Great setup! Simple and straight to the point. You are the first small setup mobile tech who I saw carry a generator, air compressor, and a welder. My favorite ratchet was a Mac 3/8 flexhead with the hard red handle. Wish Mac still made them with that handle!
I don’t know how mobile guys do it without at least a compressor and generator. I’ve seen guys carry inverters, but generator is way better. Plus it fits fine in the truck. Thanks for watching.
Another must have :Magnetic pick up tools a must have the small and larger size ones for when you drop a nut bolt wrench etc down the gaps of engine compartment
I do mobile repairs too dude. I have certain days at my garage, other days I travel but I work on commercial equiptment and fleet vehicles for industrial Laundry factories and I do boat motors time to time . I like the set up, nothing fancy but its everything you need .
Nothing Fancy! All this Snap-On, Matco, and Cornwell stuff sure is fancy priced. Lol. The biggest jobs I do are head gaskets timing chains/ belts and transmissions/ clutches. If I can do them comfortably and without doing half ass work, I’m cool with the tools I have. All my specialty ones are mostly in my home garage along with other sets I have, but yeah I get by pretty good with my setup. So far.
Jeremy Keith Hey, so do I that’s why I d ex used to make one. Thanks, yes it’s been so hot, I’m out in Santee/La Mesa area so we feel the heat a bit more.
Greeting from Oceanside, I have the same 3 box setup for work, it took me about two yrs to set it up to be the most efficient. I had to get creative with the limited space. I do general maintenance everything from tree work to plumbing, fencing and landscaping
Those are nice, I like the Mac flex heads with the button it has to lock in place. It’s flush with the ratchet so it doesn’t get in the way like the Snap-On.
Great set up im trying to get a little organized myself... just a tip here but take your batteries out of the tool when you put them up in a mobile rig... I learned the hard way by having a grinder cut a hole in one of my boxes on the highway.
Hey bro, gearwhrench bolt biters! Dude used them 3 times and they worded awesome ! I got the 90 dollar set so have mostly what a diy guy like myself would need! Cool truck tour
I watched project farm truck do a video on stripped bolt sockets, and those performed poorly. I really like my snap on spiral sockets. Worked well for me.
Nice setup mine will be sort of similar to this I don’t do primarily mobile mechanic work but I have a Landscaping/Construction company and I have a need for multiple tools when out on the job site or in case of any repairs I need to make to equipment while away from home and the the 1 tool box I have now in my truck isn’t enough room so I will be buying two side tool boxes to go along with the the one I currently have now at the front, until I get enough income to get a utility body like you have now.
Mac axis is probably my favorite ratchet but I’m also a big fan of my stahlwille 3/8 locking flex head ratchet. As for pliers I agree snap on are my favorite only bad thing is here in the mid west they are prone to rust.
Muchas Gracias. Te invito a que mires mi otro video. Ya conseguí troke mas grande y mas equipo. Muy pronto haré otro, ya que sigue creciendo mi negocio.
I have a milwaukee packout box, been really wanting to get a bed toolbox, i just dont want to have to remove my tonneu cover as i like my belongings covered. Might have to go that route though. Love the setup you have
Nice video! I really like the set up! Have you ever worked out of a van? I’ve been working out of a van for about 10 years now. This seems like an easier way to organize and access tools.
A Sid Not much of a Van guy myself, plus I got my compressor which I use a lot and generator, which throw a lot of exhaust fumes. I’m saving up to buy a truck with a utility box. I find them more practical.
I just recently went from being mobile in a box truck that was awesome with a big back door woth a lift and woth a easy access side door cabover to a shop if you would ever be interested it a available option for sale!!!
@ICS Ivan Do you use repair software like Prodemand or Identifix? I am currently a GM tech but thinking about going mobile. What do you do when it is raining or storming outside? Living in Louisiana we get most of our rain/ storms in the afternoon majority of the time.
I use identifix, but it’s pricy for a dingle tech. Also keep great relationships with your past employers or co workers. Anytime I need diagrams, specs or any info I call my buddy/ old coworker and they have Mitchell and identifix. As for the weather, I live in San Diego, Ca, we get minimal rain. I do keep a 10ft waterproof umbrella though, helps with the rain and hot sun. I also see some techs that have canopies, but too much in my opinion.
