OldGuyDIY $100 Build DIY No Weld 500 lb Cultipacker 10" ID Culvert PVC, Pipe Concrete ATV Food Plot
HTML-код
- Опубликовано: 16 окт 2024
- Please subscribe if this video saves you time or money.
A video of the cultipacker in action can be found here:
• OldGuyDIY DIY Food Plo...
This 5' cultipacker can be made for about $100 with materials from Menards;
$5 per foot for the 10" inside diameter plastic culvert ($30), www.menards.co...
$20 in concrete (480 pounds),
1 2x4" x 12' (front and back of frame),
2pc 2x4" x 8' (tongue, frame ends and angle supports),
5' pc of 2" schedule 40 or 80 PVC pipe
6' pc of 1 1/4" or 1 1/2" steel water pipe
6 1/4"-20x 4" carriage bolts,
6 nylock 1/4" nuts,
6 1/4" washers,
4'x4' piece of 1/2" or 3/4" exterior plywood for structural supports,
12" of chain.
1 pound 3" wood screws
I t seems culvert is sold by the inside diameter. A culvert with a 10" inside diameter has an outside diameter of about 11.75".
If I make another cultipacker like this, i will probably use 8" culvert. I think that will still be plenty heavy to do the job and will be easier to get onto a trailer.
Thank you for watching.