And we are happy for you. Now get to it, download the build instructions and start building the mission models. Let us know if you have any questions. We also are on IG and Twitter, in case you want to discuss any details. ⚙️⚙️
Hello Venkatesh. The instructions for the EV3 Educator driving base can be found here: education.lego.com/en-us/product-resources/mindstorms-ev3/downloads/building-instructions And the instructions for the Spike Prime advanced driving base can be found either within the Spike Prime software or here: education.lego.com/en-us/product-resources/spike-prime/downloads/building-instructions Contact us through IG if you need more help. ⚙️⚙️
Hello Eswar. All of our attachments were designed by us. The first attachment for collecting the water units is just built onto the yellow brick in the front right corner of the SP and just has to be the right height to pick up the looped water units. We added more “teeth” to the “comb” to have alternate hooks in case the robot is going slightly off the path. The base for the second attachment is the same base as for the single arm or dozer blade attachments in the tools instructions for the SP advanced driving base. From there we just added the arms to get us the height we needed and decided to carry the two units horizontally to hook them. We added a pivot to the “holder” to make sure the two hooked water units would release from the axle pins as the arm swings down. Let us know if you need more info and we can share more details through IG. ⚙️⚙️
@@legoblade5148 there are no instructions. We built these onto the SP step by step while trying to solve the mission. If the written instructions in our reply above are not clear, maybe there is an easier way you can build it. As always, our videos are for your inspiration. We are not in the business of selling ready made solutions. Let us know if you have a specific problem that you need help with. ⚙️⚙️
Yes, our EV3 is using the gyro sensor for turning We usually use MyBlocks for both, turning and moving straight with the gyro sensor, but this season something was off with the driving straight one, so we did not use it for any of the videos. Our SP is relying on the yaw angle sensor for both though. ⚙️⚙️
Hello. If you are looking for the build instructions for the mission models for the „SUPERPOWERED“ season, you can go to: www.firstlegoleague.org/past-challenges?__hstc=212927755.e5446403064ab57163a9d3eabc9960a6.1715128962373.1715128962373.1715128962373.1&__hssc=212927755.1.1715128962373&__hsfp=2079238408 Let us know if you were looking for something different. ⚙️⚙️
@@6006TechWarriors We already managed to build Spike's but we can't with the others. I need the instructions for the rest, for example, the windmill and the other white, orange, and blue missions.
@@adaluzsolarcruz7818 Please see the link we provided in our initial reply to you. There you will find the build instructions for all the SUPERPOWERED mission models. ⚙⚙
As with all our videos for this season, this is just an inspiration as to how this particular mission could be solved. In an actual match we assume that one would combine the collecting of the looped water units with different missions before and the delivery to the hooks and pond with other missions after. ⚙️⚙️
@@6006TechWarriors i was thinking the same thing and also thanks for helping us thi is my first time competing in fll and its the same for my whole we really needed some help and you offered it
GUESS WHAT I FINALLY GOT THE MAP THING I’m so happy
And we are happy for you. Now get to it, download the build instructions and start building the mission models. Let us know if you have any questions. We also are on IG and Twitter, in case you want to discuss any details.
⚙️⚙️
@@6006TechWarriors donde puedo encontrar las instrucciones de construcción?
WOW
This is really cool. Where can we find instructions for building your base model?
Hello Venkatesh. The instructions for the EV3 Educator driving base can be found here:
education.lego.com/en-us/product-resources/mindstorms-ev3/downloads/building-instructions
And the instructions for the Spike Prime advanced driving base can be found either within the Spike Prime software or here:
education.lego.com/en-us/product-resources/spike-prime/downloads/building-instructions
Contact us through IG if you need more help.
⚙️⚙️
This is very helpful. Thank you for sharing. May i know where can i find building instructions for spike prime attachments for this mission?
Hello Eswar. All of our attachments were designed by us. The first attachment for collecting the water units is just built onto the yellow brick in the front right corner of the SP and just has to be the right height to pick up the looped water units. We added more “teeth” to the “comb” to have alternate hooks in case the robot is going slightly off the path.
The base for the second attachment is the same base as for the single arm or dozer blade attachments in the tools instructions for the SP advanced driving base. From there we just added the arms to get us the height we needed and decided to carry the two units horizontally to hook them. We added a pivot to the “holder” to make sure the two hooked water units would release from the axle pins as the arm swings down. Let us know if you need more info and we can share more details through IG.
⚙️⚙️
@@6006TechWarriors Excellent. Thank you for your reply. I got good understanding now. I will build these attachments and I will update you.
@@6006TechWarriors can u link the instructions?
@@legoblade5148 there are no instructions. We built these onto the SP step by step while trying to solve the mission. If the written instructions in our reply above are not clear, maybe there is an easier way you can build it. As always, our videos are for your inspiration. We are not in the business of selling ready made solutions. Let us know if you have a specific problem that you need help with. ⚙️⚙️
For the EV3 model, are you using the Gyro sensor to turn? If not, what commands are you using?
Yes, our EV3 is using the gyro sensor for turning We usually use MyBlocks for both, turning and moving straight with the gyro sensor, but this season something was off with the driving straight one, so we did not use it for any of the videos. Our SP is relying on the yaw angle sensor for both though. ⚙️⚙️
Where are the instructions for the missions?
Hello. If you are looking for the build instructions for the mission models for the „SUPERPOWERED“ season, you can go to: www.firstlegoleague.org/past-challenges?__hstc=212927755.e5446403064ab57163a9d3eabc9960a6.1715128962373.1715128962373.1715128962373.1&__hssc=212927755.1.1715128962373&__hsfp=2079238408
Let us know if you were looking for something different.
⚙️⚙️
@@6006TechWarriors We already managed to build Spike's but we can't with the others. I need the instructions for the rest, for example, the windmill and the other white, orange, and blue missions.
@@6006TechWarriors Could you tell me where the instructions are for the windmill and other things like that?
@@6006TechWarriors I already found them, thank you very much, I've been looking for them for a long time, seriously, thank you very much
@@adaluzsolarcruz7818 Please see the link we provided in our initial reply to you. There you will find the build instructions for all the SUPERPOWERED mission models.
⚙⚙
the only problem with this its that it takes a very long time
As with all our videos for this season, this is just an inspiration as to how this particular mission could be solved. In an actual match we assume that one would combine the collecting of the looped water units with different missions before and the delivery to the hooks and pond with other missions after.
⚙️⚙️
@@6006TechWarriors i was thinking the same thing and also thanks for helping us thi is my first time competing in fll and its the same for my whole we really needed some help and you offered it