Super amazing work! One suggestion though, when poring a large amount of epoxy resin at once the mass of resin tends to overheat and crack, which is probably why your egg got so hot and started foaming out of the top as well. To help mitigate this you can pour the resin in smaller layers waiting a while for each to cure most of the way and then pouring the next layer. Alternatively you can use a polyester resin which can be poured in larger quantities with less catalyst. Hope this helps! Love your work.
was gonna suggest this as well! instead of in layers from the bottom to the top. you could pour some resin in the hole, rotate it around so it can coat all the sides and let that cure. repeat with more resin until its thick enough (or full)
Kid: “why is there a dude in the woods acting like a chicken and throwing around giant eggs?” Parent: “oh, that’s just Bobby at it again, he’s making a video.”
I don’t sub to a lot of art channels cuz it’s not really my thing, but I have to say I absolutely love the humorous twist you add to the videos. You definitely earned another sub. Edit: 1 Unsubbed from t series 2 fixed definitely 3 thanks for the likes and hear
For anyone curious about the heating of the resin, When you mix the resin and The hardener together new chemical bonds begin to form causing an exothermic reaction. Energy is released in the form of heat as the mixture catalyzes. ... So the higher the ambient air temperature and volume of epoxy used; directly corresponds to the amount of heat generated, hence why when he put a ton in, the effects were more dramatic. For the curious minds out there!
@@GeethaShreeN the larger tables usually use a 2:1 ratio epoxy and even with a deep pour epoxy they try to limit to pouring 2-3 inches each pour to stop this kind of reaction. Kind of a bad idea to pour that thick and on top of cardboard...fires are rare but it's not impossible.
Same. I kept going "This would look way better if you had pressure potted it and killed the air bubbles" but they added so much awesome texture to it that it looked like an under water world inside the egg.
Fun fact: Eggs go have holes all over the egg. We can’t notice them if we don’t look hard enough . Those hole are there to help the little babe inside to breath.
Bobby Duke seems like the guy who went to college and did really good in art majors and could be a major artist, but decided to become a fun dad teaching art
I’ve been thinking that ever since I first saw this video but I never thought anyone else would make the connection! The only thing Bobby is missing is the “Staring. Motivating” part
Bobby Duke Arts It’s channels like this on RUclips that I wish there were more of... your unique style has always made me laugh and your artwork is incredible. Love the videos, all the best! Charlie
Bob Ross: I don't have a crazy brother Bobby: You do now Edit: Hi, it's me from 11 months after I commented this. This isn't an original idea but I did format it differently, so I didn't steal it :) tis just inspired
Next time, when you're pouring your resin, if you're pouring it into a large space like an ostrich egg instead of a small mold that's only two or three inches deep, do it in installments. If you do it all at once into a large area it gets too hot and will start steaming and bubbling over and cracking the egg like it did. Next time do three or four pours and let each layer set completely. It takes more time but it will prevent the cracking and the resin won't start seeping through the egg like it did. Also, if you put it in a vacuum chamber, it will remove the bubbles from the resin. I like the bubbled look in this particular piece, it reminds me of an alien egg about to hatch, but just for future reference, if you want it to look more like glass, put it in a pressure pot.
Some other things he could've done: 1) Mix more calmly. Rough mixing whips in air into the resin. 2) Use (low shrinkage) polyester instead of epoxy. It's cheaper, better suited for large casts, and can be less exothermic than epoxy. Vinylester could be okay as well. Anyway, the project turned out beautifully. The bubbles synergized perfectly with his design.
Some points about your advice: 1) He doesn't have to wait for each course to set completely. Doing so will highlight pour lines. Pouring at the soft gel state should be okay. 2) Vacuum chambers cause multipart resins to boil over, especially if you add stuff to it or have as many bubbles as his mix did. You lower the ambient vapor pressure, resin mixture starts to boil because of the lower boiling point. Subjecting the project to a pressure chamber alone will clarify the resin (if it doesn't crack the egg first).
While correct all the bubbles would sit at the top of each pour instead of uniformly distributed. Even vacuuming it is probably hard to get rid of them all, and in this case they are probably wanted. I am thinking keep it rotating while curing with several pours. Then the top surface of the intermediate pours will not be visible from an edge.
The other thing that might work to get rid of bubbles without a vacuum chamber (at least it works with silicone) would be to pour a very thin stream from high up in order to let the trapped gases escape on the way down.
