstretch your ticker!!
Copy away!!!....not looking forward to the actual move process, but ready to get going on the new shop!!....Thanks for watching!!
I noticed that you told someone that you seal before painting, sometimes. Is that based on the wood you use? Also, do you find that the spray paints bleed less than brush application? Thanks and as always, great work!
Love your channel do you design all your projects or down load. I would hate to tear that big rascal down and move it. Thanks you for sharing
This one was sent to me from a viewer....much of what I do are designs I have found...I often however make modifications to designs, sometimes small and sometimes large.. times I design the whole thing...Thanks for watching!!
What font are you using, I'm looking to do something similar for my grandchildren. Beautiful and clever -Mick
Well I don't remember off the top of my head, and I can't really go back and look, i lost some files when my last computer crashed, thanks for watching
That sighn is great. Where did you get the design from? Excited to see some laser videos that will be fun. I had a hard time learning a laser program, and after using vetric and coming back to the laser it made a lot more sense. Hope the shop build makes it into some videos too. Would love to see how it turned out. Thanks for all the videos
I loved this sign. (Where can I find a design like that?) Good luck on the move - it's a lot of work.
Brian this design and cut was beautiful! I'm new to woodworking so I'm still trying to figure out cut depths. What were the cut depths of the two bits you used? Thank you!
What type of airbrush paint are you using? I’m just starting to airbrush my signs. I have Createx transparent paint but it just doesn’t seem to cover that well. Or maybe I just need to layer it more.
Do you do all your own designing?
In a simple answer, No. This one was sent to me from a viewer....much of what I do are designs I have found...I often however make modifications to designs, sometimes small and sometimes large....Thanks for watching!!
Great job as always Brian. You seal the wood any before painting to make it easier when sanding?
Sometimes I seal, I didn't on this one....Thanks for watching!!
Hey Brian, what air pressure are you using with your air brush? Merry Christmas
Let me check, I have a good guess, but I'd rather be sure...shoot me a email at smokeyscnc@gmail.com and I'll find you the answer...Thanks for watching!!