We Fabricate a Custom Roll Bar/Light Bar For Our ULTIMATE Trail Rig!!!
HTML-код
- Опубликовано: 22 янв 2022
- Justin and I build a sweet Roll bar for the CUCV. Also I catch myself on fire again... no big deal..
Don't forget to grab your JH Merch at www.baldeagle.com
Love the retro 80s look! Being an 80s kid this is what I grew up dreaming of owning!
The reason why the roll bar back in the day was taller is so your lights would shine in front of your truck not way down the road. With it level the cab is going to block the light causing a big shadow in front of you.
We kinda figured that out. But we’re working on it. Lights haven’t been hooked up yet. But we will test em when done
@@JHDieseland4X4 could make "u" shaped brackets instead of tabs to lift the lights a bit, pretty easy solution.
Only if the lights are flush mounted to the pole. Using a bracket to secure them may raise them up enough to avoid this scenario. Good looks tho.
"Your on Fire Ricky Bobby." 🔥
Trust me your not the only one who has ever done that.
I’ve done it with shirts, shorts, pants, name it. Lol, also shout out to Florida Man welding in Crocs
@@Andrewlang90 yea how about a desertman that does it bearfooted
Now you definitely need a “Your not on fire Ricky Bobby shirt” cause that’s just hilarious 😂
I’m diggin the whole, keep old school looking old school thing you have going for this truck.
Truck is looking bad ass!!!! Love the ole school look for sure.
My '79 F350 had a twin loop/ long kicker in chrome with the 4 BIG square KC's forward, 4 small pointed to the back, 2 amber rotators, and a small KC to each side. And yes 130amp alternator and dual batteries. Wish I still had that truck.
The 429 could move mountains at just off idle. I swapped it from a 400m
My guy is welding in crocs!? True Florida man... plus I love the exhaust pipe roll bar. Haha. That'll hold up great!
Better probably, than the bedside its bolted to
Proof those t-shirt's are made with quality cotton!
So sick bro... 80's all the way baby!!!
HELL YEAH BROTHER make it look like the truck on FALL GUY doesn't get any better
Quick lesson: don't stand directly in the path of the sparks! 😆
Damn you're always blowing up or lighting on fire. 👍🏼
I'm loving the OSHA approved closed toe welding shoes !
Growing up watching the "Fall Guy" love the 80's looks of the square bodies.
That rig is looking badass I love the old school roll bars like that
Fire! Stop drop and roll JH! Or just empty the fire extinguisher on him. That would be too funny.
Great intro. 😂
Welding in shorts and Crocs, best Florida man shit I've seen in a while. LOL
Love that loook Jh woulda love to see it abit higher but still looks very 80s fricken love it dude
JH y'all rock! Love the channel and content! I'm here for the algorithm! Peace
‘80’s lingo, that’s a show bar ✌🏽😎 can’t wait to see the finished product
When I was little my dad had an 85 k20 blue and white had a bar and lights like that. I’m a square body guy for life 🤙🤙
Awesome..... Gotha watch them sparks
This truck is looking radical dude!
This unit gets more bad ass with everything you doing to it. Keep it up brother love everything you guys are doing.
That bar is sick. I’m totally an 80’s kid too. Grew up with this look
Justin is the man , always around to save the day!!!
Looks amazing old skool look baby!!! Hells yeah brother!!!
Love this truck build!! That rack is sick!
Hard to beat the looks of a squarebody! Good work as always JH.
Just like my old one in the 80s I fukn luv it..Brings back the feels. Definitely hits all the rite spots JH best build ever!!
Dude the main hoop went to the bed floor and down bars to the top of the wheelwells to be true old skool
Old school 👌👌👌 only way to go
Dang Man I Swear I thought I was going to be the first to do it 😕.. I guess you have to know the Art of bending pipe! AWESOME! 👌
Looks So Good!!!
It’s super cool but I wish it was mounted to the frame. But what’s cool is it’s your truck so you can do it however you want
JH's merch is on fire....
loved the 80s theme! evan the workplace safety was just like the 80s! love it!!!
Opening moments had me as a subscriber!
I love this truck. It reminds me of my childhood. Both my uncles always had lifted square bodys
The best intro to any good video always starts with “oh shit” lol
@jh diesel and 4x4 bro if you want the best out of those kc lights get another so you have 6 and make it where you have 2 sideways 2 backwards and 2 frontwards. That is the best setup for offroding because at night you will be able to see 360 all around you no problems no blind spots and so on. Great job on the rebuild
jh do one of those full crawler exo cages on that bad boy!!!
