The Magnets on Shaft and the Outer insulating Magnets does not need to be in equal numbers, they just need to be in even numbers as , 2 , 6 , 8 etc. , Pin me
Balanced and unbalanced equilibrium [Torque on a current carrying coil in a Magnetic field] Balanced when in even number. Unbalanced when in odd numbers@@AbhaySingh-yr3di
Hatsoff to ur interest and patience, i am in research field and i suggest u choose a proper research career path, u will be an asset to nation. Jst Don't let it die like a hobby.. as i find u creative and innovative.
मैंने ये वीडियो पूरा देखा शुरू से अंत तक 👌🏼👌🏼👍🏼 मैं भी अंत में वही कहने वाला था कि बड़ी बड़ी मोटर मैं भी स्टेटर ओर coil के बीच 1-2 mm का ही gap होता है 😊 पर आपकी बताई तकनीक में थोड़ा सुधार करके हम जैसे बढ़िया बना लेंगे 😃👍🏼👍🏼 good job done by you bro 👍🏼👍🏼
Dear Hobbiest of scìence:I appreciate your care and interest in buying costly MAGNES THANKS I do share it to.my friends for your honest attempt to bring out Scientific difficulty too
Bro from Bangladesh... I am big fan of your...i am a student that's why i can't buy chipset and other electronics product... You give me inspiration...keep going i always you... And i also trust you give us always right video... If you see my comment... Plz reply me...
Bhai agle video main please 1 remote control banao jo drone ko control karta hai please or jiski range jyada se jyada ho saath main 1 bldc motor bhi jo same drone motor ka kaam kare live uda kar dikahao please request hai aapse 🙏🙏🙏
BLDC मोटर मे स्टेटर और रोटर के बीच एक पोल का अंतर रखना आवश्यक होता है। यहां सीमित स्थान मे मै इसका कारण विस्तार पूर्वक नही समझा सकता। आपने रोटर मे जो 8 मैगनेट लगाऐ हैं, वे उपरोक्त मूल सिद्धांत के विपरीत हैं। अगर आप रोटर मे 7 मैगनेट लगा दें, तो आपकी मोटर पूरी दक्षता (इफीशियंसी) से काम करेगी व यह अपने आप घूमना भी प्रारंभ कर देगी। अगर आप सभी स्टेटर पोल की पहले वाइंडिंग करके फिर उन्हे स्टेटर बॉडी के अंदर चिपका देते तो वह आसान कार्य होता।
I completely give up with my Arduino drone because when i arm it ,, my all motor start defarent speed,i do everything esc calibration another coding but i can't success,,,,,, than i realised my esc was not have microcontroller , than i changed my esc and now my Arduino drone successfully flying well 😊❤❤❤ ,,,, its very stable flying 😃
Sir mere arduino nano me blink code to proper work kar raha hai lekin jab me normal dc motor ke saat chala raha hu to vo motor work nahi kar rahi hai par arduino simulator me to vo code perfect work kar raha hai (motor thek hai arduino ke + and - se check keya😢
Sir or laptop se blink code dala tha lekin phone me ye error a raha hai name.antonsmirnov.android.uploader.UploadService$a.run(UploadService.java:9) Error: Can't initialize MCU. Consider switching to Avrdude uploader (⋮ / Settings / App settings / Uploader) or follow troubleshooting (⋮ / Help / Troubleshooting)
To avoid magneting locking of stator and rotor🙌
Correct 👍
@@TheDCMinds🎉
❤
But still you got some magnetic locking 😅
@@TheDCMinds❤
This is not fake this is real very nice
India needs guys like you .... Godbless ❤
Bhai apka mahanat ka liya ak like ❤
Dhanyawad Bhai
@@TheDCMinds
Bhai is Dc motor mai neodiyam magnet ki jagah sirf Aluminum metal ka rotar use kare to work krengea kya.
The Magnets on Shaft and the Outer insulating Magnets does not need to be in equal numbers, they just need to be in even numbers as , 2 , 6 , 8 etc. , Pin me
yes but the main question you need to answer is why 2,6,8?
Balanced and unbalanced equilibrium [Torque on a current carrying coil in a Magnetic field]
Balanced when in even number.
Unbalanced when in odd numbers@@AbhaySingh-yr3di
@@AbhaySingh-yr3di north, south poles
@@hithishin2513 still incorrect you need to tell about magnetic locking
Very nice your B L D C Motor project practical experience many many thanks 👍🎉
Thank you
What solution have you used to stick?
@@shubhambakare1642feviquick
bhaie ac dc cercid fen say chal sakta hai buhat maza aaya
बहुत ही बढ़िया प्रोजेक्ट बनाया है आपने, ये युवाओं को सीखने में बेहद मदद करेगा ।
आप ऐसे ही वीडियो प्रोजेक्ट बनाते रहिए ।
बहुत बहुत शुभकामनाएं ।
आपने विडियो बनाया गया है
और मोटर बनाने केलिए बहुत बहुत धन्यवाद और बधाई देते हैं
Hatsoff to ur interest and patience, i am in research field and i suggest u choose a proper research career path, u will be an asset to nation. Jst Don't let it die like a hobby.. as i find u creative and innovative.
