UBT to the front again!!! Rob you guys are on your way to makin this K5 a truck to remember keep the good work!!! The frame turned out great with the black paint on it!!
Everything is looking so good I love the Detroit Wheels with a Continental Tires the way you got the frame setup with suspension the air ride looking good so far I can't wait till it's all finished
They look sharp. I think they would look killer with the center cap with the old school 3 bar spinners or whatever they called them back in the day. Can't wait to see the finished product!!
Awesome choice! I’ve been seeing these on some square body resto-mods. All you need now are the stainless “beauty” rings and the “knock-offs”, spinners!! Heck 2 the yeah!!
Plus size oem style wheels are my favorite look and these don't disappoint! It would be even better if they had trim rings like the originals. This is going to be a badass k5 Robbie!
I've used those same tires on a 2007 Charger R/T. They're awesome man. Work great in the rain, handle curvy roads superbly in dry conditions, and even do well in the snow. Hands down my favorite tire.
We had an issue with one wheel, but it ultimately seated. We used conventional knowledge of these wheels but then measured. These are pretty safe sizes/backspacing for any dropped squarebody.
God I'm setting my ways.... still old school!!! These rims are good looking, but a little to "brotherish" for me. They'll sit your project off great no doubt!!! You sold me on the Detroit Wheels though!! w.w.
When describing the specs on the wheels at the end of your video you said the fronts are 22 x 9 with 4 inch back space and the rears are 22 x 9 with 4 inches of back space. The rears obviously have less back spacing which is? That is a bad ass setup!!
Thinking about getting a set of 20x8 in front and 20x11 on back of 81 C10. Truck will have 5.5 inch static drop in front and 8 in rear any ideas on back spacing?
@@UNITEDBYTRUCKS thank you for the video. I am a huge fan. I have a question. I have the same setup on a c10 MMW control arms, 3in drop spindles. I also have a 3in Z. My question for you is I’m going 20X8 DS Delrays on front. Do you have a recommendation on back spacing. I think I need either 5 or 5.5 but I see you have the 4.5 on the 22 but they don’t offer anything more Any help would be amazing
Hey man them delrays are awesome! How much was that exact set up I have a lowered 84 that I would love to bolt them on, this video has save me a lot of time. I was thinking about the rubbing. Plus it keeps the classic style thanks in advance 👀💪💪💪💪💪💪
I would have went a little wider on the back but to each there own. If everyone did tha same thing it would be a boring truck world. Keep up tha great work. UBT 4 life!
@@UNITEDBYTRUCKS o ok got ya bro! But I called it when you first got a blazer slam it! My idea lol. Just kicking your tires buddy! Love this build. I'm going to get 1 after the 70 is done. Btw going great! UBT 4 LIFE!
They don't yet make the trim ring for the 22 yet, but I very much like the simplistic look of it without. This k5 isn't going to be flashy so I think it's going to fit just fine.
They are Delrays 22x9 all around with 4.75” bs up front (with 1” narrower control arms) and 4” bs in rear. Tires are Continental DSW06 - 265/35/22 up front and 285/35/22 in rear.
@@UNITEDBYTRUCKS I have a 81 square body and about to order these. I have a 6/8 drop kit. Not sure what backspacing I need for 22×9 with same tire size as yours. Do you suggest 4.75 on mine? Have factory control arms
@@UNITEDBYTRUCKS I ordered detroit steel wheels yesterday...white Mack edition 18s up front 20s in back ...very stressful ordering wheels that expensive
Nice wheel. But surprised how spendy they're. Can get custom wheels for same or cheaper. I really want some. But not sure worth the price. Especially since not powdercoated or center caps. Everything is extras. By the time you're done. $2K into them.
I’m like you the factory gm 15x8s with the beauty rings and caps look better not dawging these they are nice in my opinion nothing looks better than the factory wheels and tire combo on that k10👍🇺🇸
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
UBT to the front again!!! Rob you guys are on your way to makin this K5 a truck to remember keep the good work!!! The frame turned out great with the black paint on it!!
