you should make video of the restoration of the walls of the house in front of your gates ! great job guys, you're saving the planet more than anybody else !
Great job guys. I am just wondering from where somebody can find and get this replacement coned membranes/Diaphragms or how should I search for them, or what kind of key-word I should use for search. Thanks anyway.
Try to do something with those hands in the future, it looks like hell, with uncut nails, full of black dirt around them. Seriously, it looks like hell, especially that they're filmed up close.
The guy rides in on a scooter and wants a speaker to use. This was not a high end system he wants some music. The repair work was free so he can make another video for you
The only thing to complain about the rebuild itself is the paint job, you should put veneer on them at least, like it was before. About the speakers themselves, the only thing worth anything to rebuild here are the cabinets. The drivers are shit, the whole setup is shit. No filtering, no nothing. If these speakers were mine, it would be ok to rebuild the cabinets, but everything else here would be thrown straight out of the window. First off make a proper 3-way setup, from this fake 2-way shit. Then it has to be equipped with some decent components at least. Some drivers with good parameters, frequency dividers, some proper damping and also recalculate the port. If done this way, you will have good sounding speakers, which will make you happy for years.
Wow, that looks cheap. Probably the worst looking chip board I have ever seen, the "crossover" is a single capacitor (so the tweeter gets hit with all the low frequencies), nothing inside. Hmmm...the new box/cabinet looks fine as always, but it might produce undesired resonances.
Where to start? No design consideration went into the cabinets at all. Poorly finished. Build construction was weak. No shimming of voice coil for woofers. I'm not sure what to call the tweeter rebuild. Well, it looks like a speaker, but that's about it. Not a restoration, and not a thoughtful rebuild either.
there's always time + money in equation, chances are they *worked* (not for pleasure) on these speakers a whole day for $10, so, what do you expect. fellas did a great job saving a ton of chinese carbon emissions anyway, thank 'em for that
10:58 Seeing Speaker restoration is so satisfying.. I can view thousands of restoration videos..
Nice work
you should make video of the restoration of the walls of the house in front of your gates ! great job guys, you're saving the planet more than anybody else !
Awesome 😎 job fellas!
Nicely done 👍👍👍Thanks for sharing
FANTASTIC AND BEAUTIFUL, RESTAURATION, CONGRATULATIONS THANKS 👍🤗💯👍
Sir aap bhot aacha rastoration karta hoo
Присоединяюсь к аплодисментам в конце видео. Отличная работа !!!
I join in the applause at the end of the video. Great job !!!
Specker Rework very nice
I apreciate much this video
Beautyful work. Congratulatioms from Tupi Paulista, São Paulo. Brasil.
Welcome back uncle #MrElectricity 🙏🙏🇲🇾
Бутафорские пищалки огонь! 🙄
Фазик огонь, не посчитан, ни под новый корпус, ни под новый динамик! И с зазором. Ни единого замера.
Вот тут огонь!
Way to cool 😎brother very interesting watching content 👌👍
Отлично сделано,палец вверх.
Exelente Trabajo les Felicito Muy bien 👍
Việt nam luôn à bác
Динамикам хана, ящики в печку. Тут не реставрация а полностью новые колонки.
Làm loa bose 301 đi
ok b
Hay quá bạn ơi 👍
Que buen video
Saludos desde Bolivia 🇧🇴
That satisfaction after completion 😍
Intro super👌👌👌
lovely restoration 😍
Excelente work..felicitaciones
Nice job👍
Good job :-)
Hebat dan super 👍👍👍👍
very nice
denon nghe sướng tai
แจ่มมมมมม
Super 👌 trabajo 😃
The original case: made of MFC. The new case: made of ply wood! Speakers' sound would be different from the origin for sure!
ใจดีจัง ซ่อมให้ฟรีด้วย.
nyimak terus
💛💛💛🤗
不错的手工…
Great job guys.
I am just wondering from where somebody can find and get this replacement coned membranes/Diaphragms or how should I search for them, or what kind of key-word I should use for search.
Thanks anyway.
Sólo puedo decir Gracias 😊
*_Congratulation brother._* 😎👍🏻
🤗🤗🤗💛💛💛💛💛
Muy bueno
Try to do something with those hands in the future, it looks like hell, with uncut nails, full of black dirt around them.
