I have 2 XM316 blaster’s I call the twins one black and one tan and they are just nylon gearbox’s that I put together and they are sitting at 330/340fps and have done for over a year now
Nylon gearbox are much nices for durability. My friends loved nylon gearbox bcs it is quite affordable. They had bad experience for metal gearbox, it didnt last longer on m140spring. Idk why
Could you pls pls make a video of the inside of the gearbox because I really want to get an idea of what I'm going to be working with and also the trigger design so I can buy a metal one.
1: I reckon that V3 gearbox is maybe out of an STS AK? Maybe? I dunno. That's my guess on the box. 2: Those nylon gears deserve a little glass display box and should head straight to the pool room. 3: I watched a 9 and a half minute ad for Barilla pasta, based on the supposed original creation of the Carbonara recipe in the middle of this video. You'd better fucking believe I want me some carbonara right now!
I would put money on the metal gearbox having a 6mm nozzle and the nylon probably has a 8mm nozzle, anything with a 6mm nozzle and that's most v2's is harder to get power out of it, but with a 8mm nozzle it's much easier to produce more fps ,kinda like when you blow through two different diameter straws the the thinner one can't flow as much as the thicker one
I have been running a cut down m140 in my vector for 2 years now,I run a 30cm barrel with a teardrop 80% port..and still have original re-shimmed plastic gears...avg fps 380
@@KamranRulez2020lots of patience and time my friend! I'm building a gel blaster right now with 13.1 gears a high torque brushless motor and lemme tell you it's a lonnggg process to getting everything right so it will last longer than a week lol
Yo I miraculously ran into this video because I just bought that gearbox, I believe it's the J12 AK gearbox because I'm building the worlds first mg-34 full metal gel Blaster and now I have better hopes for this gearbox. thx for making the video.
It works pretty nice, if I get some actually nice plastic gears, I will use it till it break, and they last very long, heck sometimes the gearbox breaks first due to strong spring, they are no joke when shimmed properly
You shouldn't test it out of the receiver as the box can flex and the piston can come off the rails and cause the walls on the box to stay bent out of shape.
Correct. > Spring = more fps > 11.1v battery = higher rounds per minute. > High speed motor = higher rounds per minute. > Upgraded o-rings = less chance of leaks = better chance of consistent higher fps > Metal gears = long life. I'd start with just upgrading the spring. Do the rest later when/if you need it. On an low cost blaster, upto M120 should be fine. One high quality blasters, M130 should be fine and M140 will work but something will break eventually
Loguido, can you do a video showing how to remove the stock tube of a CYMA SR-16E3 and how to put a new buttstock tube on it? I have tried to mount new buttstock on the existing tube none will fit the existing tube so I need to replace the buttstock tube
My all metal M4 ( M4 undertaker at GBU) shoot 380fps, all metal gears, V2 12;1 gear ration, 10in handrail , simple looking, wanted power accuracy (a sleeper) 110m spring , razor hope up etc,). BUT THE GEL BALLS ARE 80% exploding. Aka, beast gel balls when firing……… when it works 35m dead straight hard hitting, but what’s the point when most explode !!!!! why is this happening please and what can I do to fix it. I’m happy to pay to send to you to make a video {lol}…………… help snd advise!!!! Warm regards stay safe and healthy 👍🏼👍🏼🇦🇺🇦🇺
Have you resolve the problem yet? Cause from my experience you just need to check out for barrel porting, cause machine porting sometime leave some kind of sharp edge, always sand it with 3000 sand paper to smooth it out, other wise this will happen..i mean like alot
Noob here, planning to get a Cyma M4 cqb. Besides getting an 11.4v, what others things do you guys recommend to upgrade using the stock nylon gear to increase the FPS?
Change plunger with metal teeth,plungerhead + new oring,get better airseal,pistonhead double o ring+ nozzle,also create better airseal not 100% but better from stock,using spring m95 minimum,or m120 (for short terms using nylongearbox) ,gearset 18:1 mybe 13:1 for good trigger respond,using full cylinder not ported cylinder yeah of couse using high torque motor too!! Then you will have increase fps not accuracy 😌
@@stevepatterson6297 looks like a v3 gearbox for j12 but earlier version by looking at the blowback position is on the side and the newer versions moves the blowback tab to the top of the gbox and the mag contacts are no longer using springs like we see in the video.
A standard motor, ussually cannot pull a SHS M140 Spring when it has already been compressed. For a M130, some bullshit standard motor can, some cannot. That's a bit insight for you guys before put any spring into your toy.
the problem with using nylon gears and big springs happens when you go from using a big spring i.e: m140, and drop back down spring strength, to like a m120 for example, coz thats when the forces onthe the gears changes and creates the weak point.
O the issues with current load on high rate springs if current covid-19 cases on parts like the M160 motor that due to the wrong thread count cracked a locking pin and gave short issue Till I stuck a motor screw in the neg on top and smoked it out.or the German spring that sticks to the back metal plug not on the spring release current 1.4 sweet like while I fix the M160 motor 🤕🧐😡 car battery??????180 or super cool it 160 will run a 480 spring??for bat FN crazy 🤣how to distroy every gearbox.