Haha thanks, Harold! We're excited about it.
Everything is looking so good I love the Detroit Wheels with a Continental Tires the way you got the frame setup with suspension the air ride looking good so far I can't wait till it's all finished
Thanks, Chad! Appreciate you tuning in.
They look sharp. I think they would look killer with the center cap with the old school 3 bar spinners or whatever they called them back in the day. Can't wait to see the finished product!!
Thank you. I really like the center cap that I got with them. Really excited to get this thing going!
Nice update on your project. Wheel & tire combo looking “proud” ! Thanks.
Thanks, Tim!
yes sir robbie those look killer brother your videos never disappoint me keep em coming
Thanks, Jeremy! Glad you're always tuned in.
@@UNITEDBYTRUCKS yes sir robbie i will always watch your videos buddy
Awesome choice! I’ve been seeing these on some square body resto-mods. All you need now are the stainless “beauty” rings and the “knock-offs”, spinners!! Heck 2 the yeah!!
Haha I'd like to have some beauty rings, but they don't yet make them for the 22s. And I really like the center caps I got with them.
Plus size oem style wheels are my favorite look and these don't disappoint! It would be even better if they had trim rings like the originals. This is going to be a badass k5 Robbie!
Thanks, man! I agree. They don't yet make the trim rings for the 22s yet, but when they do, I'll get them.
Its to bad there trim ring is ribbed.
I'm sure they will look fine.
Dude! Ya got me droolin over here! Awesome look!
Haha thank you buddy
I bought the Atturo tires you recommended in a previous video and have been pleased! Glad to see the k5 moving forward!!
Sweet! Still running those on Teddy. And for the money, they are hard to beat. That said, I'm real pumped to try these Continental tires.
I've used those same tires on a 2007 Charger R/T. They're awesome man. Work great in the rain, handle curvy roads superbly in dry conditions, and even do well in the snow. Hands down my favorite tire.
So good to know! Really excited to put them to use.
I think your video has convinced me to pull the trigger on a set of Detroit steel wheels for my 01 blazer xtreme.
Do it!
Truck look so good Robbie! I need to come check it out sometime soon when I am down in the area for school! - Clint
Bring it on, man!
Looking awesome super excited for you guys!
Thanks! We're pretty pumped.
Can't wait to see it finished, would love to see it in person at one of truck meets !
Yes sir! We'll have it out all over the country next year.
They look awesome with the cap on them.
Yes sir!
The tires and wheels look good. Another great video 👍👍👍
Thanks, Shane!
Those wheels and tires look great!
Thanks, Rob!
@@UNITEDBYTRUCKS You're welcome
Wassup wit the bead not seated all the Way on the 1st wheel!?!? How/what did you measure to get offset/backspacing!?
We had an issue with one wheel, but it ultimately seated. We used conventional knowledge of these wheels but then measured. These are pretty safe sizes/backspacing for any dropped squarebody.
Sweet tire and wheel combo!!
Thank you!
The frame looks nice painted. What did you use?
Thanks, Joe! More to come on it, but it’s currently just rattle canned. Explain that more in an upcoming video.
God I'm setting my ways.... still old school!!! These rims are good looking, but a little to "brotherish" for me. They'll sit your project off great no doubt!!! You sold me on the Detroit Wheels though!! w.w.
Detroit steel are the best. I like 15-22 inch wheels. These simply fit what i'm after.
Those are gonna look great!
Thanks, Bryan!
Looks great! Fifth wheel spare is a nice touch, im not sure ive seen anyone do that yet!
Yeah, wait til you see the rendering with it on the external spare carrier. I love it!
When describing the specs on the wheels at the end of your video you said the fronts are 22 x 9 with 4 inch back space and the rears are 22 x 9 with 4 inches of back space.
The rears obviously have less back spacing which is? That is a bad ass setup!!
Sorry about that. Fronts have 4.5” backspacing and rears have 4”.
