Это видео недоступно.
Сожалеем об этом.
Filter Drier installation on a 2012 Honda Civic LX Coupe
HTML-код
- Опубликовано: 12 сен 2021
- Desiccant filter (Filter Drier) replacement for the DIY Person. Watch the whole video for bumper removal an special tips. Installation of the new filter is at 7min an 40 secs if you already have your bumper removed an have followed the steps for your safety.
Thank you for taking the time to post. Good info. Replacing one on our 2010 CRV ... similar. Thanks again!
A small tripod/selfie stick from walmart would be great for these vids. Thank you for posting.
You can use the head of a metric bolt to insert into the plug, and pliers on the threaded end of the bolt to loosen the plastic plug. No need for that specialized tool.
You just saved my afternoon. Had to dig around for a 14mm bolt but it worked.
Thanks for doing this. I just replaced my compressor and I might as well do all this too
Right on, bubba. I'll watch this one after work. Thanks. I'm interested in seeing how simple/difficult it is to work on these newer Hondas.
Thanks for the support. Because of you I got this video up an going. Thanks my man.
Always put refrigerant oil on the white Retention Cap Oring - or you'll be sorry. The seal could micro tear or bunch up, then leak. Also, I would grind away a small semi circle of that sheet metal so the cap can easily be removed and reinstalled.
My bad I did that part off camera. You'll see on clip 14:01 it's got the pag oil on it. Thanks for mentioning that. Because someone would just put it in with no lubricant.....
I struggled pulling the old desiccant tube (dryer) from the evaporator. I’m buying a pair of SKINNY needle nose pliers to try in the morning.
That should do it. It'll give you the tweezer effect. My best wishes to you
Thanks very detail.
Have video for toyota estima ACR 50?