It depends on what you care about, as my sight, one of big disadvantages is less modification to go. I would say It's still usable because of the quality I got and what I experienced, but the shooting performance is not really amazing, gas efficiency is normal. In conclusion, it will not be the first option if you are comparing to several guns, unless you really love GBB and P90.
@@RichNoYoC i can buy a vfc mp7 gbb for 260€ and the quality is amazing. Then i can burn my money on a WE P90 for 360€ i think, poor Body, cant hop heavy bbs, all Mags+ the Gastank inside the gun leaking, and shooting performance is catastrophal. Simply its a bad gun. Nothing good at this gun.
Oh, damn, the price will be different to the country. For the guns you specified in Taiwan, VFC MP7 is only 6900 TWD(around 209 euro), WE P90 is 8500 TWD(around 258 Euro). Definitely WE P90 is not good option in your country, bro. Choose the gun you love, that's the best. Actually I really enjoy WE P90 as it's really rare gun in the game field, no one will use the same as me.
@@RichNoYoC im a P90 Fan. I really like this gun. Sadly we i the badest of all. The quality of this gun is not good for this price. Thats sad about it. I even got a fully licensed mp7 and my p90 is without license and dont work as good as it should.
Recently, there is a new P90 will be released, you may check the news for that. I'm a P90 fan, but not interested in any kind of AEG, that's the reason why I chose WE P90.
不誇張 這是我這輩子看過最喜歡的開箱
人生還長，遲早會再遇到更好的開箱
我差點以為是周星馳在介紹開箱。
👍講得很詳細，但防火帽的確是金屬
從表面看塑膠感太重，防火帽又太輕，敲跟摔地上也沒顯著的金屬聲，最後拿雕刻刀削一點面積，好像才有點金屬感
@@RichNoYoC 鋅合金(亞鉛) 或是鋁合金
解釋的好詳細.也加入了不少自己的見解...棒
這部影片有點實驗性質，能確定的是攝影棚環境還要再進行調整，要改善的部分還不少
優質開箱，推推
感謝評價，好人一生平安
吐槽一下
亞鉛合金(鋅鋁)或鋁合金本身不具磁性，用磁石當然沒效
這把我有上彈 (下彈?) 不順的問題，彈匣稍微低溫就會剩餘五發左右BB彈打不出去。還有扳機扣押越來越重，單發幾乎無法扣押必須調成連發。目前已經把槍掛牆....
這把槍算是蠻有個性的，不上彈問題我有遇過，但沒找到確切解法。至於低溫打不完是瓦斯槍的通病，但我這把冬天也有下場打過，確實有時候單發會打不完，但多數是瓦斯已經打到壓力不夠，我比較懷疑是瓦斯一開始就沒灌成功。
這個槍氣化很差，打完槍機裡面凍呼呼的，換了一個彈匣問題不會解決，不是彈匣的問題，設計本身就有問題
最近也再考慮是否入手一把p90瓦斯，推薦嗎？
我有的就是開箱影片中提供的資訊。
買這把請優先考慮你有沒有能力自己改。
你好，请问一下枪身进气阀卡死应该怎么处理呢，我没有找到你的相关视频不好意思😂
零件 #41 #51 這兩個嗎？
@@RichNoYoC 你看一看我上传的视频，他会在分离弹匣之后完全把气泄露完，枪身那个储气罐每次分离弹夹之后都会把气全部分出来，不知道是版本的原因还是什么，这把枪我买了没多久，它的枪身和弹匣接触的气阀是齐平的不是凸起来的.... 这是正常情况吗
@@RichNoYoC 是的，就是这两个零件... 我试图拧下这旁边的两个螺丝，检查了一下里面是没有磨损的，气阀就是齐平的，和你的不一样？是出厂的瑕疵吗
#51 只要陷在 #41 裡頭就一定漏氣，#41 拆下來後拿一隻十字螺絲起子頂進洞口用力旋轉做擴孔動作，只要轉幾次就好，#51 裝上去會自己頂起才是正常的
問題成因就只是彈匣抽拔多次，導致 #41 的孔徑被夾到變小，#51 卡在 #41 不會彈起來而已
@@RichNoYoC 好的多谢，我会尝试一下
火帽不是金屬製
這句話真的讓我笑了
打過幾次P-90 耳朵靠近槍機附近蠻大聲的
很大，但其實只要不是耳朵貼在槍身直接聽，基本上音量是覺得還好
哪可以買？
網路上通路很多，花時間挑選，至於還有沒有貨又是另外一回事
給個關鍵字我收尋不到
想求頭盔的出處 花色是本來就有了嗎
FMA 有出，但這色差有點嚴重，且花色邊緣過於銳利，跟迷彩服的花色相比會明顯看出差異。
想看WE G19X GEN5開箱
這願望大概很難實現
我有此槍 用過一段時間後定就會異常了
但手感真的不錯
我也想看GHK MK18 (敲碗
我不知道這何時才會出
請問你的槍上彈不順的問題有找到嗎？
換了 GHK MK18 之後我沒再碰過這把
至於上彈不順，我好像沒什麼遇到，最多就是連發很緩慢的問題找不到解法
GHK的MK18有打算開箱嗎
可以開，只是不知道什麼時候才會出
請問你的擊發數怎麼記這麼清楚的😂
每次想記錄但打完就忘了…
下場打通常只會用到固定量，以彈匣容量為單位記錄；在家打靶試槍以裝 5 或 10 發為基準做測試，怕忘記就拿計算機出來輔助
板機內不塞紙片很難扣壓
看什麼方法處理都行，接觸點能夠校正基本上單發就會正常
你請問，你手邊有 GG或 Marui的P90嗎?