Beautiful! I love that you didnt threw it away after the first crack and just went on with it. In the End i think it looks even more interesting with the crack in the resin!
Well he couldn't really give up on the egg because ostrich eggs are expensive and he would have to get another one and wait a while, so why waste your time and money on one single crack
It seems like every video you make now is overflowing with hilarious and beautiful creativity, kind of like that egg with resin hahah you are a genius and i love how the sponsored parts were in really random locations haha
5:54 I see you are a man of culture as well Wow first time one of my comments got so much recognition thx and a special thx for boby love your videos keep doing what your doing (I can't believe I actually got pinned)
@@Elijah0406 It would be 21M as in 21 meters. That would make it 21 meters of subscribers. An average human is 5.4 feet, which is 1.64592 meters, If there are 21 meters, there would be 12.7588218139 subscribers, but since there can't be pieces of people, we can round that to 13. So all of you are wrong, he has 13 subscribers.
Ostrich: god can you give me bigger egg God: so you can have better protection and have better chance at survival? Ostrich:yesssssss Ostrich:*actually becomes a lamp epicly*
Pewdiepie saw the letter you send to youtube and i was happy when he mentioned you and put your channle on his screen that was lit🔥🔥🔥🔥🔥 THIS SHOULD HAVE BEEN THE MOST LIKED EGG ON INSTAGRAM .
I'm thinking, make another one, using neon green coloured resin, cut to look like the egg from the Alien poster....now that would be REALLY cool. Great work as always Bobby, you sir are an artisan! Happy 2019!
As a carver myself of Ostrich, Rhea & Emu eggs... I've found you don't need the resin at all, just a focused opaque lighting source... but it does lend to an interesting effect! Kudos!
I wanna why such an amazing channel feels like its underrated...he is so inspiring with those weirdly annoyingly funny talks and such beautiful creative arts..
Hi bobby I like what you did with the outrage egg I have a challenge For can you make a night in shining armor out of wood please and thank you so much p.s. I would love a video like and so would everyone else.
Your final piece looks amazing. I'm glad you were able to make the most of the situation and work around the crack that formed. Just as a suggestion if you find yourself working with Glaze Coat brand epoxy again pop it in the microwave on defrost for anywhere from 30 seconds to 2 minutes at a time depending on how much resin mix you're insta-curing. Yeah, that's right insta-cure. running your mix on a defrost cycle will force out all of your bubbles and also provides the added benefit of accelerating the dehydration of your mix which in turn is what cures it immediately. The space created by the bubbles expanding while your mix began to overheat was probably the culprit that cracked your egg. now the mix becoming that hot to begin with i can only surmise may have been a combination of your set lighting and the eggshell's chemical composition or it may also be that the egg was glazed by your source as a preservation method and that's sometimes done with sodium silicate which may or may not have catalyzed a volatile reaction. All purely conjecture from a non-professional, non-chemistry passing, high school dropout with an interest in epoxy and way too much time on my hands. Keep up the awesome videos, as a fresh subscriber I look forward to enjoying more of your content. stay fresh my dude.
PewDiePie shouted you out in his last LWIAY I've known about you for a while i just thought it was dope that pewds shouted you out luv ya keep up the good work
I’m pissed at pewds. He didn’t even mention that you put a “this side up” sticker on the back of the dislike button, which is arguably the funniest shit I have ever seen in a long time. And this is proof that pewds doesn’t watch longer clips that what he is given on LWIAY, because if he had watched your whole vid, like 15 seconds later, he would have seen you slap that boy on there. I do not believe pewds is a fucking racist. I’ve been subbed to him for a long time now, and he did an oopsie. I do think it’s wrong of him to use the n-word, and I was super disheartened as a long time fan of his. I won’t accept the argument that he shouted out a pro-nazi channel either, because he politely apologized for that and explained he didn’t do an extensive search of the persons content, I’m talking like 2 years ago that dude made a vile vid with anti Semitic rhetoric and pewds didn’t promote that vid, he promoted one about Death Note. Also I’m not saying his fans aren’t fucking stupid and horrible, because some of them are and that’s why I stay off the reddit thread. I think he and Marzia have a beautiful relationship and theoy both are incredible content creators together.
