Nicks backyardprojects oof, well fast is also usually expensive. We are getting more of a following and more revenue so this summer we’ve got some big stuff coming.
My 8yr old son loves your channel. He just got his first Kart he saved up to buy. I can see he’s already hooked and wants to mod it already. Keep up the great clean vids I can sit and watch with my son.
I had a little 80 just like that. That had killer power bands. I’m 5.5 and was 110 lbs took a high bar jump and missed the pegs. Needless to say I couldn’t walk for a few weeks. Now I’m old but at 12 years old . I never forgot. Have fun with it guys.
I had a blast hanging out with you guys Friday and Saturday, glad you liked "Spaceball 1". Next time you see it I hope to have it done, maybe with the turbo.
Two weeks to Pate 2021, got two rides I'll be bringing this year. And I think both of them are right up y'alls alley, one is rat rod and the other is my TOMB outlaw Thunderbird.
great episode.......I have had a 292 single piston yamaha snowmobile engine and an old racekart with f/r discs for a project kart for awhile, so it got me excited to see a couple really rip......prolly get to it someday, lol....good too see you guys actually motivated to get schtuff done...impressive research and dedication....... many love, much props
@@BuildBreakRepeat All you have to do is make sure to do checks before going for a drive. Brakes, steering, wheels, etc. Wear a helmet and probably some leathers, and make sure that most of the time you are on straight smooth roads.
Fun bike to ride I have the same one at my farm really fast and fun when it is tuned right make sure to clean the carb and check the float height and make Sure the reed valves are intact for more power and speed hope to see more videos of this bike
i got an engine kit on my bicycle recently. i learned a hand clutch and still broke the lever and cable 3 times. it was a rednecked brake cable anyways 😂😂😂
I've been riding bikes since I was 12. Here's how I learned: Pull in the clutch, Drop it in to first, put your heels on the ground with your toes up. Let the clutch out slowly until the bike makes your feet lie flat, and pull the clutch back in. Repeat that about 20 times until you get a feel for when the clutch starts to grab, then accelerate at the same rate as you release the clutch.
What sled do you claim this came from? If it isnt a built engine (really built.. not a can and pods..) you're dreaming. 140HP is about max for a stock 700 Triple. Good pipes will get you another 15-20HP with jetting. After that, you're digging deep into porting and matching cases and ports etc..
I have a taco mini bike with a predator 212 but it runs rough. Once it finally starts it almost bogs out and mid throttle starts popping but after a few seconds it’s like it almost hits a powerband. Any suggestions?
Let’s see - RV’s, vehicles, trailers, huge posts in the ground, telephone poles, port-o-potties, people... Yep the perfect place to run 100mph go karts.
Best one of your videos I've seen. Lots of fun, lots of motor eye candy, respect and proper handshakes all around with no ghetto fist bumps and crap. Keep doin what yer doin.
Just a thought, Maybe the oil injector is working perfectly and the pre-mix is oil fouling the plug till higher RPMs and then it clears out.. Have fun and good luck..BTW...wear a helmet next time, it is small but you still can fall
Or.... and this is merely a suggestion.. do maintenance and make sure everything is in spec. If it works (and likely does..) why would it last 40 years and all of a sudden need to be deleted? I get its peace of mind for most ppl... but in reality, they generally end up blowing shit up because they unhook the injection, mix gas and it goes boom. You need to rejet if you delete oil injection to stop it from being too lean. ..because mixing oil in the tank means less gas through the same size jets. I imagine you would have given that pointer if you had a clue. I'm not against removing injection.. I'm against telling ppl to take it off when they have no idea what to do next. But pull it off, mix gas and blow it up. Make sure the camera is rolling so when its posted... I can say I told you so!
Usually snowmobile engines dont have gears. Just saying! (None have gears.. some utility sleds have hi/low range and reverse, but that's in the chaincase, not at the engine)
Y'all definitely gotta start doing some high powered go-karts. Get youselves a CBR1000 or supercharged Ninja 1200 engine and sling that sucker on a homemade frame. that thing would be beyond stupid fast.