@@UNITEDBYTRUCKS Thank you! Looking forward for upcoming progress.
Thinking about getting a set of 20x8 in front and 20x11 on back of 81 C10. Truck will have 5.5 inch static drop in front and 8 in rear any ideas on back spacing?
@@UNITEDBYTRUCKS thank you for the video. I am a huge fan. I have a question. I have the same setup on a c10 MMW control arms, 3in drop spindles. I also have a 3in Z. My question for you is I’m going 20X8 DS Delrays on front. Do you have a recommendation on back spacing. I think I need either 5 or 5.5 but I see you have the 4.5 on the 22 but they don’t offer anything more
Any help would be amazing
Very nice ! I saw a video a while back and you were unloading the boxes . I was hoping they were going to be these wheels . They look good .
Thanks, man! Really happy with them.
Thanks, man! Really happy with them.
#UBTK5 is coming along great. I'm sure we haven't seen the ugly struggle behind the scenes but the wheels n tire on the chassis is looking sweet. ✌
Thanks, brother! The next video has quite a bit of work and a little struggle but it's all good.
Super clean look already even without the body on
This is my favorite stage. I love getting them to the point of rolling.
Great choice looks killer Makes me want to get a set for my 72
I think these wheels shine on a 67-72!
Nice wheels and the frame looks killer man 👍🏼🔥🔥🔥🔥
We’re getting there! Full video on it coming soon.
Cant wait.
Perfect wheels and tires for that k5
I think so too.
Very hip. Nice!
haha thanks!
Very good looking wheels and tires
I agree!
Robbie don't get me wrong I like them but I think everyone are liking them being I see them on so many trucks. Keep them coming.
Yup, but they achieve that dressed up factory style look. And you don't see them on bagged k5s very often.
Looks Great!
Thanks, Kevin! Come on by and check 'em out.
wheels look killer man
Thanks, man! Really happy thus far.
@@UNITEDBYTRUCKS cant way to see it when its done
Wheels look amazing..👍
Thank you!
That’s killer looks stock but bigger. Going to look great. 👍
Yes sir! That's the plan.
Great job 👍
Thank you!
The #UBTK5 looks amazing with killer frame and the combo of the @detroitsteelwheelco / @continental_tire looks awesome!!!
Thanks, man!
Those are sick!
Thanks, brother!
Looking good sir!
Thanks, Nick!
Looks great !!! Did you paint or power coat the frame ?
Paint. And it's just rattle can. I'll have more on that in an upcoming video.
Looks awesome, should have told Noah to clean up a little!!!! Lol
Haha he looks sharp to me!
Damn I wish I could afford those Detroit wheels. Bagged my 61’ I might have to get a 2nd job.
Do it! Could be worth it haha
If you can bag a 61, you can afford $1200 for some rims bruh 😂👌
Hey man them delrays are awesome! How much was that exact set up I have a lowered 84 that I would love to bolt them on, this video has save me a lot of time. I was thinking about the rubbing. Plus it keeps the classic style thanks in advance 👀💪💪💪💪💪💪
Looking good
Thank you!
Nice wheels!!
Thank you!
What do ya do about hubcaps ?
Watch til the end and you'll see the center caps.
Cool wheels
Thanks, Gene!
Will you be making the trip to Dawsonville this weekend? Like to see teddy and meet the family.
No sir! We are headed to Oakboro, NC for the C10 Fall Revival. What's going on in Dawsonville?
UNITED BY TRUCKS moonshine festival
Want a set of these for my 72. PO put on the same ol' Ridler wheels everyone puts on their trucks.
Detroit Steel Wheels can fix you up
You better have some big brakes lined up, that’s a lot of rolling mass.
We'll just have to see. I stop them pretty well on Teddy.
I would have went a little wider on the back but to each there own. If everyone did tha same thing it would be a boring truck world. Keep up tha great work. UBT 4 life!
Yeah, they only offer that width without having to go completely custom and the time becoming a lot longer.