@@abee1624 to be fair regarding the not watching more content than what is just on lwiay, he may well want to but the time constraint to put together a video daily plus cover all the content needed would make it difficult. I too think it would have been nice if he mentioned the "this side up" part, maybe he did watch it after the video was uploaded.
This video is amazing, but I would like to address something else amazing: Dukey made it into a Pewds video. I would like to say congratulations to Dukey and to us Lil Dukeys. We’ve done our part. 👏🏼👏🏼👏🏼
Considering they used Ostrich eggs in Jurassic Park's raptor hatching scene... this means you've made DINOSAUR EGG ART! AND it's freaking AWESOME! Love it!
Hey, Bobby I don’t know if you still read the comments on these older videos, but I just wanna say that I love your videos and I’m inspired constantly. Even as I watch you become a chicken-man, there is so much love and happiness in these videos. It’s been a dark couple of weeks and seeing the happiness and inspiration in which you make these videos and these pieces of art is pretty great. Much love❤️❤️
In 200 years... Person: my great great grandfather made this... what is it? Antiques guy: well it seems to be a combination of resin and an ostrich egg... Person: but why?... Antiques guy: well, as that famous guy once quoted... “when life gives you an ostrich egg with a crack , you turn it into some cool art.” this is the work of a genius... Ps happy 2019 people!🥳
There is a thermal reaction happening there. The more it cures, the hotter it gets and the hotter it gets, the faster it cures. It's a self-feeding cycle there. You can slow it down to prevent cracking and allow it to settle better without cracking the egg if you chill the egg while it sets. It's also a good idea to shut off heat sources, like those lights. It's probably why the egg got so hot, those lights were heating it up and making it cure faster! Also, the resin gets thermal cracks when it cures too fast. It would probably also reduce resin sweating since there won't be as much internal pressure building up due to inconsistent cure rates in the depth. A longer cure time would allow it to continue pushing out the top. Btw, love all the bubbles in the resin! It makes it look even cooler. Fyi, mixing it really vigorously gives you the bubbles. I watch a resin turner that uses his power drill to stir and he has bubbles like there's no tomorrow! Super cool design, great effect and I'm glad the resin issues and cracking did not ruin the project.
You should get a vacuum chamber to get rid of the air bubbles Like so he can see this Or I will like this myself lol Edit: I didn’t think that I would get this much likes I’m glad I liked it myself at the first place lol
yes, thats a good idea in general but i think the air bubbles in this kind of project look even better than without em, its glowing because of the light and those little bubbles inside the carvings look amazing because of the bubbles
Absolutely beautiful! I used to carve 3 D pumpkins in the 90's. Wish I was younger without lung problems. We have an Ostrich & Emu egg we got from a friend in GA that was a farmer. I don't have steady enough hands now. You are so impressive
Ok that's it! I have to pick a slower target to beat! You making interesting videos doesn't help me beat your sub count
ElectroBOOM madman
make vids babe
Third
lol yeah... he just got a shoutout from pewdiepie!
Love you sir
bobby duke arts is like bob ross crazy brother
All that is left is a dna test
kid Wolfe OMG YEAH!!!!😂😂
RIP Bob Ross
That describes Bobby too well
@MainaTube Production might be his secret son that he kept hidden
Super amazing work! One suggestion though, when poring a large amount of epoxy resin at once the mass of resin tends to overheat and crack, which is probably why your egg got so hot and started foaming out of the top as well. To help mitigate this you can pour the resin in smaller layers waiting a while for each to cure most of the way and then pouring the next layer. Alternatively you can use a polyester resin which can be poured in larger quantities with less catalyst. Hope this helps! Love your work.
rotate the egg while curing, it could be hollow with 1/4inch resin on inside walls, then you could put lights inside egg. use glow in the dark pigment
was gonna suggest this as well! instead of in layers from the bottom to the top. you could pour some resin in the hole, rotate it around so it can coat all the sides and let that cure. repeat with more resin until its thick enough (or full)
Good job, Bobby. The bubbles added an extra cool effect in the final glowing product.
Marvel might be calling you next for prop design...
Rip Stan Lee
@@Mr_Snek He was a great man ;C
The Thanos Egg
Kid: “why is there a dude in the woods acting like a chicken and throwing around giant eggs?”
Parent: “oh, that’s just Bobby at it again, he’s making a video.”
Kid : can i be like him?
Parent : one day..
Kid : one day what?
