@@bignim and if I need to flash the 1 TB version? This archive contains files for several versions. the system will understand that it is necessary to use exactly the one that is 1 TB? and the flash file is not edited. you need to edit it yourself and put a disk number and then make a link to it.
@@bignim When I asked for my disk, it was determined. but after a reboot, I decided to check the disk speed. The read speed was 10 times higher than the norm (instead of 6600 it was 68000 and so on for all indicators), but the write speed was 0. after that I decided to format the disk. after formatting, the disk disappeared from the device manager and did not appear even after a reboot. I already thought that the disk died. turned off the PC and turned it on, and only after that I was shown my PM9A1. Now the tests are running at normal speeds for both reading and writing
Наука
한국사람 맞음?
1.5 배속으로 봐야 정산적인 사람들의 말속도로 느껴짐
태어나서 처음으로 1.75배로 봤습니다 ㅋ
ㅋㅋㅋㅋ
업데이트 영상보고 쉽게 업데이트 했습니다. 감사합니다.
도움이 되셨다니 다행입니다.
이전 펌웨어가 무엇이든 7801로 업데이트하는 것이 가장 좋다는 조언이신가요?
도움이 되었습니다 추천!
감사합니다! 더 열심히 하겠습니다!
전원손실(0D),무결성오류(0E),오류정보(0F) 전부 0 으로 표시되는데요,, 그럼 펌웨어 업데이트 안해도 되는건가요? 현재 7601 입니다(00B00) 1TB
지금 0이여도 쓰다보면 예비사용영역이 줄어들거나, 무결성오류가 올라가서 하능게 좋습니다
안녕하세요 좋은 정보 감사합니다. 저도 PM9A1인데 모델명이 SAMSUNG MZVL2512HCJQ-00B 만 나옵니다. 00Bxx 이렇게 안나오는데 이런 모델은 적용하면 안되는걸까요? 현재 펌웨어 버젼은 GXA7DK2Q 으로 표시 됩니다.
00b는 삼성 노트북에서 적출된 모델입니다.
제가 올린영상은 설치 못합니다
노트북에 설치된 삼성업데이트로만 업뎃이 가능하다고합니다
일반pc이시면 윈도우 스토어에서 samsung update 받아서 한번 시도해보시겠어요?.?
안될거능성이 높긴한디…
@@bignim 한번 해볼께요. 감사합니다~
PS5 에 PM9A1 1TB 7801q 펌웨어 쓰는 분들 계신가요? 구입하자마자 7801Q 펌업 후 , PS5에 꽂으니 읽기 속도가 5279MB/s 밖에 안나오네요 ㅠ.ㅠ PS5 권장 읽 속도가 5500MB/s 인데 말입니다.
ㅠ.ㅜ
정상이에요
Please give a link to the new firmware for 1tb. I can't find it anywhere
If you are looking for the 7801q firmware, go to the link below and it is at the bottom of the video.
ruclips.net/video/fkYku5hzgDw/видео.html
@@bignim and if I need to flash the 1 TB version? This archive contains files for several versions. the system will understand that it is necessary to use exactly the one that is 1 TB? and the flash file is not edited. you need to edit it yourself and put a disk number and then make a link to it.
@@Анатолий-л6р 256GB 512GB 1TB uses gxa7801q firmware.
The video link attachment already contains the file.
@@Анатолий-л6р Modify the flash-256G-512G-1T.cmd file.
And input the disk path number appropriately.
flash-256G-512G-1T.cmd via cmd
run
end
@@bignim When I asked for my disk, it was determined. but after a reboot, I decided to check the disk speed. The read speed was 10 times higher than the norm (instead of 6600 it was 68000 and so on for all indicators), but the write speed was 0. after that I decided to format the disk. after formatting, the disk disappeared from the device manager and did not appear even after a reboot. I already thought that the disk died. turned off the PC and turned it on, and only after that I was shown my PM9A1. Now the tests are running at normal speeds for both reading and writing
목소리가 너무 좋아요~
좋게 들어주셔서 감사합니다!
PM9A1에 진심이노 ㄷㄷ