This is awesome. The FishPro Trophy AUS/NZ 2022 model didn't include a swivel seat, so I will definitely be installing it myself, thanks to this great video!
I really wanted the backrest myself but I couldn't justify the extra $720.00 plus to get everything needed for the backrest. I suppose a guy could take the existing seat into an upholster shop and get them to customize the seat to allow for the two holes that are needed. The extra parts to accommodate the backrest are not too spendy.
Awesome video and great job, thanks for sharing this valuable info brother! I have the 2020 Fish Pro which of course was before this seat came out, one question, I have the Sea Doo factory auxiliary battery mounted to underside and wondering if it will still fit with this new setup? Thanks!!! Liked and subscribed also!
Glad you enjoyed the video and thanks for liking and subscribing! I am not familiar with the setup for the 2020 Fish Pro so I did a little digging around on Green Hulk PWC and it shows the Access Cover Assembly having the setup for the swivel seat. (2020 GTX Fish Pro) is what I am looking at but since yours doesn't have the seat set up, I am not exactly sure if it would work. However I don't see any reason why it wouldnt work as you will need to buy a new Access Cover Assembly and you should be able to remove the mount from your existing cover and attach it to the new one. Sounds like you might need a few more parts and pieces as well. If you have not already, check out my parts list and install video and that should help you out a bit more. It should also show you what the underside of the access cover looks like and you can look at yours and see if they are similar or not. Hope that helps.
www.4-tecperformance.com/ This is where I bought the parts I needed to do the conversion. This allows you to make it as close to factory as possible. I have seen some after market swivel seats but I would recommend you do this conversion instead of an after market add on.
Hi Brandon, It looks like Seadoo introduced the ST3 Hull in 2018 for the GTX lineup. I don't believe they have changed anything since then so I would believe that this will work for your 2018. Take a look at my comment to Jon and measure the screw holes on the bottom of your seat to verify that the bracket will line up. If it does, you should be good to go.
I am gathering all of my parts and the only thing I’m confused about is part #293200124 Seal. I watched your video several times and never see this part on the video but it is on your list, is this not needed?
Sorry for all the responses but it turns out that part #293200124 has been changed to part #219704366 which is the Seat (Water) Seal for the 2022 GTX Limited 300. You don't need this part as your seat will already have the seal for your machine.
Just finished putting mine all together! Looks awesome! Thanks again Scott!!!
This is awesome. The FishPro Trophy AUS/NZ 2022 model didn't include a swivel seat, so I will definitely be installing it myself, thanks to this great video!
Yes, thank you! the decision between the 300 gtx or the fish pro was a tough one because of this feature, best of both worlds 👍👍
Just the video I was looking for. Thanks for putting this together.
Very gracious of you to share. Thank you for excellently including the part numbers. Great demonstrations as well. Happy Skiing !!
Awesome video Scott, thank you for sharing, my new GTX is arriving in May and I already ordered the parts for the swivel seat !
Glad to hear it man, you are going to love it!
Excellent video! Thanks!
Thanks brother for taking the guess work out of it.
No problem, I find a lot of good info on here that has helped me over the years and just trying to help other people out myself.
im about to make this mod to my fish pro scout 130
I just finished doing my 2020 Fish Pro a couple hours ago, it looks awesome now! Can’t wait to try it out!
Great video! Appreciate all the details man. Great job!
Thank you!
Nice work, I got my sea doo fishpro sports, but like to have the swivel seat in it with the backrest.
I really wanted the backrest myself but I couldn't justify the extra $720.00 plus to get everything needed for the backrest. I suppose a guy could take the existing seat into an upholster shop and get them to customize the seat to allow for the two holes that are needed. The extra parts to accommodate the backrest are not too spendy.
Awesome video and great job, thanks for sharing this valuable info brother! I have the 2020 Fish Pro which of course was before this seat came out, one question, I have the Sea Doo factory auxiliary battery mounted to underside and wondering if it will still fit with this new setup? Thanks!!! Liked and subscribed also!
Glad you enjoyed the video and thanks for liking and subscribing! I am not familiar with the setup for the 2020 Fish Pro so I did a little digging around on Green Hulk PWC and it shows the Access Cover Assembly having the setup for the swivel seat. (2020 GTX Fish Pro) is what I am looking at but since yours doesn't have the seat set up, I am not exactly sure if it would work. However I don't see any reason why it wouldnt work as you will need to buy a new Access Cover Assembly and you should be able to remove the mount from your existing cover and attach it to the new one. Sounds like you might need a few more parts and pieces as well. If you have not already, check out my parts list and install video and that should help you out a bit more. It should also show you what the underside of the access cover looks like and you can look at yours and see if they are similar or not. Hope that helps.
how much was it for all the parts? I have a new seadoo explorer pro and thinking of adding the swivel seat. great video!
It was $600.00 about a year ago. prices appear to have increased a bit since then.
Can you list a full parts list. Thanks
Check out the comments in this video. It has all the parts listed. ruclips.net/video/-H_-gOwDloE/видео.html
Hi if this works for the gtx 230 please send me the parts list and numbers and where I can get the kit
Where can you buy the Sea-Doo Aftermarket Swivel seat?
www.4-tecperformance.com/ This is where I bought the parts I needed to do the conversion. This allows you to make it as close to factory as possible. I have seen some after market swivel seats but I would recommend you do this conversion instead of an after market add on.
Will this work on my 2018 GTX 300 limited?
Hi Brandon, It looks like Seadoo introduced the ST3 Hull in 2018 for the GTX lineup. I don't believe they have changed anything since then so I would believe that this will work for your 2018. Take a look at my comment to Jon and measure the screw holes on the bottom of your seat to verify that the bracket will line up. If it does, you should be good to go.
I am gathering all of my parts and the only thing I’m confused about is part #293200124 Seal. I watched your video several times and never see this part on the video but it is on your list, is this not needed?
I looked into it and I can't locate that part number you have referenced anywhere. Not sure where I came up with it but will keep looking into it.
Thanks for bringing this to my attention! I also went ahead and rearranged the parts list in order to match the video so its easier to follow.
Sorry for all the responses but it turns out that part #293200124 has been changed to part #219704366 which is the Seat (Water) Seal for the 2022 GTX Limited 300. You don't need this part as your seat will already have the seal for your machine.
@@astfwp Thank you for your quick response.