Parent : You can't be like him
Lmao 😂
XD
That one neighbor that everyone likes
Why does that feel accurate
This is not an art channel.This channel is art
wow my life is a lie
mind blowing
A masterpiece
Amen to that
art is this channel
YOU
I don’t sub to a lot of art channels cuz it’s not really my thing, but I have to say I absolutely love the humorous twist you add to the videos. You definitely earned another sub.
Edit: 1 Unsubbed from t series
2 fixed definitely
3 thanks for the likes and hear
Defiantly lol
Defiantly you score in English
mega dab
Yeah you're subbed to bobby, but, UN-SUB FROM T-SERIES YOU IDIOT, YOU ARE NOT ALLOWED IN THIS SOCIETY
@OneGoogleUser his defiance of the social stigma caused the original commentor to be inspired by him.
As a citizen of the faraway lands known as "Rest of the world", I would like to thank you for adding the temperature in ºC.
Lol
I agree
Yesssssss.
Hhehehhehe I get it Sucks to be someone who lives in the "Rest of the world" HehHEEH
Lmao I'm from there too!
For anyone curious about the heating of the resin, When you mix the resin and The hardener together new chemical bonds begin to form causing an exothermic reaction. Energy is released in the form of heat as the mixture catalyzes. ... So the higher the ambient air temperature and volume of epoxy used; directly corresponds to the amount of heat generated, hence why when he put a ton in, the effects were more dramatic.
For the curious minds out there!
Ah, thank you for that!
Nice, thanks
Who are you how are you so wise in the ways of science
so what about those big ass tables they make? is it because the mixture composition is different? I guess he should have poured little by little
@@GeethaShreeN the larger tables usually use a 2:1 ratio epoxy and even with a deep pour epoxy they try to limit to pouring 2-3 inches each pour to stop this kind of reaction. Kind of a bad idea to pour that thick and on top of cardboard...fires are rare but it's not impossible.
I have always skipped the sponsors But this guy....It's different with this guy. He is just too entertaining.
He draws better on an egg than I draw on paper.
Same
Than*
666 LIKES
Better than I imagine myself drawing on paper... Sometimes I wish I had a talent that was not pure imagination:)
Bobby: *is perfectly capable of buying a good-sized light fixture and strong glue*
Bobby: No, I don't think i will.
Wynnie Jockimo Is that an Endgame reference I hear?
@@alligaytor4253 dont worry. *these are confusing times* .
King Nikolas 😂 yes. I forget what line comes after that, I may have to rewatch it again lol
This man should work on sci-fi movie props
You know, I thought that this would be worse off for the crack and the bubbles, but I think it turned out well, actually. Better for it.
Same
Same. I kept going "This would look way better if you had pressure potted it and killed the air bubbles" but they added so much awesome texture to it that it looked like an under water world inside the egg.
I love the bubbles in it. It let's the light bounce more.
"yo, where'd you get the egg?"
Him: "I made it myself"
"What"
I mean he did 😂
Fun fact:
Eggs go have holes all over the egg. We can’t notice them if we don’t look hard enough . Those hole are there to help the little babe inside to breath.
Whoa
That is cool isn't it I heard this in a RUclips video about chicken eggs.that was mind blowing
I legit didnt know that
You learn something new every day 🦀
@@LonelyLlamaz Wow bro so funny
I thought eggs had a air sac
Bobby Duke seems like the guy who went to college and did really good in art majors and could be a major artist, but decided to become a fun dad teaching art
That’s one *HELL* of a way to start 2019
You really have my favourite sense of humor. I LOVE how random your ad placement and locations are. NEVER stop being your true you!
I loved the yoda sea gulls
paranoiaprincess you sound like my year 2 teacher
On the roof haha
I want you as my friend.
@@griffinrat8886 the video it came from is so hilarious too. Bad Lip Reading videos make me laugh so hard.
Ngl the crack gives it character. It really gets the feel of an ancient artifact down on point. 10/10
I agree! The crack gives it a super cool texture. Almost makes me wish it had cracked a little more. Almost. 10/10 indeed.
Also makes it 10x more fragile...
You think his neighbors are just like “oh don’t mind duke...he’s artsy”
Bobby's mom: Hey Bobby, what are you going to be when you grow up?
Bobby: yes
*slowy claps*
👌👌👌😬😤😬😭😨👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏😿🙇🛀😨😧😦😭😃😂
XD
Me all the time
.......*clap*.......
