Thanks for the wing content Drew! A few years ago I was helping out our sound guy but mainly heading up our media department when our sound guy decided it was time for him to move on so I was handed the keys to the sound not knowing a single thing about the wing so your videos are a tremendous help in me learning the wing and making our music sound great! 😁👍
Another fantastic video by drew. Used your initial wing effects video to setup my effects but here you take it to another level. Keep up the great work. Loving my wing because of you
Thank you Drew. It's always a pleasure learning great tricks from you. I have already learned so much to use on my x32 and passed it on to the members of my church community. I'm using it as a event technician in Germany, as a DJ and as part of the church community. I appreciate your work. Thank you and greetings from Germany!
Thanks for the vídeo. I'm working with this mixer and I diante even study sound 😂 I had to add a reverb to a Sax player that asked me for it. Amazing mixer, really fun to work with! (Even for someone that doesn't work with áudio at all)
You set up the FX bus with both EQ and FX insert points after the bus fader tap point. Wouldn’t that result in the bus fader scaling all inputs pre-fx (much like a DCA on the sends)? I’d rather have control over the return level so I’d put the FX in the first insert slot. That way the EQ would also affect the FX output instead.
Why effect send to bus and then to master? What about oposite - vocals to bus then to effect and then to master?? Any advantages/disadvatiges? My setup: All vocal send to voc subgroup then subgroub send to M2 voc master, then send to matrix1 LR I set bus 16 as post, put vocals sends to gr. 16, then buses 11,12,13 set as group, i feed them from bus 16. At bus 11 room verb, 12 vintage reverb, 13 delay then sends from effects groups gonto M2 voc master. By faders buses 11,12,13 set the ratio between them and by fader bus 16 a set how much i feed effect busses...
what you can do is move the buses around to compensate for what you are trying to do. especially if you have the latest firmware, then you can just copy the settings and routing as a preset. that we you can easily move things around.
Whats about a guitar reverb or a piano reverb. Sometimes I need a snare reverb, can the wing me give that. Does this console also provide a cello reverb. I´m a banjo player, so I would like to hear it with a banjo reverb. Can I create a reverb for a Tuba played by a 37 year old female percussionist, that sounds good in the morning at 10:00?
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
I’m so happy we’re getting more wing videos!! Thanks Drew
Thanks for the wing content Drew! A few years ago I was helping out our sound guy but mainly heading up our media department when our sound guy decided it was time for him to move on so I was handed the keys to the sound not knowing a single thing about the wing so your videos are a tremendous help in me learning the wing and making our music sound great! 😁👍
Another fantastic video by drew. Used your initial wing effects video to setup my effects but here you take it to another level. Keep up the great work. Loving my wing because of you
Thank you Drew. It's always a pleasure learning great tricks from you. I have already learned so much to use on my x32 and passed it on to the members of my church community. I'm using it as a event technician in Germany, as a DJ and as part of the church community.
I appreciate your work.
Thank you and greetings from Germany!
Another good video from you Drew. It would be great if you did more videos on the Wing.
Thanks for the vídeo. I'm working with this mixer and I diante even study sound 😂
I had to add a reverb to a Sax player that asked me for it. Amazing mixer, really fun to work with! (Even for someone that doesn't work with áudio at all)
Great video, thanks! Would love to see more videos on how's you compress, reverb, and EQ different instruments like keys, guitar, violin, etc.
Please do a video on Drum Reverb!! On the
Behringer Wing🙏🙏
Thanks so much Mr you make me enjoy my blessing gift of sound industry .GOD BLESS YOU MORE
Drew - can you demonstrate how to send effects to a monitor mix? You did a similar video for the X32. Thanks!
This was so helpful thank you drew. However can you do a video on the plug-ins you personally like to use and also how to record with the wing.
Hi Drew, Thank you for this video. Could you please do a video on how to use Waves Reverb on the wing?
Hi Drew quick question? what is the biggest benefit of sending the Verb Bus to a return?
That was my question too. It seems like it's just duplicating everything he did (or could do) on the bus itself.
You set up the FX bus with both EQ and FX insert points after the bus fader tap point. Wouldn’t that result in the bus fader scaling all inputs pre-fx (much like a DCA on the sends)? I’d rather have control over the return level so I’d put the FX in the first insert slot. That way the EQ would also affect the FX output instead.
Can you route all drum channels on a Wing to a single channel on a PM16? Create a subgroup of the drums and route pre or post.
Hey drew I was wondering if the bus for the the effects insert isn’t supposed to be stereo ?
Would love to see how to setup DP48's with HUB4 and running wireless IEM out the back of HUB4
I'm hoping to do something with those soon! Just trying to get my hands on that gear.
Hi Drew, where is your music coming from …an SD Card? Is it set by default the play/stop or how do you setup the play/stop as you are doing?
Any chance we can get some stems to download to practice with?
So how did you save presets inside the effect?
Why effect send to bus and then to master? What about oposite - vocals to bus then to effect and then to master?? Any advantages/disadvatiges?
My setup: All vocal send to voc subgroup then subgroub send to M2 voc master, then send to matrix1 LR
I set bus 16 as post, put vocals sends to gr. 16, then buses 11,12,13 set as group, i feed them from bus 16. At bus 11 room verb, 12 vintage reverb, 13 delay then sends from effects groups gonto M2 voc master.
By faders buses 11,12,13 set the ratio between them and by fader bus 16 a set how much i feed effect busses...
hey how send FX from monitor aux ?
why don't apply verb straight on vocal channels instead of using additional subgroup?
So you don't have to use one fx slot per channel
Hi Drew. I have a question? How do I send reverb to a monitor mix on the Behringer Wing?
Short answer is you can click on the Reverb Bus, go to the sends section and enable it to send to the specific monitor you want.
FYI the Verb has to be on one of the first 8 Buses in order to do this.
@@EqDiorthis is something I’m trying to figure out. Do you know why it only works on the first 8?? I need a 9th vocal iem and it can’t receive any FX.
@@sethworthenmusic Behringer restricted bus to bus routing to only the first 8 buses unfortunately.
what you can do is move the buses around to compensate for what you are trying to do. especially if you have the latest firmware, then you can just copy the settings and routing as a preset. that we you can easily move things around.
Big fan
Whats about a guitar reverb or a piano reverb. Sometimes I need a snare reverb, can the wing me give that. Does this console also provide a cello reverb. I´m a banjo player, so I would like to hear it with a banjo reverb. Can I create a reverb for a Tuba played by a 37 year old female percussionist, that sounds good in the morning at 10:00?