RhacN'Roll Geckos - Gecko Cove Podcast Episode 19

Поделиться
HTML-код
  • Опубликовано: 8 янв 2025

Комментарии • 9

  • @jordanshurtleff1735
    @jordanshurtleff1735 10 месяцев назад +2

    Hey guys! Hatched out a clutch of crested and a clutch of gargoyles this week! Solid week

    • @geckocove
      @geckocove  10 месяцев назад

      That's amazing! I am on cloud nine each time I hatch anything. That feeling doesn't lessen as time goes on..... well at my scale. :P

  • @Category5_Geckos
    @Category5_Geckos 10 месяцев назад +1

    the tanks closest to the pump might just need same diameter hose from main to the branches to the sprayer nozzles. But as you get further away you will need to get a tube fitting that steps up to a bigger diameter to push more water with less pump force. Then use the smaller diameter hose to branch to the spray nozzles. More water naturally will mean more pressure going into the smaller line in theory helping the pump do its job. You will have to play with different size hose and fittings to really dialing in!

  • @Category5_Geckos
    @Category5_Geckos 10 месяцев назад +1

    Try to go up in diameter of the main line run of the water line, stay the same diameter you are currently using. The theory is pushing more water through a diameter bigger into the branches that are smaller should help the pump pressure by causing a natural pressure from the diameter differences. I got this theory from how HVaC trunk line systems are set up with blown air!

  • @Category5_Geckos
    @Category5_Geckos 10 месяцев назад +2

    Ok so I may possibly have a solution to the issue with the pump not being able to push the water through the length of hose for the spray system.

  • @jordanshurtleff1735
    @jordanshurtleff1735 10 месяцев назад +1

    Waiting on some fertile leachie eggs

  • @ShaneCole
    @ShaneCole 10 месяцев назад

    I'm working with yellow pattern