Seriously, it looks like hell, especially that they're filmed up close.
mr. electric has not repaired electrical appliances yet?
💛💛💚💚💚💚
Для чего отверстие для супертвитера выпили и ничего туда не поставили 🤣🤣🤣
Nothing was there in the first place. It's just a recess for the decoy tweeter in the baffle.
💛💛💚💚💚💚💚
Эти колонки не стоили того, чтобы их восстанавливать
Как то уж они бубнят по моему. Возможно потому что ещё и вч динамиков нет. Короче, за исполнение 5, за качество звука 2)))
Магниты дохлые.
Brasil YES top
💚💚💜💛💚💛💛💛🤗🤗🤗
Mani esperte. Dovrebbero mettere in sovrimpressione le misure del box, tipo di colle usate, e liquidi vari. Grazie per questi video.
A rebuild would imply that at least some of the original parts of the speakers were used. This is not a rebuild, it's a copy of the original.
Speakers of Theseus
👍
Merko full experienced h speakee restoration ka kuki mujhe milte hi nhi h speakee kese kru fir
tweeter is fake?
why do you work on the ground? a table ?
i wonder what the solvent was he used to remove the speaker cones with , and what glue is used to glue the new ones on with ...
Acetone to remove the cones and contact cement to glue the new ones
@@yeagerxp cool thanks
Putin chemical / dog glue ;)
fake tweeter :) Sony does that too
Ok, dedo arriba.
The guy rides in on a scooter and wants a speaker to use. This was not a high end system he wants some music. The repair work was free so he can make another video for you
스피커 재생 아주 조잡스럽네요
복원을 할려면 좀 똑 바로 하세요
스피커 보이스 코일은 콘지 붙히고 콘지에서 단자까지는
전용 거미선을 사용해야함
모르긴해도 하루도 못가서 코일선 끈어질거유 ㅋㅋㅋ
Xàm quá ko lấy tiền là xàm rồi ônh
Lanjut
Ser mag kano po mag palagay NG microphone Sa speaker ipapagawa ko sana
Anyone know what they are using for filler?
The only thing to complain about the rebuild itself is the paint job, you should put veneer on them at least, like it was before.
About the speakers themselves, the only thing worth anything to rebuild here are the cabinets. The drivers are shit, the whole setup is shit. No filtering, no nothing.
If these speakers were mine, it would be ok to rebuild the cabinets, but everything else here would be thrown straight out of the window.
First off make a proper 3-way setup, from this fake 2-way shit. Then it has to be equipped with some decent components at least. Some drivers with good parameters, frequency dividers, some proper damping and also recalculate the port. If done this way, you will have good sounding speakers, which will make you happy for years.
Bro just buy some new ones there not expensive.
Crap speakers made even Crapper.Nice
La caja se podía reparar zzzz
👍🇪🇨
Its 2 way speakers system and they company put fake tweeter
denon pma-890d. $$$ ??????????????????? plis!
Wow, that looks cheap. Probably the worst looking chip board I have ever seen, the "crossover" is a single capacitor (so the tweeter gets hit with all the low frequencies), nothing inside. Hmmm...the new box/cabinet looks fine as always, but it might produce undesired resonances.
Where to start? No design consideration went into the cabinets at all. Poorly finished. Build construction was weak. No shimming of voice coil for woofers. I'm not sure what to call the tweeter rebuild. Well, it looks like a speaker, but that's about it. Not a restoration, and not a thoughtful rebuild either.
there's always time + money in equation, chances are they *worked* (not for pleasure) on these speakers a whole day for $10, so, what do you expect. fellas did a great job saving a ton of chinese carbon emissions anyway, thank 'em for that
and it was no charge!
Cheap construction.
Pomba
Certy
Marranos trabajando
Boxing
：💛💛💛😍😍💛💛💛
A nadie le cobra
finaly a not shit project
Jerry rigged
Очень не аккуратно.
Abe saale isko restoration bolte h
Jisko change krna tha coil spider cone etc isko aise hi lga diya
Bkwaaas
Здравствуйте не плохо получилось .