Redragon Kumara K552 mod (redragon k552 + Akko CS Vintage White)
HTML-код
- Опубликовано: 9 авг 2021
- #Redragon #AkkoSwitches
My first ever Mechanical Keyboard Modification!
7 hours all in all from dismantling, lubing to installing HAHA pero worth it
Enjoy ze Vid!
From:
Stock Outemu Redragon Blues Switches
Stock Keycaps
Added foam for sound Dampening
Holee Mod Stabilizers
To:
Lubed Akko CS Vintage White Switches
OEM Doubleshot PBT Red Keycaps
Added foam for sound Dampening
Enhanced Holee Mod Stabilizers
Music: Syn Cole - Gizmo [NCS Release]
Redragon Kumara K552
Akko Vintage White
SW-92SA grease
#Redragonmod #AkkoMechanicaSwitches #AkkoCS #Akko #RedragonModification #RedragonK552mod #RedragonK552 #K552 #RedragonKumaramod #RedragonKumaraK552mod #RedragonAkko #RedragonAkkoVintageWhite #RedragonVintageWhite #AkkoRedragon #AkkoSwitchRedragon #AkkoSwitchesRedragon #AkkoK552 #AkkoLube #Akkoswitcheslube #AkkoVintageWhiteLubed #AkkoLubed #Akkoswitcheslubed 
Развлечения
WOW! Nice bro! Keep it up i love MKb mods
Now I really think about those swithes for my Kumara, thanks!
Akko Switches are the best budget switches! ❤️
Try cs red roses
@@bigpablo7869 Springs r progressive and even though you barely feel it, imma stick with the whites
I looked at those keycaps and I wanted them so badly good thing found it hey look amazing🔥🔥🔥
Thank you so much! ❤️
great vids and underrated new sub
Thank you 🙆🏻♂️
Absolute great work man. I just have a question. Is only the k552 rgb variant hotswappable, or does the solid back light have the same ability?
They should have the same features, just not perkey rgb. Keep in mind though that the Hotswap in most redragon budget keyboards like the k552 does not support every switches like mx switches because it's a 3 pin hotswap board with smaller holes. So because of that it is only compatible with other outemu switches or if you want to get some nicer ones, akko switches are great for it since it's also compatible.
thx for the help man
Thank you for answering! :D
Cool build man. How long did it take to lube the switches? Do they feel heaver after lubing or lighter?
This was my first ever custom keyboard and it took me 8 hours to lube the switches, adding foam to the case and between the PCB and the Metal plate last lastly is Holee modding the stabilizers. Yes it is my first time, it was tiring and my hands were hurting at that time.
@@juanxcarlogaming01 Jeez, I didn't know it took 8 hours. I am planning to lube switches and that seems like a hard task. I hope having less switches will make it less time consuming.
@@tiamatjax7819 it was my first time and I have no knowledge yet on how to lube and in that 8 hours I was watching tutorials too on how to lube and do other mods. Actually it is easy and fast to do the lubing and modding. You can do it less than 8 hours.
Hey i have a question. Can use any of the akko switches? Like for example will allow V3 cream yellow fit?
Did you have to desolder the stock switches? Replacing the Outemu with Akko, did you have to mod the Akko inorder to fit?
My K552 is hot swappable and I didn't mod my Akkos, I just lubed them and it is good a fit. It's like plug and play.
those Red keycaps with RPB just looks 🔥🔥🔥🔥🔥🔥
:EDIT: what are the name of those keycaps?
I have another question, When I remove the stock Outemu switches, can I just put the akko switches on the keyboard or I need to mod the switches?
the switch is plug and play. it is up to you if you mod the switch like lubing or adding some film.
Awesome man. Did you have any pinging noises coming from the keyboard when you first got it? Just got mine and it's driving me crazy even with dampening foam.
Thank you, man! Yes i do have pinging at first but after i put dampening foams and doing the tempest mod (putting masking tape under the PCB) the pinging noise was gone. Maybe Tempest mod can help get rid of your pinging noises.