I have never received such a wonderful comment in my RUclips career. Thank you very much for your incredibly kind words.
Bohot badhiya bhai.khrab hone pe v thik kr k tumne usko pura kiya great salute brother 🎉
बहुत अच्छा लगा.धन्यवाद.मोटर को लगनेवाली सामग्री की लिस्ट मै सुनांना चाहता हुं.
this takes patience and knowledge. great work
मैंने ये वीडियो पूरा देखा शुरू से अंत तक 👌🏼👌🏼👍🏼 मैं भी अंत में वही कहने वाला था कि बड़ी बड़ी मोटर मैं भी स्टेटर ओर coil के बीच 1-2 mm का ही gap होता है 😊 पर आपकी बताई तकनीक में थोड़ा सुधार करके हम जैसे बढ़िया बना लेंगे 😃👍🏼👍🏼 good job done by you bro 👍🏼👍🏼
Bhai plz bldc motor ka ESC bnao...only delta connection wali motor ka
You are very brilliant i like your project
Thank you so much 😀
Is it possible to reduce power consumption in split AC by using BLDC motor based compressor
shandaar project hai bro . but aisi motor bana kar dikhaiyee jo perminent basis par banayi jasake ghar main or . us se kam lia jasake .. Thanks !
Wow it's sounds like a supercar 😂❤❤👏👏👏
It should be smooth start not dhakka start. Try running the motor without esc controller, using alternate circuit with y winding
I love how stable the Shaft is...........good project
You are a GENIUS man. MAAN LIYA.
You can't use 6 magnets because your stator is 6 pole.
You have to use 2 more magnets/ 2 less magnets to avoid magnetic locking of the rotor.
Correct answer 👍
Aapko 4 magnet hi Lagane chahie the jisse aapko starting Mein Hath se ghumana nahin Padta
Mene ye 7 th std me banaya tha
But wo simple dc motor tha
हर कोई ठीक है लेकिन चुंबक की संख्या विषम है।
Everyone is fine but the number of magnet is odd.❤❤❤❤
Very good informational video.❤❤❤❤❤from bangladesh
bhai agar statot magnet se dur hai toh bhai magnet ke shaft ko masking tape se aur thoda bada karde pura fir se banane se toh yeh bohat aasan hoga
How can I increase my motor torque. At high amount dc motor
Thank you for sharing your wisdom with us
Verry nice bro
Thank you Bro🙏
Very interesting for young ones;explains the exact construction & working of motors.
Excellent creativity,keep it up.I like it very much.
AK like to Banta hai❤❤❤
As an EEE engineer i assure that this process must work.Thnaks❤
*make a 10 kms range drone using Lora module*
Amazing brother ❤ 😊
This is called creativity🥰👍🏻👍🏻👍🏻 keep it bro...
I think 4 magnets are suitable for 6 core motor.
Thank you so much 😀
@@TheDCMinds and have a try with star connection also🥰 i expect better performance
bro it easy to buy brushless motor than trying your method .....!😀😀😀
Yup
@@maarijkhan8864 support me plz
The use of 8 magnets helps the motor to work smoothly and to increase RPM and also increases its efficiency
Nice video
Thanks
The sound❤️
Nice try bro.
In delta mode starting time need more power supplying and later it will take low level power consum.
Waw waw❤❤❤❤🎉🎉
Flysky ka transmitter or receiver buy karne keliye soch raha hun usme programing karna padh ta hai?
Nahi isme programing nahi karna padta but aap chaho to firmware update kar sakte ho computer se👍
Thanks Bhai Mai Drone me 180 motor use kar raha hun Usme Aapka Homemade Transmitter or receiver banaya hai maine Wo kitna Height Par Udsakta hai
Dear Hobbiest of scìence:I appreciate your care and interest in buying costly MAGNES THANKS I do share it to.my friends for your honest attempt to bring out Scientific difficulty too
this thing is known ass creativity....😍
Bhai apka ye video bahoot achchha laga,
Valo baniyecho ...
Nice video. Just tell, which glue you are using for fixing?
Please the brand which I can get in India.
Thanks your for such a nice innovative video
Hi bro nice work but can increasing the size and number of turns increases the rpm and torque??
Bhai ek powerful high pressure car washer banana sikhao na 😊
Bro from Bangladesh... I am big fan of your...i am a student that's why i can't buy chipset and other electronics product... You give me inspiration...keep going i always you... And i also trust you give us always right video... If you see my comment... Plz reply me...
you should increase numbers of white tap to distance between magnet
Bro apki video pahelibar dekha bahut achha laga.
Excellent video! This is what youtube is for.
