Это видео недоступно.
Сожалеем об этом.
Installation and Testing Trailer Tray For Camper - Stromberg Generator
HTML-код
- Опубликовано: 7 авг 2024
- Stromberg Carlson CC-255 Trailer Tray A Frame Cargo and Generator Holder is installed step by step and tested with a Generac GP3300i generator at the end. We test the 15,000 BTU AC and lights with the generator which are well within operating range. This rack can be used on and off road, the generator can be kept on while driving if mounted properly. Keep in mind the generator and tray will add approx 80 pounds to 175 pounds to your tongue weight.
Affiliate Links -
amzn.to/45XXBMx - Stromberg Carlson Trailer Tray for camper and RV
amzn.to/43Xn8U8 - Generac GP3300i Generator 3,300 Watt
amzn.to/43SnXh4 - RV Proane Cover for Dual 20 Pound Tanks
Installed and tested on GeoPro 15TB Camper with Generac Generator
👉Buy a PC from us! - pcbros.tech/👈
👉 Follow us on Twitter - goo.gl/Bj50Bo 👈
👉 Follow us on Instagram - bit.ly/2SCUg05 👈
👉 Discord Community / discord 👈
👉 Subscribe to us on Floatplane - bit.ly/3kkYg1k 👈
👉 Shop on Amazon - amzn.to/2bVnOEe 👈
👉 Twitch Stream - bit.ly/1Nq1lsW 👈
00:00 Introduction
00:45 Checking Parts
01:40 Install bottom Tube Holders
03:16 Install tray plates on the tray
04:38 Install top tube holders to plates on tray
06:18 Loosely test fit the tray
07:28 Install tall T bracket - Use L bracket for top
08:15 Install bottom portion of T bracket with long bolts
09:26 Tighten everything
10:27 Test with generator
Thanks for the video! I just ordered this stand to mount a mini split on. I’m sure this will help a bunch.
Thanks, this will save me some time 🤜🏻🤛
That's a nice clear video. What did you end up doing to secure the generator?
Good video
Put a rubber matt under it and the vibration should be minimal
I have an idea, what if you just set it on the ground when you need it and put it on the back of your truck when you don't. Hmmmm