My 4 screws that hold the applique on the back are spinning and will not loosen up. Any tips I’m sorta stuck at the moment and cannot reach the plate lights that have broken off
Had the same problem. I ended up just pulling the applique away from the lift gate. It damages the plastic that holds the other end of the bolts. Terrible engineering there. Nuts rust place and the bolts aren't welded into place. So it spins. I just got 3M double sided tape to hold those spots in place. We'll see how long that works
Thank you, Very detailed video. what i am looking for is the plastic or nylon bolts ans the clips that hold the trim to the tailgate. do you have a list of those part numbers and do you sell those parts? it would be a complete waste to buy a new trim piece when all i need is 4 new bolts, 4 nuts nuts and 2 clips.
What size are the clips that you snapped that piece back onto the car with I ripped mine off and I need the clips do you sell them I have a 2014 Chevy suburban
+jkid82XKon Thanks for watching! Those are just push pins and can usually be sourced at your local parts store. We recommend taking one to the store with you if possible and matching it up there! 1aauto.com
+Four_CRAZY_K’s Thanks for checking us out. It depends on which clip it is and how it is broken, unfortunately, we don't have a video specific to just the clips. 1aauto.com
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
What's the part called
I've been looking for that piece in black for a 2017 Yukon. This is the closest video I've found on removal.
Can you do this without removing the wiper motor?
Is there a way to manually release the rear window glass if you don't have the key fob?
My 4 screws that hold the applique on the back are spinning and will not loosen up. Any tips I’m sorta stuck at the moment and cannot reach the plate lights that have broken off
Did you have any luck with this? I have the same problem.
Same issue as well.
Finishing Touches - Free spinning nuts and no joy removing appliqué. Even tried cutting them, but space in that area is really tight. Any ideas?
Free spinning 10mm bolts and no joy removing appliqué. Even tried cutting the screws, but space is really tight. Any ideas?
Had the same problem. I ended up just pulling the applique away from the lift gate. It damages the plastic that holds the other end of the bolts. Terrible engineering there. Nuts rust place and the bolts aren't welded into place. So it spins. I just got 3M double sided tape to hold those spots in place. We'll see how long that works
The nuts and screws both turn in the appliqué bowtie trim. How do i get it off
Thank you, Very detailed video. what i am looking for is the plastic or nylon bolts ans the clips that hold the trim to the tailgate. do you have a list of those part numbers and do you sell those parts? it would be a complete waste to buy a new trim piece when all i need is 4 new bolts, 4 nuts nuts and 2 clips.
Thank you for this detailed video, I am going to add a backup camera to my 2007 and will have to do this on mine.
Do you’ll sale the two clips on the corners that hole it in
Do you have the part number for the two little gray clips on the outside of the applique?
What size are the clips that you snapped that piece back onto the car with I ripped mine off and I need the clips do you sell them I have a 2014 Chevy suburban
Is this part not sold anymore I can't find it looking need for 08 tahoe
+Ryan Siragusa We currently do not carry this part. Thanks for checking us out!
Where. Where are your how to window replace videos. 2010 chevy suburban ????????????
Thank you SO MUCH! This is exactly what I needed.
+Sharon O. Thanks for checking us out!
How much is one of these ran I need one
what are the name of the clips that push through?
+jkid82XKon Thanks for watching! Those are just push pins and can usually be sourced at your local parts store. We recommend taking one to the store with you if possible and matching it up there! 1aauto.com
What is the name of the bolts of it?
How difficult is replacing broken clips?
+Four_CRAZY_K’s Thanks for checking us out. It depends on which clip it is and how it is broken, unfortunately, we don't have a video specific to just the clips. 1aauto.com
What body part is that plastic actually called ?
+wayne mecus That part is called the rear "applique." 1aauto.com
Hahaha all the tahoes I've ever owned the 4 nuts were rusted in place. They didn't spin freely like this video. Fake news 😂
He didn’t actually show how to remove the bowtie…
well "locks"
....HOW....DO....I....REPLACE.....CAR. WINDOW...2010 CHEVY SUBURBAN....NO ONE. CAN SHOW ME ON RUclips....HOW BOUT YOU ????