An impressive setup of about everything you would run into "out there". You didn't mention what scanner you use. Also, do you subscribe to Alldata or Identafix?
I did, the scanner is a Zurich Zr-Pro. Yes, I am subscribed to identifix. Thanks for checking my video out, if you haven’t I welcome you to subscribe. Thank you.
CW Mobile Repair llc They’re not, I checked the part number as soon as I heard about the recall. I still did get some new 3 ton from Ac delco, just to play it safe.
It’s okay, for that price it’s one of the best ones I’ve found. Almost as good as my autel. I believe I paid $900.00 out the door, and i only did it because I found a coupon or else I wouldn’t have.
Morgan Hatfield How did you mount them, the mechanic time savers socket holder I have is magnetic and holds them in place great. The only one I have issues with sometimes is my wrench holder. But the wrenches are heavy, and it’s only the bigger ones that fall at times.
@@icsivan stay positive great video if somebody thinks on robb you it won't matter if is a shop garage or a truck they take it either way but if y if you have insurance this video help you a lot to see how much is lost 😎
@@MiguelMartinez-hm1hg Avery true, I since have upgraded to a service truck, with individual locks and I also park my truck inside a gated complex. Will be doing a video soon on my new setup.
Dang bro that's alot of tools!!!! I'm out here with my styrofoam cup!!!! " Spare tools sir, spare tools" 😂😂😂😂😂
Javier LOL. My inventory keeps growing too, I’m at the point we’re I need a utility box.
Great setup! Simple and straight to the point. You are the first small setup mobile tech who I saw carry a generator, air compressor, and a welder. My favorite ratchet was a Mac 3/8 flexhead with the hard red handle. Wish Mac still made them with that handle!
I don’t know how mobile guys do it without at least a compressor and generator. I’ve seen guys carry inverters, but generator is way better. Plus it fits fine in the truck. Thanks for watching.
Another must have :Magnetic pick up tools a must have the small and larger size ones for when you drop a nut bolt wrench etc down the gaps of engine compartment
I do mobile repairs too dude. I have certain days at my garage, other days I travel but I work on commercial equiptment and fleet vehicles for industrial Laundry factories and I do boat motors time to time . I like the set up, nothing fancy but its everything you need .
Nothing Fancy! All this Snap-On, Matco, and Cornwell stuff sure is fancy priced. Lol. The biggest jobs I do are head gaskets timing chains/ belts and transmissions/ clutches. If I can do them comfortably and without doing half ass work, I’m cool with the tools I have. All my specialty ones are mostly in my home garage along with other sets I have, but yeah I get by pretty good with my setup. So far.
Great video, from one mobile mechanic to another.
Thank you, you should check out my newer setup. I have another video on it.
I don’t know why but I always enjoy tool box tour videos! Awesome IVAN. It has been so hot down here in SD this past weekend
Jeremy Keith Hey, so do I that’s why I d ex used to make one. Thanks, yes it’s been so hot, I’m out in Santee/La Mesa area so we feel the heat a bit more.
Greeting from Oceanside, I have the same 3 box setup for work, it took me about two yrs to set it up to be the most efficient. I had to get creative with the limited space. I do general maintenance everything from tree work to plumbing, fencing and landscaping
Nice. What truck do you have?
@@icsivan I have a ford F150
Nice video, interesting to see how you have that organized.
Thank you, since I’m running out of storage area I’m planning on getting a utility truck soon. Will make another video then. Thanks for watching.
Nice setup. I have a 3 box system as well on my truck. Stay wrenching
Thank you. I’m running out storage, so looking into getting a utility truck soon.
Mac/Proto would be my favorite USA maker of Ratchets and I also am a fan of the Napa Carlyle ratchets!
Great video I like your setup!
Those are nice, I like the Mac flex heads with the button it has to lock in place. It’s flush with the ratchet so it doesn’t get in the way like the Snap-On.
Great set up im trying to get a little organized myself... just a tip here but take your batteries out of the tool when you put them up in a mobile rig... I learned the hard way by having a grinder cut a hole in one of my boxes on the highway.