Love the callipers bro hope your getting great use from them
Was it you who gave them to me? I was gonna give you a shout out But I forgot who it was!
@@lowguidoschopshop all good bro. Great to see there in good use. I use mine heaps with 3d printing design all the time.
@@lowguidoschopshop stuffed my back so no more running around the gelball field for me any more.
@@lowguidoschopshop 😂
Whats gearbox j8 ?
I have 2 XM316 blaster’s I call the twins one black and one tan and they are just nylon gearbox’s that I put together and they are sitting at 330/340fps and have done for over a year now
Many folks will be saving lots of money thanks to this video. Love your work Low Guido!
i always said nylon gears were under rated and this proves my point. you DONT NEED METAL
Everyone loves a tight box.
Thank you for making this video! Now at least we now have an idea which to choose and whats not.
Nylon gearbox are much nices for durability. My friends loved nylon gearbox bcs it is quite affordable. They had bad experience for metal gearbox, it didnt last longer on m140spring. Idk why
Could you pls pls make a video of the inside of the gearbox because I really want to get an idea of what I'm going to be working with and also the trigger design so I can buy a metal one.
1: I reckon that V3 gearbox is maybe out of an STS AK? Maybe? I dunno. That's my guess on the box.
2: Those nylon gears deserve a little glass display box and should head straight to the pool room.
3: I watched a 9 and a half minute ad for Barilla pasta, based on the supposed original creation of the Carbonara recipe in the middle of this video. You'd better fucking believe I want me some carbonara right now!
I am rocking a 110 spring in a nylon gearbox, it out performs my 130 in a metal gearbox, but both have an 11.4 volt battery with metal gears.
I would put money on the metal gearbox having a 6mm nozzle and the nylon probably has a 8mm nozzle, anything with a 6mm nozzle and that's most v2's is harder to get power out of it, but with a 8mm nozzle it's much easier to produce more fps ,kinda like when you blow through two different diameter straws the the thinner one can't flow as much as the thicker one
How is it this 2024,is it still okay? Or did you upgrade to 120
Still unchanged. 👍🏽
I have been running a cut down m140 in my vector for 2 years now,I run a 30cm barrel with a teardrop 80% port..and still have original re-shimmed plastic gears...avg fps 380
shii im going to learn to mod one day if thats possible 🗣🔥🔥
@@KamranRulez2020lots of patience and time my friend! I'm building a gel blaster right now with 13.1 gears a high torque brushless motor and lemme tell you it's a lonnggg process to getting everything right so it will last longer than a week lol
Yo I miraculously ran into this video because I just bought that gearbox, I believe it's the J12 AK gearbox because I'm building the worlds first mg-34 full metal gel Blaster and now I have better hopes for this gearbox. thx for making the video.
It works pretty nice, if I get some actually nice plastic gears, I will use it till it break, and they last very long, heck sometimes the gearbox breaks first due to strong spring, they are no joke when shimmed properly
Is nylon cyma good?
You shouldn't test it out of the receiver as the box can flex and the piston can come off the rails and cause the walls on the box to stay bent out of shape.
Should have shown the fps difference in all those
AMAZING TEST BRO !!!
where dose the safety thing go to stop trigger pull when on safe?
Safety is for chumps
Safety doesnt work on a gen 8, what gearbox u using
I'm newer to this kind of stuff and got a emerbu toys arp9 it has an 8.2 metal gear box what spring upgrade would you recommend?
M100 there isn't any need to go bigger than that. I only do it the break stuff on pourpose.
@@lowguidoschopshop do you happen to know what spring is in it already and if it's even worth upgrading
@@lowguidoschopshop and would it be better to go for a m125 since I have metal gears
Hi! Newbie here...so I'll just replace the spring to increase FPS? Any other upgrade to consider?
Correct.
> Spring = more fps
> 11.1v battery = higher rounds per minute.
> High speed motor = higher rounds per minute.
> Upgraded o-rings = less chance of leaks = better chance of consistent higher fps
> Metal gears = long life.
I'd start with just upgrading the spring. Do the rest later when/if you need it.
On an low cost blaster, upto M120 should be fine. One high quality blasters, M130 should be fine and M140 will work but something will break eventually
What blaster does this gearbox live in
most likely a gen 8 m4
@@mrdewbis cyma nylon m4 durable? I'm broke and cant afford metal
Does this gearbox came from weidi pdx?
Awesome video mate.
Whats the gearbox brand ?
Will you show all the parts list ?
How many springs do you use, and how long is the barrel?
Loguido, can you do a video showing how to remove the stock tube of a CYMA SR-16E3 and how to put a new buttstock tube on it? I have tried to mount new buttstock on the existing tube none will fit the existing tube so I need to replace the buttstock tube
How is that motor keep running lol.
What gel blaster AR would you recommend for somone looking to get into custom builds?
Can u do a full video for Tar-21 stripping it off completely? I never seen anyone doing it so far. Want to know how for this blaster
what gearbox is this? is it a gen 8?
