TOTAL LOSS OF POWER - Mobility Scooter Fault Finding - Always the SIMPLE stuff!
HTML-код
- Опубликовано: 17 июл 2021
- In today's video we're fixing a Pride Colt Deluxe mobility scooter. The customer reported that it suddenly stopped working and we were therefore called out to sort the scooter out.
We noticed there was oxidization on the main dashboard panel which had me suspicious of what the fault was, turns out we were right and were able to get the scooter working again.
We didn't have a replacement part to sort this scooter out but came up with a solution that allowed this customer to use their scooter again.
Like and subscribe if you like watching my videos!
Thanks for the mention and for looking after one of my customers. Very professional video, great quality
Anytime mate , happy to help 🤗
Thanks for the informative video! Went to the key switch first and that was the problem!
Used a key switch for a Ford tractor which I got from the local feed store. It was a perfect fit.
This is a brilliant video - thank you so much! I've been looking for a video to see how to get to the key barrel to check for continuity. So seeing you access it from below is very helpful!
Thank you 🙏
I did check the barrel but mine is okay. I heard you mention the wiring... Do the connectors disconnect on these? Any connector in particular? The battery packs have power going into the tower unit as checked with a multimeter. So just wondering where to check next... I haven't taken the floor pan up yet as was hoping it may be something simple. Just no battery / power light display and nothing is working so I just hope it's not the controller 😢
🤣🤣🤣🤣🤣
I I found an identical key switch replacement for my Active Care Prowler 3410 at my local Jay Car Electronics store at Botany Road Alexandria. It was Cheaper than the genuine replacement part. I walker into the store and there it was hanging on a hook for $15 AD
I love ❤️ your videos
Dang good diagnosis and repair. How exactly did you bypass the key switch and did you make that button mod yourself or buy it?
Nice route of elimination process! I've gone through everything that I can think of to try and fix a Solax Genie but its still not moving. Its has an 8 beep error code after pulling accelerator which for this ecu says ' Motor voltage fault, so I've checked the cables to the motor which are fine after battery testing the motor and checking resistance and has secure connection to the ecu. Could this error come up if the ecu was faulty and just not putting out any power to the motor? I just don't want to fork out for a new ecu just for the sake of elimination. Hope you can help, thanks
I'm in California and wish you were near by. I have had my scooter for a long time, but have used it once or twice a year, maybe a total of 15 times. I need to start using it more. I bought a new battery and charged it. Suddenly, the scooter turns on fine when i plug it in, but doesn't work on battery. I've tried sever easy things after watching yt videos. Fuse is good. It beeps 10 quick times when power is turned on. Thoughts?
I have a electric cabin scooter twist and go all power is working batteries are full but no power going in to drive or reverse.any advice could be motor problem or wired issue .
Is there a speedometer that can be fitted to any mobility scooter? I have a quingo plus, and they don't do them.
Hi, great little video. I have a pride Celebrity can you tell me if the Anderson connectors on the front to rear harness are 30amp connectors please.
Hi. I would say they would hold 30 amps and may be rated to 50 amps even. If you are replacing them then I would advise going for the 50 rating just to be safe. These scooters have decent weight limits and can handle decent size hills too so I’d be surprised if it’s rated any lower than 30amp.
What colours to use to wire it to bypass key barrel as mines won't move any help
Total power loss? My first check: fuses. Nex: check batteries at all locations. Last: chase voltage through wires, continuity test on ignition switch, or resistance.
Hi I have a sterling little gem mobility scooter 4 wheels and I have changed the battery up and the scooter keep cutting off and going into low power ( would this be a battery problem
My mum's got the same scooter, when she rides the power light goes to red when you let go it climbs back up to green. Is this a battery issue. So all lights green but when you ride it they drop to red. Is there to much power being pulled from batteries? Any help would be amazing
I love cowboys, Clint Eastwood is my favourite.
Not good to keep scooters outside. Doesn't help the battery. Outside kills them quickly due to the cold.
I’m looking for someone to fix my scooter just out of hospital and can’t get out can’t walk far need it
I have a breeze midi old version and when I turn it off at key the back lights stay on only red ones not reversing ones ? I’m trying to get tiller open to make sure nothing Is loose or wet but all screws are out and it won’t budge ?
Check the mirrors aren’t retaining the dash if it’s coming off from the top. I’d assume top dash needs to come off before pulling main front cover off.
I think there’s a separate control board located in the dash / front section that manages lights , etc
Failing that try disconnecting the lights switch on the dash to see if it resolves , if this turns out to be the issue just a case of replacing switch
May i ask what the charge would be for this
How did you bypass the key?
hello i got problem wiyj my scooter its not powering on the scooter called eden roadmaster plus im in uk it was working perfectly fine but for no reason its gas stoped i cant even get started nothing no power anywhere no display showwing nothing what you thing what the problem its theter please
Hi Mark pride soocther not working dnt come on in Oswestry Shropshire sy 11 2rd
I have a pride 9 scooter and I only get one light on the voltage meter could it be the key switch
Can you help me to be able to get it going again
Can you tell me, I have celerity deluxe scooter only one speed, the x sport has two speeds, there are spare wires in the dash, would I be correct to say they are for the missing speed switch, that the x sport has?????
Possibly , how many wires are there and what colour ? Usually a pair of white wires for the 4mph/8mph switch
black-brown-pink and red with black strip.@@themobilityguy
@@themobilityguy the scooter in this video has three switches, the speed switch wiring is what im looking for if you can help
Can I use a 36v battery on a sterling s425 24v scooter?
You should only use 24v on a 24v scooter, nothing more than that as you’ll run into issues with the controller plus a whole lot more hassle on top. Keep to the original voltage , you can however increase the size of the batteries if there’s space to do it, as long as they stay 12v each
I need help i just got one no power
Why move battery
I wanted to see how it disassembling
You have a speed limitation and can it be removed and how?
I have power but scooter does not move and battery is fully charged.
Is there any lights on the dash flashing? Have you checked the scooter isn’t in “neutral” (the brake at the back of the scooter )
I have ew52 scooter battery show fullchager but will not mover the dash is fullinglite
Yes all light are on
May the charge lite is green but will not a charge
Dont show how to go about doing just does not help at all
Plenty of videos on RUclips 👍🤪