You sir are the master of stalling a bike.
Damn something finally fast on this channel, only took someone else building it haha
Nicks backyardprojects oof, well fast is also usually expensive. We are getting more of a following and more revenue so this summer we’ve got some big stuff coming.
thats funny
What a dingus.
I could hear those shots fired from here in Canada lmao!
My 8yr old son loves your channel. He just got his first Kart he saved up to buy. I can see he’s already hooked and wants to mod it already. Keep up the great clean vids I can sit and watch with my son.
idea: built 670 + minibike! since your power-to-weight ratio will be off the charts, 36 tooth sprocket on the front, and 16 tooth in the rear
Talan Peterson wait so your ratio is 16:36? If that’s what you’re saying that thing will barely move.
Alex 1 like he said the 670 makes plenty to get it moving
670 mini bike has been done before... The videos are here on the tube
Talan Peterson snowmobiled engines are incredible wide, not saying it’s impossible tho
That's some bicycle gearing
Love the 2 stroke content. More please 😁😁😁😁
i have a 600 etec snowmobile, it has 112 hp and is fast as shit, 10/10 would build, goes well over 100 mph and, had an insane 0-60 if you can get grip
Ryan Thornton yeah right a 600 snowmobile is unheard of going over 100
I think you may have been trying to take off in 2nd
That’s what we thought too, but it’s not like a normal bike it’s neutral all the way down and all 4 gears are up
Build Break Repeat that’s how a normal 4 speed works, on a 5 or 6 speed it’s 1st, neutral, second etc etc
Man those snowmobile karts were insane!
Sounds lime winter! Rotax power?!!
ruclips.net/video/3uQRC7x2SYg/видео.html
I had a little 80 just like that. That had killer power bands. I’m 5.5 and was 110 lbs took a high bar jump and missed the pegs. Needless to say I couldn’t walk for a few weeks. Now I’m old but at 12 years old . I never forgot. Have fun with it guys.
I had a blast hanging out with you guys Friday and Saturday, glad you liked "Spaceball 1". Next time you see it I hope to have it done, maybe with the turbo.
You guys have to build 1 of those snowmobile karts
Nice job on the learner bike. The race carts were cool.
Two weeks to Pate 2021, got two rides I'll be bringing this year. And I think both of them are right up y'alls alley, one is rat rod and the other is my TOMB outlaw Thunderbird.
great episode.......I have had a 292 single piston yamaha snowmobile engine and an old racekart with f/r discs for a project kart for awhile, so it got me excited to see a couple really rip......prolly get to it someday, lol....good too see you guys actually motivated to get schtuff done...impressive research and dedication....... many love, much props
8:25
I can hear your thoughts "Over 100? I gotta do that."
Kendalon lol me evaluating the cost of my life vs the fun I would have
@@BuildBreakRepeat All you have to do is make sure to do checks before going for a drive. Brakes, steering, wheels, etc. Wear a helmet and probably some leathers, and make sure that most of the time you are on straight smooth roads.
Those 80s are cool, nice find. Make sure there are no vacuum leaks at the intake manifold. 2 strokes hate vac leaks.
Keep meiking videos like this 😉😎. Greetings from Slovenia
This channel is so underrated
Can't wait to see what y'all do with that little bike
Fun bike to ride I have the same one at my farm really fast and fun when it is tuned right make sure to clean the carb and check the float height and make Sure the reed valves are intact for more power and speed hope to see more videos of this bike
Glad y'all had fun!
Rich on oil, leans fuel
You didn't put the snow sled gokart link in your description! LOL
Right I wanna see that
elesjuan sorry man currently looking for the vid, the guy said it was on yt but I can’t find it
snow sled lol
elesjuan I just found it, in the description. Thanks
Love the mx 80.Race carts were bad ass...