Bhai aise hi 4 motors bna ke drone banao na full desi
Ha yahi plan hai don't worry 💥💥
Arduino flight controller se brushed drone banao ( same consept se )
Jarur 👍
bhai isme bond tide ka istamal karna
Aap IND se ho to like kare
This work super and developing generator💐
Very good motor for replication for cars thank
Can I use 775 dc motor fan
propeller with it
Ekdam mast
Pahilandya samjale moter kashi kam karte
Dhanyvad
Bhai agle video main please 1 remote control banao jo drone ko control karta hai please or jiski range jyada se jyada ho saath main 1 bldc motor bhi jo same drone motor ka kaam kare live uda kar dikahao please request hai aapse 🙏🙏🙏
Drone ke liye remote control pahle se hi banaya hai bhai 👍
Very nice video thank you ❤️❤️❤️
Thanks for visiting
ek bldc motor kitna heat hota hai usk uper videeo banao
bhai servo tester bina ghumaye motor start kar sakta hai kya
BLDC मोटर मे स्टेटर और रोटर के बीच एक पोल का अंतर रखना आवश्यक होता है। यहां सीमित स्थान मे मै इसका कारण विस्तार पूर्वक नही समझा सकता।
आपने रोटर मे जो 8 मैगनेट लगाऐ हैं, वे उपरोक्त मूल सिद्धांत के विपरीत हैं। अगर आप रोटर मे 7 मैगनेट लगा दें, तो आपकी मोटर पूरी दक्षता (इफीशियंसी) से काम करेगी व यह अपने आप घूमना भी प्रारंभ कर देगी।
अगर आप सभी स्टेटर पोल की पहले वाइंडिंग करके फिर उन्हे स्टेटर बॉडी के अंदर चिपका देते तो वह आसान कार्य होता।
घर में काम आ सकें ऐसा मेज़ पंखा , दीवार पंखा या छत पंखा की wiring डिटेल्स
Bhai please three face Ke esc banana sikhayo
Bhai , next video me is he project ka successor banao 🤝
Amezing ideas bro 👍
Glad you like them!
Due to absence of hall sensor there is problem in starting of motor otherwise everything fine good work
Nice video, thanks :)
YOU SHOULD REPAIAR IT PERFECT AND MAKE A VIDEO THANK YOU ,
Batane ka tarika bahut accha hai aapka bhai
I completely give up with my Arduino drone because when i arm it ,, my all motor start defarent speed,i do everything esc calibration another coding but i can't success,,,,,, than i realised my esc was not have microcontroller , than i changed my esc and now my Arduino drone successfully flying well 😊❤❤❤ ,,,, its very stable flying 😃
you have built the motor very nice
....but it should self start ...you are rotating it with hands ...
any solution for this
I have told its reason and solution at the end of the video, watch the complete video.
Bhai stabilizer wending ka video banao
Faltou o sensor de efeito hall, ainda não como funcionou!!!!!1
Amazing. First time in my life❤❤❤❤ love from kashmir
भाई चद्दर काटने की कोई जरूरत नहीं है स्टेपलर का कांटी इस्तेमाल किया जाए 👍🏻👍🏻👍🏻
Good Idea 👍
Kya aap stepper motor bana skte hain .?
@The Dc Minds Bro please make a fpv camera under 2000 or 3000 please
Your project is perfect and genuine. Congratulations.
I may like to watch your other EE engg related videos.
God bless you
Thanks and welcome
Theek se kam kar rahe hain aur medium theek se lagaye hain aur acche rahte hain aur theek thak rahte hain
अरे भाई साहब ऐसा मोटर एक बना कि हमारे लिए भेज दोगे कितने पैसे का खर्चा आएगा जल्दी से अब बता दीजिए कितने पैसे में यह मोटर हमको मिल जाएगी
Sir mere arduino nano me blink code to proper work kar raha hai lekin jab me normal dc motor ke saat chala raha hu to vo motor work nahi kar rahi hai par arduino simulator me to vo code perfect work kar raha hai (motor thek hai arduino ke + and - se check keya😢
Sir or laptop se blink code dala tha lekin phone me ye error a raha hai
name.antonsmirnov.android.uploader.UploadService$a.run(UploadService.java:9)
Error: Can't initialize MCU.
Consider switching to Avrdude uploader (⋮ / Settings / App settings / Uploader) or follow troubleshooting (⋮ / Help / Troubleshooting)
Motor driver me problem ho sakta hai
@@TheDCMindsBhai new video kyu nhi aarahi
Sob theke Kom khorochey drone toyrir podhoti ki achey are ki motor use korajabe
Can we choose rotor pole as an odd number like 7 or 5 to avoid locking
No
Nice brother,I am interested your video please teach me to make a dc brushless motor 5kv,7kv
Three face ki motor mein ek kuntal lagakar isko single face per bhi check karne❤❤❤❤❤
The sound was amazing great work bro
Glad you liked it
Lekin bhia bahut acha bana ya hai aapne ❤
Volt pavr badane ke liye ❤
Kharab ceiling fan ko 12v bldc motor banaa sakte hain cycle me lagane k liye🤔🤔
Bhai ye magnet ki seereege 6 magnate se sahi nahi ban rahi isliye aap ne 8 magnet 🧲 liye hai
Sir aap kis phone ke camera se video shoot karte ho
Torque Kam hai kya isliye hatse gomana padta hai
I only understood about 10,words,but that was an impressive tutorial
Uska golai ka jitna Mota hoga utna hi magnet lagega bhai
Bhai aap ne polytechnic kia h kya electric se
very nice good job bro try in next video i will wait ❤