@@juanxcarlogaming01 bruh none of them work
@@monkeybutt1122 maybe u flipped the stem in the wrong way or direction thats why it is hard to push
@@juanxcarlogaming01 nope
I encountered this too just put a foam between the pcb and plate to avoid the solid contact to the pcb
Hi, I have a question, so I have a redragon k552 and I swapped the switches with Akko cs vintage whites, it works, but for some reason the switches are very wobbly, it’s also very easy to be taken out, and the switch won’t go fully in the keyboard , how can I fix this?
I had the same problem too and what i did was I forcedly push the switch until it doesn't move or wobble like the switch is fully in. Once the switch was fully in, I carefully pull the switch and put it back again to make the socket slightly big and for future switch upgrades. Now it has no problem at all. That's the problem of K552 some sockets won't let the switch pins go in fully.
PS. If you force push the switch make sure you align the pins to the socket so that you don't get bent pins
Hi, i bought some akko red rose, they barely fit in the holes, but they work great, yours fit perfectly in the metal holes?
Yes they do fit perfectly. At first it's kinda hard to put the switches in the PCB because it is tight and I got some bent pins. After several plugs and unplugs it made the hole wide (for my keyboard) and it made it easy to install the switches.
Goood ❤️❤️❤️❤️❤️
Thanks ❤️
*me realizing how much money and effort was spent on a keyboard that can’t even match to another keyboard that hasn’t even passed 70 dollars*
I feel like it’s much better than a 70 dollar keyboard
Did you have to solder the Akko cs switches into the keyboard or can you hotswap them?
No soldering. The PCB is hot-swappable.
Hi , will they sound good if I put them on a stock k552 with no mods and I’m not gonna be lubing my vintage whites
Modding the keyboard and lubing the switches are just personal preference if you want to achieve good keyboard sound. I modded my keyboard and lubed my switches because I don't want to hear the sound the scratchiness of my switches and the pinging sound of my keyboard when I type. In the end it is just personal preference. 😊
Im getting the jelly blacks, definitely better for mec35g is to low
do you have k552 RGB or the red light version..
i have a red light version , i need to know if that is hot swappable too
I have the single light or red light version. It is hot-swappable.
@@juanxcarlogaming01 thank you so much
@@hassankhangaming you're welcome
r u using the stock stabs?
In this video, yes.
2:14 enhanced holee mod??? any tutorial vids about 'enhanced' holee mod?
Try putting Red Rose CS switches on it lubed they are great equivalent to vintage whites but I think are better
I ordered Radiant Red and might make a video about it 😊 Stay Tune.
How does this work? Akko is a 3 pin switch and the k552 is a 2 pin board. It should only be able to hotswap with outmeu
There's no such thing as 2 pin board, what do you mean? Yes, Akko and Outemu are 3 pin switches and there are somewhat the same. K552 boards are not 2 pin boards. K552 boards only support Akko and Outemu switches so the K552 board has 3 pin slots for those switches.
Hello! I have a question for you. Does the single color edition Hot-Swap?
Yes. Like mine. 😊
@@juanxcarlogaming01 Thank you!
im subscribed
Thank you so much! ❤️
Do Akko and Outemu have the same size of switches?
Yes! They are the same.
Just to be sure does this work on the white version, and is it hard to put, do I need to like unscrew the keyboard or something because I really need to know I might buy them
Like is it I just pull the normal switches out of the Redragon k552 and put those switches in do I need to change anything else? Please answer I really need it
It is very easy to install ANY switches in Redragon K552 just make sure to align the pins to the holes so that you will not get bent pins. There is no need to unscrew any screws, just plug and play. Just be careful with the pins and align it properly.
@@juanxcarlogaming01 alr thank you so much
@@juanxcarlogaming01all of the akko switches fit in the k552 with no mod? Sorry for the bad english
@@UnTalChao yes.