Great find guys those little mx80s are strong when running correct two thumbs up 👍🏻👍🏻
It was great meetin' y'all there! I'm sad I had to leave around 2 PM... Keep up the great work!
Go cart at 7:49
Looks like a really fun day
Good luck on finals guys. I’m getting destroyed at gatech as a ME too
Хорошо у вас! Классный картинг!
Within the first 1:30 he says cool little video nice and chill 😂
Move or change the bars forward on the yamaha
Good show chap
Haha funny i was watching all of this from the purple RV in the background didn't know it was a bunch of youtubers
Where's the link of those sno-karts running down vettes? I need to see that.
Tyler Coates I just found it, in the description. Thanks
Is the choke still on?
What happened to the rotary?
Good content, guys, those go carts are insane.
Red beards a prick. His RUclips “fame?” Made him a diva. You guys are more down to earth. Keep up the good attitudes and videos!
Lit keep up the great work love the channel and love what ur doing with ur life.... keep it up 🤩😊
you guys let off the clutch a little too quickly. try higher rpm's and let off the clutch as you go
i got an engine kit on my bicycle recently. i learned a hand clutch and still broke the lever and cable 3 times. it was a rednecked brake cable anyways 😂😂😂
Also I'm not sure about that bike but usually up is 2nd and down for 1st and he upshifted.
I've been riding bikes since I was 12. Here's how I learned: Pull in the clutch, Drop it in to first, put your heels on the ground with your toes up. Let the clutch out slowly until the bike makes your feet lie flat, and pull the clutch back in. Repeat that about 20 times until you get a feel for when the clutch starts to grab, then accelerate at the same rate as you release the clutch.
@Donny Morgan only way to do it
btw.. you put it on reserve tank.. indicator is opposite side of fuel handle.
most likely it chugged alot of water and sludge from tank
Would do that but my snowmobile is a triple cylinder powervalve 700 putting out around 160 ponies, so it would just be dangerously fast
What sled do you claim this came from? If it isnt a built engine (really built.. not a can and pods..) you're dreaming. 140HP is about max for a stock 700 Triple. Good pipes will get you another 15-20HP with jetting. After that, you're digging deep into porting and matching cases and ports etc..
Ty Olson - Cobalt, Ontario adventures! Have pipes and had a local guy who has a built yamaha and he tuned it for the most power it could make stock
I have a taco mini bike with a predator 212 but it runs rough. Once it finally starts it almost bogs out and mid throttle starts popping but after a few seconds it’s like it almost hits a powerband. Any suggestions?
What engines were they using on the go carts from a snowmobile ?
Bike is a 2 stroke may need new reeds in the intake carb seems fine
what hp are those carts? 670cc 2 stroke.. thats ALOT of power for something so small
oh, right 120hp :-)
What's the coolest thing you saw there 👀
I was there and I had a briggs side cover that I had carsandcameras sign and I had a blue bag
Let’s see - RV’s, vehicles, trailers, huge posts in the ground, telephone poles, port-o-potties, people... Yep the perfect place to run 100mph go karts.
Best one of your videos I've seen. Lots of fun, lots of motor eye candy, respect and proper handshakes all around with no ghetto fist bumps and crap. Keep doin what yer doin.
That spark plug is so done on the 80
I wanna go to that place! All that cool ww2 vehicles😋
HELMETS boys HELMETS!
How did i not know about this. I literally live 30 minutes from there. I wouldve loved to go
6:18 like a kid on prom night! No clue but trying
I am Surprised that’s your first Dirtbike
Best into on RUclips, live the song and just the Angel's its great, what song is that?
Just a thought, Maybe the oil injector is working perfectly and the pre-mix is oil fouling the plug till higher RPMs and then it clears out.. Have fun and good luck..BTW...wear a helmet next time, it is small but you still can fall
Oil injection is on the Yamaha blaster of witch I have two of one is blown up but a Yamaha blaster is a six speed full manual with a clutch.