My all metal M4 ( M4 undertaker at GBU) shoot 380fps, all metal gears, V2 12;1 gear ration, 10in handrail , simple looking, wanted power accuracy (a sleeper) 110m spring , razor hope up etc,). BUT THE GEL BALLS ARE 80% exploding. Aka, beast gel balls when firing……… when it works 35m dead straight hard hitting, but what’s the point when most explode !!!!! why is this happening please and what can I do to fix it. I’m happy to pay to send to you to make a video {lol}…………… help snd advise!!!!
Warm regards stay safe and healthy 👍🏼👍🏼🇦🇺🇦🇺
Have you resolve the problem yet? Cause from my experience you just need to check out for barrel porting, cause machine porting sometime leave some kind of sharp edge, always sand it with 3000 sand paper to smooth it out, other wise this will happen..i mean like alot
Check mag if hava anykind spiky or hard surface area then check t piece,also check nozzle rubber,then go to inner barrel 😎💪
@@PisangzChannel thankyou
What spring do you recommend for a scar v2 with gearbox generation 8 and more or less how many fps it gives
and how can i request it
these nylon gears are not failing NNN
So what spring is the default spring manufacturers use?
M80 -M90
...only at Low Guido’s Chop Shop, but holy molybdenum it ain’t...but damn if it was...the gears that is. Nice one Bruh
That's Pretty Cool
Hey low guido would it be fine to use a 1.28 unequal spring on nylon gears
high chance they would break. you may get lucky (like this video) but I wouldn't do it. (at least not for anything I wanted to last long term)
@@lowguidoschopshop thanks
How much does that build cost?
Whats the box out of?
Hi! So I bought a new spring however it''s kinda longer . Should I cut it to level with the stock spring length?
Bout to buy a gel blaster m4 and put a DSG gearset upgrade spring and 6mm feel nozzle and hopup
How can I get it ?
bro can you review the Well M4 MRT Metal gel blaster please !?
What fps would you get from a m95 stage 1 upgraded spring including o ring and new barrel
310fps
@@lowguidoschopshop will a 7.4v push the m95?
stock box goes brrrr
Can u build my blaster ill send it to you and pay u of course
wow thats amazing
Sucks being in south australia
Noob here, planning to get a Cyma M4 cqb. Besides getting an 11.4v, what others things do you guys recommend to upgrade using the stock nylon gear to increase the FPS?
Change plunger with metal teeth,plungerhead + new oring,get better airseal,pistonhead double o ring+ nozzle,also create better airseal not 100% but better from stock,using spring m95 minimum,or m120 (for short terms using nylongearbox) ,gearset 18:1 mybe 13:1 for good trigger respond,using full cylinder not ported cylinder yeah of couse using high torque motor too!! Then you will have increase fps not accuracy 😌
@@PisangzChannelhow about accuracy?
NICE
may i know what did u upgrade in on ur blaster?
That is awesome I love the gen8 I but I gave mine away I would like a gearbox you make as you are the best at gen 8 and any thing you Touch really
Is that a v3 or a gen 8?
@@johnh3733 I am pretty sure it is a gen 8 but don't Quote me on that I could be wrong as there have been A few different types of Gen.8 gearboxes
@@johnh3733 That I am pretty sure the V3 has a separate Tee peace
I don't think that's a Gen 8.. Guido? Shed some light?
@@stevepatterson6297 looks like a v3 gearbox for j12 but earlier version by looking at the blowback position is on the side and the newer versions moves the blowback tab to the top of the gbox and the mag contacts are no longer using springs like we see in the video.
What FPS you think thatould be pushing with the M140 and M150
1 day ago?
In a perfectly sealed box probably 380-420.
@@mdag1383 this man has broken time
@@mdag1383 patreons/coffee members/friends get the unlisted link first.
just go directly to airsoft
Illegal.
@@lowguidoschopshop
boom.
Nice
A standard motor, ussually cannot pull a SHS M140 Spring when it has already been compressed. For a M130, some bullshit standard motor can, some cannot. That's a bit insight for you guys before put any spring into your toy.
It’ll survive the m100 but the m140 will kill it I bet
@@taylorgrunden3174 what if it gets too hot... won't they melt?
the problem with using nylon gears and big springs happens when you go from using a big spring i.e: m140, and drop back down spring strength, to like a m120 for example, coz thats when the forces onthe the gears changes and creates the weak point.
I find the problem is generally when they get too hot and just melt.
⁸
i think m100 will broke that gearbox.
M120
O the issues with current load on high rate springs if current covid-19 cases on parts like the M160 motor that due to the wrong thread count cracked a locking pin and gave short issue Till I stuck a motor screw in the neg on top and smoked it out.or the German spring that sticks to the back metal plug not on the spring release current 1.4 sweet like while I fix the M160 motor 🤕🧐😡 car battery??????180 or super cool it 160 will run a 480 spring??for bat FN crazy 🤣how to distroy every gearbox.
HELL BLASTER????