The reason the resin did that is an exothermic reaction and it happens when you pour too much at the same time. Hope this helps dude!
Which is why it is advised to pour in sections.
Your pfp doe
Cool!!!^^
Would mild refrigeration have helped? Although now I know about pouring in sections…
Me: I hope he bought the(right) kind that doesn't heat up and expan-
Me: no, no, he did not.
8:00 this reminds me of Cloudy with a chance of meatballs when flint is making the FLDSMDFR
I LAUGHED SO MUCH I ALMOST CHOKED AT THAT PART
YES FINALLY SOMEONE NOTICED THE REFERENCE
Oh yeh so tru
I’ve been thinking that ever since I first saw this video but I never thought anyone else would make the connection! The only thing Bobby is missing is the “Staring. Motivating” part
Cheese burger
Bobby Duke Arts
It’s channels like this on RUclips that I wish there were more of... your unique style has always made me laugh and your artwork is incredible. Love the videos, all the best!
Charlie
Bob Ross: I don't have a crazy brother
Bobby: You do now
Edit: Hi, it's me from 11 months after I commented this. This isn't an original idea but I did format it differently, so I didn't steal it :) tis just inspired
bob ross:
get it? because hes dead! HAH
Press F to pay respects to the brother of Bobby
KidtheBilly messed up and edgy, but funny.
KidtheBilly That’s so mean but so funny lmfao XD
Bobby Ross
Next time, when you're pouring your resin, if you're pouring it into a large space like an ostrich egg instead of a small mold that's only two or three inches deep, do it in installments. If you do it all at once into a large area it gets too hot and will start steaming and bubbling over and cracking the egg like it did. Next time do three or four pours and let each layer set completely. It takes more time but it will prevent the cracking and the resin won't start seeping through the egg like it did. Also, if you put it in a vacuum chamber, it will remove the bubbles from the resin. I like the bubbled look in this particular piece, it reminds me of an alien egg about to hatch, but just for future reference, if you want it to look more like glass, put it in a pressure pot.
Some other things he could've done:
1) Mix more calmly. Rough mixing whips in air into the resin.
2) Use (low shrinkage) polyester instead of epoxy. It's cheaper, better suited for large casts, and can be less exothermic than epoxy. Vinylester could be okay as well.
Anyway, the project turned out beautifully. The bubbles synergized perfectly with his design.
Some points about your advice:
1) He doesn't have to wait for each course to set completely. Doing so will highlight pour lines. Pouring at the soft gel state should be okay.
2) Vacuum chambers cause multipart resins to boil over, especially if you add stuff to it or have as many bubbles as his mix did. You lower the ambient vapor pressure, resin mixture starts to boil because of the lower boiling point. Subjecting the project to a pressure chamber alone will clarify the resin (if it doesn't crack the egg first).
Amanda is not wrong on this ^^
While correct all the bubbles would sit at the top of each pour instead of uniformly distributed. Even vacuuming it is probably hard to get rid of them all, and in this case they are probably wanted. I am thinking keep it rotating while curing with several pours. Then the top surface of the intermediate pours will not be visible from an edge.
The other thing that might work to get rid of bubbles without a vacuum chamber (at least it works with silicone) would be to pour a very thin stream from high up in order to let the trapped gases escape on the way down.
me just taking a walk: ahh what a lovely day-
*le sees bobby duke in the nest*
me:... ok then
Beautiful! I love that you didnt threw it away after the first crack and just went on with it. In the End i think it looks even more interesting with the crack in the resin!
Well he couldn't really give up on the egg because ostrich eggs are expensive and he would have to get another one and wait a while, so why waste your time and money on one single crack
*throw
It seems like every video you make now is overflowing with hilarious and beautiful creativity, kind of like that egg with resin hahah you are a genius and i love how the sponsored parts were in really random locations haha
A DIY video
A how I did it video
But wait there's more!
It's a funny video
You’re probably the weirdest content creator on RUclips. And I love it. Wewd.
Then you have never been on youtube
Dont forget we still have HowToBasic.
That just makes him the most unique
Weed i mean wewd
Ravenwolf 1199 WHAAAAT?
Bobby duke’s wife: this is why we can have nice things!
Starts acting like an ostrich, wife goes to him and says, "Stop being an idiot and come home." I am dead...
