Follow my journey of buying a boat on Alibaba. A link to the boat I bought (and they are now using my actual boat as their stock image!) here; www.alibaba.co...
have a prop shop put a double cup in the prop and it will stop any slipping or cavitation - I bought a 22-footer in mid 80's with two 15-inch motors on a 20-inch transom set wide - it took three trips to the shop to find the correct pitch - the second cup is the same as adding 1 pitch to the prop - you can move a prop back or forward two pitch's without hurting it and it is a lot cheaper than buying new ones - this was with Aluminum but you can do it with Stainless Steel as well -
Hi, thanks for your helpful videos! I bought more or less the same boat this year and your previous videos helped a lot for my decision to decide for the 480 from Alibaba. We already used it in different condirions in the Adriatic sea. This boat is great value for the money and my experiences are quite the same. Teak floor is fantastic! However I wonder how you prevent water geting into the cockpit via the outflow tubes under the rear seat when there are more than two people on board. Any advices are very much apreciated. Kind regards from Austria
Glad that you too have had a good experience with these boats. Yes my cockpit floods too when stationary or at very low speeds. I had considered fitting valves to the drain tubes, but as a temporary measure just used bungs in the drain holes in these situations. This temporary solution has become a permanent one now though and is working fine.
Hello Boatman I got your information about the producer in the description,that is Qingdao yacht industry & trade but when I enquired I received a mail from Shadong Rebo boat co ltd is the same producer,organization?,I dont want to be scammed
@massimoneri4669 I’ve dropped the manufacturer a message and they’ve confirmed that they have two outlets on AliBaba and this is one of them. So this is the same manufacturer, the person I dealt with there is called Claire Claire, she’s very helpful.
Thanks for posting a 2 yr follow up video. Questions I have for you. In your opinion, how's the craftsmanship of the boat, quality of the seams, paint, etc? Lastly, are you confident this boat is capable of rough water? TiA.
I actually think a long shaft would do much better on this boat, and I’ve investigated an extension plate and new driveshaft for my engine but not economical. A 20 inch shaft is ok though, just not perfect.
What was the exact cost of buying this boat delivered to the UK? How much did you pay in total? Ive watched all the videos and checked all the comments and you havent mentioned it once. Very strange.
Great review! Any comment on hypalon v. PVC longevity? I've found my PVC 360 cm from the same company a bit thin for fishing and have had to patch it a couple of times in only 6 months.
I’ve got the PVC too so can’t comment on their Hypalon option. I’ve not had any holes yet, but I haven’t used for fishing. I actually have a second new boat on the way from the same manufacturer. A SIB this time, 3.3M. Full review to come…
Yes no probs. You might as well message Claire Claire directly on Whatzapp then she can send you a quote through AliBaba. Her number is +86 156 9238 0992
Hello, first of all big thank you for your videos. I’ve just paid 30% deposit . I went for hypalon with aluminium hull but same setup. Claire is very helpful! I leave in Essex, so plenty places to take out. If i can please have your number if you don’t mind, i would like to ask some delivery questions . Tnks again
I remember your excellent initial video, and this is a really useful, honest update. Your boat has indeed proven to be a bargain.
have a prop shop put a double cup in the prop and it will stop any slipping or cavitation - I bought a 22-footer in mid 80's with two 15-inch motors on a 20-inch transom set wide - it took three trips to the shop to find the correct pitch - the second cup is the same as adding 1 pitch to the prop - you can move a prop back or forward two pitch's without hurting it and it is a lot cheaper than buying new ones - this was with Aluminum but you can do it with Stainless Steel as well -
Such a comprehensive breakdown dude, thanks for sharing!
Love to see some videos of this in action! Thanks.
Thank you for your video,I will try to buy one this spring
Many thanks, will try next spring!
Hi, thanks for your helpful videos!
I bought more or less the same boat this year and your previous videos helped a lot for my decision to decide for the 480 from Alibaba.