想看！
需要拍的話我可以借你Marui的兩款
還有兵蜂的水彈。
我沒有指定的槍，基本上也不借槍的。你可以自己拍開箱影片，這會比我去拍還快。
umarex 击锤把击锤挡板撞裂开了这正常吗
不考慮送原廠？
防火帽是鋁合金吧，鋁沒有磁性
從表面看塑膠感太重，防火帽又太輕，敲跟摔地上也沒顯著的金屬聲，最後拿雕刻刀削一點面積，好像才有點金屬感
GHK MK18 ➕1
開箱？還得等了
你的聲音好像賭王的徒弟
We真的⋯⋯⋯
多少錢做多少事，個人是覺得這價格配上這個表現算是還可以接受的範圍，比較慘的大概是改裝品很少
How to waste money and get a broken/bad performing gun. :) dont buy this P90 from WE.
It depends on what you care about, as my sight, one of big disadvantages is less modification to go.
I would say It's still usable because of the quality I got and what I experienced, but the shooting performance is not really amazing, gas efficiency is normal. In conclusion, it will not be the first option if you are comparing to several guns, unless you really love GBB and P90.
@@RichNoYoC i can buy a vfc mp7 gbb for 260€ and the quality is amazing. Then i can burn my money on a WE P90 for 360€ i think, poor Body, cant hop heavy bbs, all Mags+ the Gastank inside the gun leaking, and shooting performance is catastrophal. Simply its a bad gun. Nothing good at this gun.
Oh, damn, the price will be different to the country. For the guns you specified in Taiwan, VFC MP7 is only 6900 TWD(around 209 euro), WE P90 is 8500 TWD(around 258 Euro). Definitely WE P90 is not good option in your country, bro.
Choose the gun you love, that's the best. Actually I really enjoy WE P90 as it's really rare gun in the game field, no one will use the same as me.
@@RichNoYoC im a P90 Fan. I really like this gun. Sadly we i the badest of all. The quality of this gun is not good for this price. Thats sad about it. I even got a fully licensed mp7 and my p90 is without license and dont work as good as it should.
Recently, there is a new P90 will be released, you may check the news for that.
I'm a P90 fan, but not interested in any kind of AEG, that's the reason why I chose WE P90.
玩槍玩到精神失常。最後跑去烏克蘭送命。
ra-tech, z-parts, wii tech有we p90的改裝品
另外,外國也有論壇集中討論we p90的問題, 可參考下
arniesairsoft.co.uk/forums/index.php?/topic/215580-we-ta-2015-p90-review/page/31/
Wii Tech 之前真的沒聽過，看起來台灣也沒在賣該牌的零件，裡頭 P90 的鋼跟鋁製品還蠻多的。
但個人其實不建議裝鋼製品，要換就是一口氣全部換，軟金屬撞硬金屬的損壞速度真的不是平常能夠想像的。
NoYoC 的生存兩三事 同意。很難得有WE P90的詳細分析, 讚丫👍
@@RichNoYoC 關於你的稀有問題，上面連結論壇好像有提過，是因為零件part no. 98卡彈，要打磨一下，但我沒遇過這問題就沒有深究了