I feel like there is a moment of "Oh sweet heart... we all know only one of those things is going to happen..."
Bahaha something i would say to my husband
5:54 I see you are a man of culture as well
Wow first time one of my comments got so much recognition thx and a special thx for boby love your videos keep doing what your doing
(I can't believe I actually got pinned)
nightceeta975 underrated
@@eloisanzara237 totally
Heh
nightceeta975 ur gay
bad lip reading!
When you realize it wasnt clickbait
IKR
The egg might be fake
I'm yer second subscriber... O.o js
@@FBI_agent_4859 I'm yer second subscriber, too... O.o
@@lizbitcasado4219 shhesh thnx m8
Fans who visit his house: Is he an artist or a RUclipsr?
Me: He can be more than one...
first sentence: yes
God you get weirder and weirder day after day ..... i love it :D You are the Man !
ItSeemsDark he’s literally so funny lmfao
Am I the only one who noticed he referenced cloudy with a chance of meatballs?
I'm not alone
Angry Gay Rodian yea it was a reference
Yay I’m not the only one
So I’m not the only one?
Also could be Fan boy and chum chum episode where their nemesis contracts wizard pox
Dude you put so much time and effort into your videos you deserve the decimal point taken out of the 2.1 mil subs
Also, like so he can see
William Torrens that would mean 21 subs
5,000 Subscribers With No Videos it would mean 21 million actually you dumbass
He would deserve more than just 21 million in that case
@@SubscribersWithNoVideos-in9jh 21 mill not 21
@@Elijah0406 It would be 21M as in 21 meters. That would make it 21 meters of subscribers. An average human is 5.4 feet, which is 1.64592 meters, If there are 21 meters, there would be 12.7588218139 subscribers, but since there can't be pieces of people, we can round that to 13. So all of you are wrong, he has 13 subscribers.
Ostrich: god can you give me bigger egg
God: so you can have better protection and have better chance at survival?
Ostrich:yesssssss
Ostrich:*actually becomes a lamp epicly*
*_gloving!_*
*_measuring!_*
*_pouring!_*
*_combining!_*
*_mixing!_*
*_pouring!_*
*_painting!_*
*illuminating*
You forgot the scream
Like a different version of “Bop It!™️”
I thinks it's from that scene from "Cloudy with a chance of meatballs" when the guy start doing that food machine lmao
HEATING
Strange how the weirdest people are always the most creative.
bcoz..human made next to god...
Sam Nava keep god out of it
Im weird and read my name lol
Ahh
like who
Pewdiepie saw the letter you send to youtube and i was happy when he mentioned you and put your channle on his screen that was lit🔥🔥🔥🔥🔥
THIS SHOULD HAVE BEEN THE MOST LIKED EGG ON INSTAGRAM .
Stan Lee hey stan, happy newyear!!
How are you still alive Stan
Omg his replying from the dead
I was screamimg of happines
Bobby posted something on his Instagram about that, just in case you didn't know ;)
I love the amount of efforts put is every intro
Looks like an unobtainable item from a game
The Duke's Egg was a mythical object only told in fairy tales
Ikr
or a movie
_Shows epic montage with music_ *_for an egg._*
XD a 'special' egg
No for an epic egg like epic games (BTW I dislike fortnite)
Eggciting.
5:54: "Seagulls (stop it now) Shirt"
My brain: don't do it
me: HMHAHMHMHMHAHMHMHAHMHMHMHA
Oooh ah ah oooh ooh ahah
@@macleventhal1610 Nothin' I could do but yell when these birds attacked me.
Absolutely love that😂
I'm thinking, make another one, using neon green coloured resin, cut to look like the egg from the Alien poster....now that would be REALLY cool. Great work as always Bobby, you sir are an artisan! Happy 2019!
Skkggfsa yessss
I highly suspect this dude behind that Instagram Egg...
GMP Studios have you ever SEEN HowToBasic?
@@theamazingsmiley9785 Yah. Who said this guy isn't behind HowToBasic too?
GMP Studios *you make a good point*
LOOOOL
Im dead
As a carver myself of Ostrich, Rhea & Emu eggs... I've found you don't need the resin at all, just a focused opaque lighting source... but it does lend to an interesting effect!
Kudos!
M JK Good luck amigo!🌺❤️
Is it possible to pour several thin layer before finally filling it in?