We already used it in different condirions in the Adriatic sea.
This boat is great value for the money and my experiences are quite the same. Teak floor is fantastic!
However I wonder how you prevent water geting into the cockpit via the outflow tubes under the rear seat when there are more than two people on board.
Any advices are very much apreciated.
Kind regards from Austria
Can you post the name of the producer or a link? thank you
Sure, just added to the description
Glad that you too have had a good experience with these boats.
Yes my cockpit floods too when stationary or at very low speeds. I had considered fitting valves to the drain tubes, but as a temporary measure just used bungs in the drain holes in these situations. This temporary solution has become a permanent one now though and is working fine.
Hello Boatman I got your information about the producer in the description,that is Qingdao yacht industry & trade but when I enquired I received a mail from Shadong Rebo boat co ltd is the same producer,organization?,I dont want to be scammed
@massimoneri4669 I’ve dropped the manufacturer a message and they’ve confirmed that they have two outlets on AliBaba and this is one of them. So this is the same manufacturer, the person I dealt with there is called Claire Claire, she’s very helpful.
Thanks for posting a 2 yr follow up video. Questions I have for you. In your opinion, how's the craftsmanship of the boat, quality of the seams, paint, etc? Lastly, are you confident this boat is capable of rough water? TiA.
Love ur videos hope u will post more type of vlogs and adventures. But i wonder so much would u prefer s motor with a long or XL shaft?
I actually think a long shaft would do much better on this boat, and I’ve investigated an extension plate and new driveshaft for my engine but not economical. A 20 inch shaft is ok though, just not perfect.
What was the exact cost of buying this boat delivered to the UK? How much did you pay in total? Ive watched all the videos and checked all the comments and you havent mentioned it once. Very strange.
Is it just two air compartments in the pontoons (I.e. one left and one right) or are they divided into more compartments?
3 compartments. The bow compartment with a safety valve.
Try a different prop, often cavitation problems are prop related.
Could you please post more video with this boat showing how it handles waves...etc...
Will do. My next video will be a summary of our trip around the Isle of Wight in choppy weather.
Great review! Any comment on hypalon v. PVC longevity? I've found my PVC 360 cm from the same company a bit thin for fishing and have had to patch it a couple of times in only 6 months.
I’ve got the PVC too so can’t comment on their Hypalon option. I’ve not had any holes yet, but I haven’t used for fishing. I actually have a second new boat on the way from the same manufacturer. A SIB this time, 3.3M. Full review to come…
Awesome, looking forward to your review!@@boatman9564
Can you send me information on where to order the boat you have? I really like it. I want make sure I get the same model.
Yes no probs. You might as well message Claire Claire directly on Whatzapp then she can send you a quote through AliBaba. Her number is +86 156 9238 0992
Thank you
Ise a jack plate for your spraying problem
would love some videos of it in the ocean in swell etc
What was the total cost of you're boat delivered?
$400 usd
@@eetswabra6780 $421 usd with teak
Thanks for the info! Any pricing information?
Hi, i maid the step to also going to buy one for Belgium diving uses. 😇 Thanks to you
Do you mind providing the total length from the back of the motor to the tow hitch? I want to see if it'll fit inside my garage. thank you.
Yes no problem. 5.2m overall on the trailer. Fits in my standard UK double garage on one side
@@boatman9564 I think I might have a foot to spare, lol. Thanks!
@@cobbs same as me!
Jimmy Carr does boating reviews
Hello, first of all big thank you for your videos. I’ve just paid 30% deposit . I went for hypalon with aluminium hull but same setup. Claire is very helpful! I leave in Essex, so plenty places to take out. If i can please have your number if you don’t mind, i would like to ask some delivery questions . Tnks again
Great, you won’t regret it. If you could give me your email I’ll send you my number
Tnks
Jesus christ... Is your microphone down the street?
What a turd 🙄
Wobbly
Gobley
Super fantastic
Permission to come aboard Captain🫡
Great vid