Old school fit you and the mullet perfectly nice love the look 😎
looks great. nice job.
FIRE FIRE MAN ON 🔥🔥🔥🔥🔥🚒
Not the nitpick your work there Justin it should have been a double bar go straight down into the bed and then the down bars should have went back up onto the fender Wells that would have looked like an old school Chevy from the Fall Guy!
Great vid brother
Bro digging the square body especially like you said old school build with the kc lights is badass
Lights shirt on fire 🔥 lol then continued to stand in front of all the sparks good stuff 😆
Time for a JH Diesel shirt with FIRE on it ;)
truck looks SWEET!
I did custom exhaust for about 5 years. Got very acquainted with one of those machines. Also wadded up plenty of pipe learning to do shit backwards, and sometimes certain bends have to come first. Looks damn good man
Just a thought, flame retardant shirts might sell....id buy one.
Loving the old roll bar
Definitely like the 80s ,can’t go wrong with the KC lights looking good 👍
Nice I’ve always love the look of kc lights
Great content thanks for sharing
Awesome truck, good job on the roll bar, but please clean the leaves out of that bed! Its been killing me since you bought the truck! Thanks man, keep the vids coming ;)
Just like the snorkel, to much heat🤣poor t shirt 🔥
Fabric softener makes clothes more flammable. Just a tip for your work clothes.
Can't beat a old square body man. Looking good
Im 28 my dad had all these trucks fuck i miss drivin in these rigs ! Great job man !!!! I wish
Truck looks so rad
Love the old school square
Love the square body!!!!! To top it off it needs a cab visor!!!!!!
Killing it bad ass truck I want one now
Truck looks sick.
Fire shirt...EPIC! Laughed through the first 5 minutes and then a replay. Need to ad that tagline to every shirt. "Shirt may catch fire. JH shirts are not fire retardant."
More build videos like this 🍻👌
Looks badass! 🇺🇸 💪
The most calm I have ever seen a person on Fire lol...
Hey man, you might want to check that cord out...it was in a steady stream of sparks too....love that truck, brother!
I graduated in 1988 my old farm truck looked like that, i wish i still had that truck and probably would if i didn't get run off the road and filp it 4x
great job thank you
Man when you caught on fire I could not help but laugh because I have been there more than once before 😂👍
That thing looks sweet. Id love to make something like that for my rig just need access to a bender.
JH merch is fire
Love it JH!!!! Looks fucking awesome!!
I didn`t know it before now, I need a preburned JH t-shirt!
Time for JH Fire shirt!
Great job at the FF event!
You definitely need a shirt in your merch line that says caution extremely flammable
Shop fires be winning this year, Pudn, Peg, now JH..
I've been there before. Burned a few shirts. That's why I don't stand in line with the grinder anymore. Also I love the look. Did something similar to my '88 F-150. I went with the drip-rail clamp style mount like the old patrol cars and department trucks used instead. I still want to be able to install a camper shell and some point.
The roll bar is suppose to mount to the floor of the bed not the bedside.
It's exhaust tubing. It's not a roll bar it's a light bar. That thing is pasta if the truck rolls.
@@jasonbirch1182 was it stainless steel?
honestly i think it would look dope if you let it get a little patina to it then clear coat it with the raw metal patina look
“Well guys im back, my shirt caught on fire, shouldnt happen again” 😂😂😂😂💀
🤣😂🤣👍🏻 it happens t's love go up in flame's 👍🏻👍🏻 old school hell yeah
Your shirt caught on fire due to the outward pressure from that belly. I da best JH D!
Nice job
I’m getting the “Varsity Blues” billy bob vibe from this truck
So glad you okay.....but laughed so f#%king hard
I like the idea, but I would gone with the loop going down the floor, and standing over the cab.
But then again for a project that didn't work out I got roof lights that came off a newer jeep.
80’s style I love it now you just have to add 8 shocks per wheel for the truest 80’s style lol
Hell ya thing is sick just need to get that exhaust back under it
love the merch only got a finish your lift kit shirt even though seen like 4 squatted trucks here in mn
I'd love to swing by the shop and finally clean out the bed of that truck if you don't mind. Great work though as usual.
Reminds me of the Walker Texas Ranger Ram ...but Florida man style
JH Diesel grinding aprons
Ahahahah your shirt on fire. At least you noticed it quickly aha