This guy is so good at making and carving stuff that I keep thinking the thumbnails are clickbait.
Thumbnails… lol I thought you were referring to his actual fingernails. He bites them you know.
That display of the egg at the end was an amazing sequence!!!
Can you make a sculpture of Stan Lee out of clay
Ye he should do that that would be cool
Do it out of polymer clay
KeatsQRST ClayClaim has already done that
Late Birthday present huh
I agree
This egg should have the most Instagram likes
lol true
Yessssssss
OMggg😂
You know Bobby likes his creation when he plays sick music while it spins in the dark.
*the video starts*
Me: okay, seems normal
*man starts actiing like a bird*
Me: "okay kids, this is why you dont do drugs"
Nina James LMAO
Exactly
LoL
She iaps not a lamo
Correction: “ok kids this why you don’t do youtube”
YOU GOT ON A PEWDS VIDEO!!! proud of you bro.
Aira yeah which one ☝🏻
Link plez?
dont shit
One step closer to meme 👏 review 👏
His lway (last week I asked you)
"There are no accidents"
-Master Oogway
😲😲 I thought you died!!!
Voltage MSM/POKÉMON I am in the spirit realm
@@mouavang2768 dope. So you can sit on your phone forever? I can't wait to die 😂
Thank you Master Oogway.
Hey daddy
" when life gives you an ostrich egg with a crack in it, you turn it into art." Bobby Duke 2018
My first video of his was the one with the bucket sculpture that fell and broke
Bobby: *makes a cloudy with a chance of meatballs reference*
me: *notices* a man of culture I see
Me: notices you made an error in the meme format
Yoda: a man of memes he is
Yes I am not only person who noticed
We are cultured people
I’m glad he’s a Christian
So he doesn’t go to hell. And I’m not kidding because I’m a Christian
the ”thats hot” input is hilarious
“When life gives you a cracked ostrich egg you make it into art.”
Bobby duke
*”When life gives you an ostrich egg with a crack, you turn it into some cool art.”*
I wanna why such an amazing channel feels like its underrated...he is so inspiring with those weirdly annoyingly funny talks and such beautiful creative arts..
That was a graphic opening 😂
Hi bobby I like what you did with the outrage egg I have a challenge
For can you make a night in shining armor out of wood please and thank you so much p.s. I would love a video like and so would everyone else.
It was but it was funny 😂😂
And weird too
Nathan McCarraher lmao
If he made that nest pretty well
That egg looks like something from subnautica
Lol
It does tho 😂
Dude are you hyped for Below Zero? Do you know when the release is?
True
@@cin0x937 I think maybe its coming out October 2019. There will be like early access stuff throughout the year but that's all I know :-)
" when life gave you an egg, you carve it, filled it with resin, and make it glow
I’m pretty sure you fill it with resin before you carve it
Not just a egg an Bobby dukie Ostrich egg
The t-shirt and additional music snippet made my day. I already love your videos, but showing your love for Seagulls (Stop it now)?? Yes.
Ok but this is actually so IMPRESSIVE AND PRETTY LIKE AAHH
Oh my goodness!!! That egg is so beautiful!!! I love watching your creative mind work. And bless your wife for all she puts up with. Lol
That was the weirdest intro I have ever seen in my life.
LittleAnimations bahaha samee
WHAT THE HELL IS ZAT
Diving into the bushes or HONEY I DONT FEEL VERY GOOD and laying an egg
Who takes a walk when they don't feel good? I know I don't... Lol
I love how this guy NEVER clickbaits
Dudeeeee this is Eggcellent buddy.. Happy Days ! Happy New Year 😉💦
Lol! Same to you buddy❤
Booooooooo! You scrambled that joke badly!
Are you sure you want to take is to the eggstreme
you're just being a chicken.
Ya happy New year
Your final piece looks amazing. I'm glad you were able to make the most of the situation and work around the crack that formed. Just as a suggestion if you find yourself working with Glaze Coat brand epoxy again pop it in the microwave on defrost for anywhere from 30 seconds to 2 minutes at a time depending on how much resin mix you're insta-curing. Yeah, that's right insta-cure. running your mix on a defrost cycle will force out all of your bubbles and also provides the added benefit of accelerating the dehydration of your mix which in turn is what cures it immediately. The space created by the bubbles expanding while your mix began to overheat was probably the culprit that cracked your egg. now the mix becoming that hot to begin with i can only surmise may have been a combination of your set lighting and the eggshell's chemical composition or it may also be that the egg was glazed by your source as a preservation method and that's sometimes done with sodium silicate which may or may not have catalyzed a volatile reaction. All purely conjecture from a non-professional, non-chemistry passing, high school dropout with an interest in epoxy and way too much time on my hands. Keep up the awesome videos, as a fresh subscriber I look forward to enjoying more of your content. stay fresh my dude.