@@juanxcarlogaming01 thanks
where di you get those keycaps from
From Shopee
Hey, did you have to clip the pins or anything? Someone else is saying that i'm supposed to clip the pins
There are 2 types of switches, there are 3 pins and 5 pins. 3 pins are just 2 metal pins and 1 plastic pin in the middle. 5 pins are 2 metal pins, 1 in the middle and 2 on the sides that's why you need to clip it or it depends on the PCB if it supports 5 pin. For my switches, Akko Switches, it has only a 3 pin switch so there is no need to clip or something.
hi buddy. can you give some tips on how to remove switches it is very tight for me and i dont want to damage any component in my keyboard
We have the same problem, my K552's stock switches were tight. When pulling switches using switch puller and it's tight to pull it out, clip the switch puller on to the switch and just wiggle it gently while pulling.
This keyboard is a hot swappable one, right? You didnt have to sauder the akko switches?
Yes, new gen Redragon K552 PCB are hot swappable. There is no need to solder.
Outemu hot swap sockets only
@@kabes1776 the akko switches are 3 pins, so they can fit the outemu sockets aswell
How do i do the holee mod with bandaids can you pls do a tut on the reddragon cuz the rest of the holee mods are on other keyboards and its confusing
Soon. I will make video.
@@juanxcarlogaming01 i did it with a tutorial but it feels mushy and hard to push down
@@monkeybutt1122 maybe u didn't do it right
@@juanxcarlogaming01 i did i followed all the steps lubed it with the little bit i had but it still didnt work
@@monkeybutt1122 I'll make a video about it. Soon
honestly, I prefer these with a hollow keyboard
Yes, personal preference.
I'm trying to choose a linear Akko switch, do you know which one, from white,rose,red and green are the least scrachy and with lower ping?
The 3 switches you've mentioned are scratchy and pingy when they are not lubed. Matcha Green has the heaviest operating force 55g, next is Rose Red 48g and Vintage White the lightest 40g. It depends on the preference. For me, I love light switches because it won't hurt my hands while gaming or typing for work that is why I choose Vintage Whites.
@@juanxcarlogaming01 thanks for the answer! I thought that for having a lower actuation force and pop, the whites would be less scratchy and with a lower ping than others like green for example. But I guess I'll still go with it xD.
@@Arteecy you're welcome, man!
@@Arteecy I reccomend matcha green if you want a thocky linear switch (when lubed)
How do you put on standoffs?
can all of the Akko switches fit in it like the lavender ones because i want them
Yes, it will fit perfectly like my vintage whites.
this is really k552-SP = K552-KR = KURAMA RGB K552. ?
i got a question too so basically one of my switches stop working and ive had no choice but to pull it out and check whats going on well i dont have a switch puller and the choice i had was a screwdriver so ive sucessfully pull the switch out but one of switch pins broke and its stuck with the pcb so what should i do pls help
In that case, If you have a thin tweezers you could get the broken pin out of the pcb socket or another way is to dismantle/disolder the pcb socket. That's all you can do. I hope it helps.
@@juanxcarlogaming01 im sorry but i tried everything i could
i think so the last opinion is desoldering
@@juanxcarlogaming01 do you have discord
Im wondering why my Kumara red dragon Pcb is soldered, anyone knows why?
When did you buy your Kumara? The new ones are hotswappable, the old ones are not.
What is a Holee mod stabilizer?
It's where you enhance the stabilizers so that it won't wobble and sound bad in using.
do u need a software for the lighting?
so it can be one color?
The variant i have is only one color. There are other variants like RGB and no lights. There is no software.
I found out that you can erase the redragon logo and it looks a lot better
Yes, but i love the logo of Redragon. :D
redragon k530 have the same pin size like k552 ?
Yes
are the akko cs vintage white linear?
Yes, they are linear.
Is redragon k552 really hotswapable?
Yes it is. It uses outemu hot-swap sockets.
di ko alam kung anong bibilhin ko ee tong akko cs switch or ung mute series ng outemu
Kung gusto mo may thocky sound mag Akko CS ka and if gusto mo ng silent mag Outemu silent series. Personal preference lang po hehehe
bro no extrañas tus switch azules, yo pa no extrañarlos me compre otro teclado XD y tengo el de switch azules
Los interruptores azules apestan un poco debido al sonido, pero al final prevalecerá su preferencia personal. ja ja
@@juanxcarlogaming01 jajaja tienes toda la razón son un concierto XD
whats your microphone?