@@UNITEDBYTRUCKS o ok got ya bro! But I called it when you first got a blazer slam it! My idea lol. Just kicking your tires buddy! Love this build. I'm going to get 1 after the 70 is done. Btw going great! UBT 4 LIFE!
Are you going to put on the beauty ring ?
They don't yet make the trim ring for the 22 yet, but I very much like the simplistic look of it without. This k5 isn't going to be flashy so I think it's going to fit just fine.
Are those Delray wheels the same size or different size in the back?
They are both 22x9s but the backspacing is different front to back. Tire size too.
have you ever seen a larger tire than 255/35/20 on front of a 69 C10 with 4/6 drop?
Yes I’ve run 255/40 on 67-72 without issue. And prefer it.
Dang I gotta get me some rims like these Fa sho !! Looks good bud
I dig them myself. :)
Love the wheels and tires. Those valve stems seem overly long though.
Thanks!
What offset did you end up running on the wheels?
They are Delrays 22x9 all around with 4.75” bs up front (with 1” narrower control arms) and 4” bs in rear. Tires are Continental DSW06 - 265/35/22 up front and 285/35/22 in rear.
@@UNITEDBYTRUCKS I have a 81 square body and about to order these. I have a 6/8 drop kit. Not sure what backspacing I need for 22×9 with same tire size as yours. Do you suggest 4.75 on mine? Have factory control arms
Y’all ever down in Fayetteville?
Not usually. We burn up the roads for sure.
UNITED BY TRUCKS to bad.
Easy to clean classic but modern look
No doubt!
nice.....
Thank you!
Cool
Thank you!
So we're just gonna ignore that K5 in the background at 2:11
haha
In gonna get some new mufflers for my 2001 dodge ram 1500 😀 Jones flow pack no cats
There you go!
AHHWWW PornWHEELS 👑 👑 👑 👑
✌️♥️😀 Detroit steel ✌️♥️
U B T ✌️😀♥️👍
Fo sho!
Rims Sexy..... SMASH THAT THUMBS UP 👍👍👍👍👍😎🔧😎🔧😎🔧😎🔧😎🔧
Yes sir!
What's the price on just the rims
Roughly around $2k the way I have them configured and I ordered 5. Give Detroit Steel a call and they will quote your specific needs.
Thanks Buddy love the videos keep them going
@@guillermowr7338 sure will!
My bad buddy I was going to ask you to how can I get a United Truck sticker I'm working on my 85 and your videos are motivating me
@@guillermowr7338 thanks, man. visit www.unitedbytrucks.com we have all of our UBT gear there. Use code UBT25 for 25% off til 1/15/20. :)
What year is c10
It's going on a 2wd squarebody blazer
I want these on my 51 Ford f1
Detroit Steel can make it happen for ya
@@UNITEDBYTRUCKS I ordered detroit steel wheels yesterday...white Mack edition 18s up front 20s in back ...very stressful ordering wheels that expensive
@@zacbabcock4223 So awesome! Yes, it is, but worth the investment.
👍🏼
Привет!!! Классные колёса!!!!!
Nice wheel. But surprised how spendy they're. Can get custom wheels for same or cheaper. I really want some. But not sure worth the price. Especially since not powdercoated or center caps. Everything is extras. By the time you're done. $2K into them.
That's true, but I don't know any other custom wheel you can by for that price. Billets are $3500+.
5:13 That tire isn’t seated
Needs beauty rings...
I’m like you the factory gm 15x8s with the beauty rings and caps look better not dawging these they are nice in my opinion nothing looks better than the factory wheels and tire combo on that k10👍🇺🇸
They don’t currently make the beauty rings for this size. Only 20s.
I love them too, but this is the look we’re going for on this build.
@@UNITEDBYTRUCKS looks good to me to brother
Valve stem to long they have shorter one or all metal ones. Little details
Looks just fine to me.
Continental are about as good as General tires,lol.
haha I'm really happy with the quality