Thanks. You should check out my new setup.
Awesome set up !!!
Thanks man.
Hey bro, gearwhrench bolt biters! Dude used them 3 times and they worded awesome ! I got the 90 dollar set so have mostly what a diy guy like myself would need! Cool truck tour
I watched project farm truck do a video on stripped bolt sockets, and those performed poorly. I really like my snap on spiral sockets. Worked well for me.
Nice setup mine will be sort of similar to this I don’t do primarily mobile mechanic work but I have a Landscaping/Construction company and I have a need for multiple tools when out on the job site or in case of any repairs I need to make to equipment while away from home and the the 1 tool box I have now in my truck isn’t enough room so I will be buying two side tool boxes to go along with the the one I currently have now at the front, until I get enough income to get a utility body like you have now.
Thanks dude. Hey man we all start somewhere. Keep on working hard and you’ll have a utility truck in no time. 💪🏼
Love it man 🤩❤️
Villagrans Pit Stop Thank you! 🙌🏼
Love the setup I’m working out of a crv and still buying tools lol and need more room, gonna have to upgrade love your organization
Wow! I respect the hustle, but yes having a truck or van makes it much more easy to store and keep organize.
Mac axis is probably my favorite ratchet but I’m also a big fan of my stahlwille 3/8 locking flex head ratchet. As for pliers I agree snap on are my favorite only bad thing is here in the mid west they are prone to rust.
Those Mac ratchets are nice. One thing I love about Cali, hardly any rust.
Nice setup, love me the proto-mac ratchets
One of my favorite ratchets
I have that same fan in my car, I love that little thing
Me too lol. Helps me a lot during the summer heat.
Muy buen equipo de trabajo Ivan saludos desde tierras AZTEKAS (MÈXICO)
Muchas Gracias. Te invito a que mires mi otro video. Ya conseguí troke mas grande y mas equipo. Muy pronto haré otro, ya que sigue creciendo mi negocio.
I always wondered about the zurich scanners. Can you do a review?
I have a milwaukee packout box, been really wanting to get a bed toolbox, i just dont want to have to remove my tonneu cover as i like my belongings covered. Might have to go that route though. Love the setup you have
I had the same problem, just bought a box that fits between the bed rails and is short enough to fit under the cover. Works great
That’s how I started, but with the ridgid setup the theee boxes. But now I have a service truck, will do a video soon on my setup.
Nice video! I really like the set up! Have you ever worked out of a van? I’ve been working out of a van for about 10 years now. This seems like an easier way to organize and access tools.
A Sid Not much of a Van guy myself, plus I got my compressor which I use a lot and generator, which throw a lot of exhaust fumes. I’m saving up to buy a truck with a utility box. I find them more practical.
Well done :-)
Nice setup man!!!
Thanks
Nice set up
Thank you.
Have you tried the new SK teardrop ratchets handles are similar to the Marco I’ve got a 3/8 I like it a lot
I just recently went from being mobile in a box truck that was awesome with a big back door woth a lift and woth a easy access side door cabover to a shop if you would ever be interested it a available option for sale!!!
I appreciate it, but I’m more of a utility truck guy. I’m planning on buying one at the beginning of 2021.
I might be interested if you still have it for sale..
I like your setup
Thanks.
Impressive!
Update video coming soon.
@ICS Ivan
Do you use repair software like Prodemand or Identifix? I am currently a GM tech but thinking about going mobile. What do you do when it is raining or storming outside? Living in Louisiana we get most of our rain/ storms in the afternoon majority of the time.
I use identifix, but it’s pricy for a dingle tech. Also keep great relationships with your past employers or co workers. Anytime I need diagrams, specs or any info I call my buddy/ old coworker and they have Mitchell and identifix. As for the weather, I live in San Diego, Ca, we get minimal rain. I do keep a 10ft waterproof umbrella though, helps with the rain and hot sun. I also see some techs that have canopies, but too much in my opinion.
@@icsivan thanks for the reply and info!
An impressive setup of about everything you would run into "out there". You didn't mention what scanner you use. Also, do you subscribe to Alldata or Identafix?
