I bought the same kit many years ago! I end up only can use the side skirts and bumpers! Rest of the kit I reordered from Thailand. The door claddings I end up get the used OE one from eBay.
Nice to know I’m not the only one haha thanks.. but yea it’s looking sorta similar for me.. my spoilers are too bad tho.. which kit did you get from Thailand and how much was it?
17th piece may be the for the dual rear wing the Evo 2 had a two piece wing at the rear I think. But being a duraflex kit it might not be too lol. Good luck with your build 👍
I would think you will need some windscreen adhesive to glue it in? I know Hedgehog Motorsport in Thailand do nice kits and lots of performance parts including Carbon Hoods.
Yea I’ve actually talked with them a couple of times about some bodykits.. My impressions of this kit have unfortunately only gotten worse, so I’ve been considering going the more expensive/better quality route.
@@OneManOnFire ah ok.. one of my next videos should involve finally mounting that stuff up.. hopefully you’ll watch and let me know if I do it right haha 👍🏼
The front kick out where the flare doesn't match the fender is probably because you haven't installed the lower fender spacers for the sheetmetal fender.
Ciao come stai.. scusi il disturbo volevo chiederti se mi puòi aiutare vorrei comprare il spolier posteriore mercedes 190e evo 2 , come faccio a comprare, mi puòi dare un indirizzo? Grazie mille
@@logancannan2040 I got mad lucky in 2006 and bought my car as is, in yellow with a Evo 2 body kit all finished on a 16V body and engine. You can see more of it on my RUclips page.
Best Duraflex review I’m definitely ordering Pay for what you get With a Little TLC those can Be Sanded/shaped Probably wouldn’t need adpro id prime over with Plastic primer Then High build thick layer Sand Then paint
One of my all time favourite cars is the Evo 2. Subbed and can't wait to see the finished article
Increase the speed to 1.25x for better experience
I bought the same kit many years ago! I end up only can use the side skirts and bumpers! Rest of the kit I reordered from Thailand. The door claddings I end up get the used OE one from eBay.
Nice to know I’m not the only one haha thanks.. but yea it’s looking sorta similar for me.. my spoilers are too bad tho.. which kit did you get from Thailand and how much was it?
@@logancannan2040 I bought it from Hedgehog Motorsport. They selling on FB. I paid $900 + shipping for front fenders and rear arches
17th piece may be the for the dual rear wing the Evo 2 had a two piece wing at the rear I think. But being a duraflex kit it might not be too lol. Good luck with your build 👍
I would think you will need some windscreen adhesive to glue it in? I know Hedgehog Motorsport in Thailand do nice kits and lots of performance parts including Carbon Hoods.
Yea I’ve actually talked with them a couple of times about some bodykits.. My impressions of this kit have unfortunately only gotten worse, so I’ve been considering going the more expensive/better quality route.
Looks like the quality control guy was of prior to that being shipped!!! How can they let kits leave being that BAD I AM SHOCKED!!! 😯
That 17 piece sits on the underside of the top spoiler as a adjustable flap that sides in and out. Mine is solid mounted and doesn't move.
Ahh ok that was kinda my guess.. is the hook part of it meant to wrap up around the back of the spoiler?
@@logancannan2040 My guess is the top lip pointing upward is meant to sit flush under the spoiler
@@OneManOnFire ah ok.. one of my next videos should involve finally mounting that stuff up.. hopefully you’ll watch and let me know if I do it right haha 👍🏼
@@logancannan2040 I'll film a video of my kit once the rain stops
@@OneManOnFire hey also, how did you mount the door covers? I’m trying to figure out how to do it without having rivets or bolts showing.
The front kick out where the flare doesn't match the fender is probably because you haven't installed the lower fender spacers for the sheetmetal fender.
Hey man, you stopped posting. How did it end?
Ciao come stai.. scusi il disturbo volevo chiederti se mi puòi aiutare vorrei comprare il spolier posteriore mercedes 190e evo 2 , come faccio a comprare, mi puòi dare un indirizzo? Grazie mille
oh man seeing that wing is giving me PTSD. I think i've said enough lol XD
Dude same hahahahaha
Duraflex uses photos of my 190E Evo2 and won't remove those photos.
Damn yea that sucks man :/ .. which car is yours tho? Is it a real evo2? Or did you use the duraflex kit?
@@logancannan2040 I got mad lucky in 2006 and bought my car as is, in yellow with a Evo 2 body kit all finished on a 16V body and engine. You can see more of it on my RUclips page.
oh yeah i saw that the evo 2 was familiar from somewhere hahahah
Thanks for the vid bro!
Ciao ho bisogno di comprare un spolier posteriore evo due. Mi puoi aiutare dove lo posso comprare? .grazie mille.
puoi provare ebay, ma se vuoi spendere un po 'più di soldi per una migliore qualità dovresti dare un'occhiata a Hedgehog Motorsport
Buongiorno scusi il disturbo ho bisogno di comprare un spolier posteriore evo due. Mi puoi aiutare dove lo posso comprare? . Grazie mille
puoi provare ebay, ma se vuoi spendere un po 'più di soldi per una migliore qualità dovresti dare un'occhiata a Hedgehog Motorsport
Ciao ho provato a ebay e altro ma non rispondano? Adesso vedo qui dove mi dici tu . Grazie mille e buona serata
Buon giorno ho provato di comprare un spolier posteriore evo due li dove mi hai deto tu , ma non rispondano? Non ti Fano comprare.
Scusi vedo che tu hai kit evo due, ma dove li compri? Io ho bisogno solo del spolier posteriore evo due
Grazie e buona giornata
Best Duraflex review
I’m definitely ordering
Pay for what you get
With a Little TLC those can Be Sanded/shaped
Probably wouldn’t need adpro id prime over with Plastic primer
Then High build thick layer
Sand
Then paint
I recommend you watch my most recent video before you commit to ordering this kit haha
"pay for what you get" you pay more than you get with this dude
I think you made need to rethink That! As your going to want a FedEx van full of filler deliverd to you door.. Cheap Or not it's absolutely appauling!
Hi. Where did you find the details? Because I also need
Hi, Where you buy this kit?
How's this project going
Possibly something to test paint
Nice
Will this fit my 1987 300d
Are all duraflex bodykit is all black
If I paid the money you paid and got that wing all split I had refounded without boubt
Mi puoi aiutare, vorrei comprare un spoiler Evo due
To mold it a little
Foam The Fenders
Ciao
So what are your recommendations??
Shit or really shit????
Your pick lol.. definitely don’t recommend.. unless you are very patient and also skilled with body work
Come faccio a comprare? Io vivo in Italia. Grazie