Do you mean with or without the shedding device? For pieces with wire warp, I always use the No Warp-Ends Kit (shown here) which cannot be used with the shedding device. Generally speaking, it really just depends on the project/how I feel. I enjoy weaving more with the shedding device, but set-up takes longer.
How do you finish the ends of the threads on the beaded item when you have used the “S” shaped ends to warp around. They leave a gap between thread end loop and the beads?
Once you remove the piece from the loom, the tension is released and there should be just enough room for the beads to spread out a bit to fill those spaces. You can find the full tutorial for this project here: mirrixlooms.com/pages/the-pink-lily-wire-bead-bracelet
How do you decide whether to use this technique vs. one where the thread is woven below one warp then above the next?
Do you mean with or without the shedding device? For pieces with wire warp, I always use the No Warp-Ends Kit (shown here) which cannot be used with the shedding device. Generally speaking, it really just depends on the project/how I feel. I enjoy weaving more with the shedding device, but set-up takes longer.
No shed places one thread between beads, shedding uses two threads between beads.
How do you finish the ends of the threads on the beaded item when you have used the “S” shaped ends to warp around. They leave a gap between thread end loop and the beads?
Once you remove the piece from the loom, the tension is released and there should be just enough room for the beads to spread out a bit to fill those spaces. You can find the full tutorial for this project here: mirrixlooms.com/pages/the-pink-lily-wire-bead-bracelet
@@mirrixtapestryandbeadlooms thankyou so much
Which thread size of the main and waver thread are yoj using .if you don't mind ❤❤❤❤
@@mirrixtapestryandbeadlooms
@@EmilyRoane This was C-Lon Size D