I did, the scanner is a Zurich Zr-Pro. Yes, I am subscribed to identifix. Thanks for checking my video out, if you haven’t I welcome you to subscribe. Thank you.
KNIPEX are definitely the best when it comes to pliers.
They sure are! Especially the groove joint pliers, I’ve tried others and they suck. They’re so good all the tool truck brands sell them lol.
Make sure you take those jackstands to Harbor freight and get them swapped out they are known to fail if they are the ones I think they are
CW Mobile Repair llc They’re not, I checked the part number as soon as I heard about the recall. I still did get some new 3 ton from Ac delco, just to play it safe.
Where did you get that wrench rack that has your snap on wrenches @7:28
It’s from mechanics time saver, either on Amazon or eBay.
My go to pliers are snap on high leverage pliers
Those are some good pliers.
Are those weather guard tool boxes?
A Sid Yes sir, the side ones were white so I sanded them down and painted them with bed liner paint.
I know it's not tool truck quality but I love my carlye ratchets.
Nick Persenaire They’re pretty good ratchets, I honestly think there the same as Snap On they are extremely similar.
Zuriach scanner any good? What you pay for it
It’s okay, for that price it’s one of the best ones I’ve found. Almost as good as my autel. I believe I paid $900.00 out the door, and i only did it because I found a coupon or else I wouldn’t have.
I tried mounting my sockets horizontally once., that didn’t last long. I hit a few bumps and they were all in the bottom of my box.
Morgan Hatfield How did you mount them, the mechanic time savers socket holder I have is magnetic and holds them in place great. The only one I have issues with sometimes is my wrench holder. But the wrenches are heavy, and it’s only the bigger ones that fall at times.
ICS Ivan in those time saver holders. It doesn’t help I have a f450 and the sites I go onto are rough enough to knock your drink out of the cup holder
How much do u have invested in the tools? Thank you
As of now roughly around 15k
Klein slip joint pliers, 42 years and counting!
Nice! I Didn’t know Klein made slip joint pliers.
What part of San Diego do you service!!!
East San Diego and East county.
ICS Ivan I’m in El Cajon
Matt G6 Nice, that’s where I live.
Have u heard of Mario’s Family Clothing
Stubby milwaukeee 1/2 in & 3/8 stubby
Channellock 8" 748 End Cutting Long Reach Pliers
Ryan S Yes! Thanks for the info.👍🏻 One of my favorite pliers.
Me being a plumber gonna have to agree with Ryan!
Tools might be more expensive then truck
Depends what people are willing to pay for either or used.
@@icsivan good video
Random but eat healthy
right on seems really busy
It sure is.
When did Cromwell start selling Bluepoint
Which tool?
@@icsivan 1/4 sae sockets on the yellow holder
Oh. Those are not bluepoint they are blue power by Cornwell.
That’s what I figured but you said blue point
You forgot to show us your guard dog... ;-)
Sixty Grit Sorry, but I can’t show you my security system. 🤣
BTW, great video! Concise and interesting.
Would a van be a nice set up. Seems pickups are costly. No room. And boxes are costly too.
Never been a fan of vans, I’m saving up for a service truck with a utility bed. It would be messy turning on my compressor or generator inside a van.
Mac 90 tooth ratchet
Somebody else mentioned that, so I went out and bought a 3/8 locking flex head, 90 tooth Mac ratchet. It’s now my favorite.
⁹
"best slip joint pliers"
??? they all suck!
cant figure out why he would help advertise to all the theives watching with an inventory an which box to hit first with most expensive tools!! smh!!
It’s also first come first serve! Lol
@@icsivan stay positive great video if somebody thinks on robb you it won't matter if is a shop garage or a truck they take it either way but if y if you have insurance this video help you a lot to see how much is lost 😎
@@MiguelMartinez-hm1hg Avery true, I since have upgraded to a service truck, with individual locks and I also park my truck inside a gated complex. Will be doing a video soon on my new setup.
@@icsivan very nice looking forward to see your service truck tour 👍 keep the hard work 💪💪
Stop moving the dam camera too much geeze
Hahaha. Ok, I’m sorry geeze.
That’s what I was thinking...geeze 😂
I van would be better
For?