In the video, I only used my iphone earset mic. Currently I'm using Razer siren mini.
taga asa ka bro? :D
Taga Misamis Occidental bro 😊
Do you have a link for the key caps?
shopee.ph/product/47667776/1156013700?smtt=0.72023923-1647176439.9
how does it sound without foam mod.
This... ruclips.net/video/EasrUo5rOy4/видео.html
I used no foam and no tape mod in that vid.
My monitor wobbles like crazy too! Any fix for that?
i don't have a fix with that. My monitor wobbles but it is fine for me. :D
Only complaint is that the keycaps you chose don't go very well with the k552's black color...
Otherwise great! :)
Thank you! Actually I spray painted the case from black to white, but too sad I didn't record the process. :(
Is this hotswappable with Akko Radiant Reds?
Yes
Where did you buy the keycaps and switches
Shopee 😊
@@juanxcarlogaming01 thanks
is it easy to pull out the switches? thank you
For the stock switches (Redragon Outemu Blues) yes, but for the Akko vintage whites slightly tight.
do the tape mod
have you tried erasing the logo using an eraser?
Nope, I didn't erase the logo because I like it. :D
What is the name of the keycaps they look cool
Red OEM PBT Keycaps :)
@@juanxcarlogaming01 thank you
Is that considered a thock?
I'm not sure, but if I put the standoffs it will sound thocky. Here's a vid. ruclips.net/video/LayUijWMEOg/видео.html
Can you do a video on how you did the holee mod and how to take the stabs out and stuff?
Soon!
Will akko ocean blues also work????
Yes, since akko switches are the same in terms of housing. They fit well.
@@juanxcarlogaming01 YESSSSSS TYSM NOW THAT I KNOW I ALSO KNOW WHAT SWITCHES TO GET FOR SURE
@@halalwuu9618 😉
is the k552 hotswap keyboard??
Yes
some version yes, but my k552 soldered
we have the same keyboard but how come my outemu blues dont look like yours?
Maybe because you have the older version of K552. 😊
@@juanxcarlogaming01 i see.. but even if mine is old i can still change them to akko switches right?
@@nyareli1 the old version of K552 is not hotswappble but you can change to Akko switches by desoldering it.
@@juanxcarlogaming01 if i remember correctly the k552 bundle set I bought last 2018 had a sticker saying diy hot swappable switches so I'm guessing mine could work
@@nyareli1 check your PCB if it is green and if it is green it is hot swappable.
how much mm foam?
3mm
Hi bro, where did you buy these red key caps?
I bought it in Shopee for 300php+/5-6$ 104 keycaps
tutorial?
ruclips.net/video/R8bOmbXkDKo/видео.html&ab_channel=JuanxcarloGaming
Are they lubed?
What do you mean? You didn't finish the vid dont you? 😆 yes they are lubed
@@juanxcarlogaming01 how much you want for it
@@j0rd4n47 u want to buy his keyboard ? hahahaha\
@@adamwayne487 no
howswappable po ba yung K552?
Depende sa version ng K552 pero sa akin hot-swappable
@@juanxcarlogaming01 san mo po nabili?
@@rhythmkeebs sa shopee
Pinoy ka po?
Yes po
@@juanxcarlogaming01 pwede pa gud po gusto ko sana mag mod k552 rgb keyboard ko blue switch
@@kuzzzzzzzzzzzz7511 advice ko lang po hindi suggested e mod ang blue switch. Ang magawa mo lang sa K552 blue switches mo is yung tape mod, foam mod and stabilizers
bro get a shirt lol
No.
WHY WAS YOU LOOKING THERE?
my guy where is your shirt
Watchu mean?
bro im the beginning you werent wearing a shirt
@@lumen3dits u sure? Haha
Watch it again
yeah at 0:01
Outemu is vary bad
Not all outemu are bad. 😊
The original sounds better. Lol.
Personal preference.