That was dope
Never trust the old oiling systems on those bikes always premix your gas
Never trust them
Or.... and this is merely a suggestion.. do maintenance and make sure everything is in spec. If it works (and likely does..) why would it last 40 years and all of a sudden need to be deleted? I get its peace of mind for most ppl... but in reality, they generally end up blowing shit up because they unhook the injection, mix gas and it goes boom. You need to rejet if you delete oil injection to stop it from being too lean. ..because mixing oil in the tank means less gas through the same size jets. I imagine you would have given that pointer if you had a clue. I'm not against removing injection.. I'm against telling ppl to take it off when they have no idea what to do next. But pull it off, mix gas and blow it up. Make sure the camera is rolling so when its posted... I can say I told you so!
I bought a two stroke tecumseh racing mini bike called el toro custom made for $140 the thing rips
I had that exact model MX 80 wish I had kept it.
i saw rather b weldings atv
Its a 2 stroke bruvs. Its meant to smoke. It means its gettin proper lubrication
Watch a few indoor ice arena custom 4 wheeler races. They swapped in 1000 cc boosted Arctic Cat Thunder Cat snowmachine engines
I just picked up a 600 triple so you know whats goin on
670cc 120hp Go Karts! ...and they let us rip them!, how can i get in touch whit them ,
You absolutely need to build a snowmobile shifter cart
Usually snowmobile engines dont have gears. Just saying! (None have gears.. some utility sleds have hi/low range and reverse, but that's in the chaincase, not at the engine)
“I dAiLy A mAnUaL jEeP” a Jeep and a motorbike is so different
cant believe thats the first time using a hand clutch.. what bike doesnt have a hand clutch?
Nice 👍
Y'all definitely gotta start doing some high powered go-karts. Get youselves a CBR1000 or supercharged Ninja 1200 engine and sling that sucker on a homemade frame. that thing would be beyond stupid fast.
Crszy part is those 2 motors are stock and make right around 100hp once you mod them out 150 to 160hp
CarsAndCameras did one with a 80HP Ducati Engine in it
Love your vids
Air leak or and or turn down the idle on the 80
two stroke meanin its gonna smoke and it needs to be revved so it can go... and becareful of the powerband
Does the 80 stand for 1980s 😂
Easy off the clutch bud lmao
I’m sure you know this by now, but it might be too rich because you premixed it and the automatic premix is also working. So it’s double mixed lol
They're totally going tobreak the Yamaha 2 stroke
I used to have a 86 Honda xr50. C if u can found one. Hard
Your really burned them off OMG omg omg
That's hilarious my dad wouldn't allow me to ride anything without a clutch from the time I was 8 can't even imagine not being able to
Crank seal time
love the vids
100+ m.p.h. on a go cart I would hurt myself ..hell I hurt myself at 13 m.p.h. (l.o.l. I already fell off my Coleman was trying to do donuts)
Worst thing out for any cold motor revving it up that hurt to watch
wait you've never driven a dirtbike before?
bruh.mp3
Guys the carb on the 80 is way off or sucking air. Not idling down correctly lagging bad. Welcome to a real type bike world
That looks like oil smoke coming out the bike's exhaust, not gas.
Instant click👌👌👌
I had a gokart with a 60
Cc engine
Make sure your oil injection isn't connected... If you're running premix disconnect the injection
Kyle Miller you might be right, the guy said it didn’t work and I just took his word for it. I’ll have to make sure it’s disconnected.
Do yourself an actual favor and read my comments before the bike is being torn down to be rebuilt because it popped.
WHAT HAPPENED TO HIS HAIR
Amateur hour homie just dumps the clutch on the bike lol
It has oil injection and you are running mix in it ... ADUH ... Lol
James Witte lol yeah nah the guy said it didn’t work. The gear that drives it is probably stripped out or something
@@BuildBreakRepeat well looks like some more rebuild experience for you ...
spaz