Kitchen remedies
This tip sounds really clever but has one major flaw. The bubbles that got stuck inside actually look extra cool!
PewDiePie shouted you out in his last LWIAY
I've known about you for a while i just thought it was dope that pewds shouted you out
luv ya keep up the good work
@Mister Physics wait what
@Mister Physics you can't fool me, Vox
I’m pissed at pewds. He didn’t even mention that you put a “this side up” sticker on the back of the dislike button, which is arguably the funniest shit I have ever seen in a long time. And this is proof that pewds doesn’t watch longer clips that what he is given on LWIAY, because if he had watched your whole vid, like 15 seconds later, he would have seen you slap that boy on there.
I do not believe pewds is a fucking racist. I’ve been subbed to him for a long time now, and he did an oopsie. I do think it’s wrong of him to use the n-word, and I was super disheartened as a long time fan of his. I won’t accept the argument that he shouted out a pro-nazi channel either, because he politely apologized for that and explained he didn’t do an extensive search of the persons content, I’m talking like 2 years ago that dude made a vile vid with anti Semitic rhetoric and pewds didn’t promote that vid, he promoted one about Death Note.
Also I’m not saying his fans aren’t fucking stupid and horrible, because some of them are and that’s why I stay off the reddit thread. I think he and Marzia have a beautiful relationship and theoy both are incredible content creators together.
@@abee1624 totally agree, if I could retweet I would
@@abee1624 to be fair regarding the not watching more content than what is just on lwiay, he may well want to but the time constraint to put together a video daily plus cover all the content needed would make it difficult. I too think it would have been nice if he mentioned the "this side up" part, maybe he did watch it after the video was uploaded.
Im having the worst day in a decade and this is making me smile in this dark place im in. Thanks Bobby for helping me with your art.
Hes gonna look at his breakfast one day and make something out of it
Hmmmm
Mini knife out of pancakes
Hmmm
Piggy bank out of bacon
Hmmmm
Spear out of eggs
Hmmm
PewDiePie 50 million sub button out of teaspoons
Well I mean he just did something out of a raw non-prepared breakfast so...
When life gives you eggs, make an omelette.
Unless you’re an incredible carver, then do your thing.
This video is amazing, but I would like to address something else amazing: Dukey made it into a Pewds video. I would like to say congratulations to Dukey and to us Lil Dukeys. We’ve done our part. 👏🏼👏🏼👏🏼
Dukey is one of the coolest people, I hope that it brings him some subscribers.
Link please
@Julia Kroll his newest one
Prince Of persia it’s called We Broke A World Record!
😂 lol
I'm only 12, but you've inspire me so much to do art more! Thanks so much Bobby!
Best. Intro. Ever. Period
Or not period
Did you JUST assume MY gender
Well, he did call it a cloaca, so i guess not
Neighbor: don't look now honey there he goes.
Bobby: SQuAwWK
Haha
Considering they used Ostrich eggs in Jurassic Park's raptor hatching scene... this means you've made DINOSAUR EGG ART!
AND it's freaking AWESOME! Love it!
birds are dinosaurs anyway
@@user-dk7eq9fc8e SO IS YOUR GRANDMA!!!!
I'll leave now
@@The13thDyreWolf I'll have you know my grandma is a lv. 100 Mafia Boss
@@user-dk7eq9fc8e Wow, she must know how mafia works.
Your video opening had me in tears!! Thanks for not only teaching us but making our days brighter when we need it most!!!
The opening scene is Oscar worthy!
The he he
eh eh ehT
Me: My friend Bobby thinks he’s a chicken.
Them: that’s crazy, why don’t you do something?
Me: well I would, but we need the eggs 🥚
There's no such thing as to weird
What kind of buffalo bill bull shit is this
@@daredirewolf767 what are you a special Ed teacher
@@liamjohnson2690 no I am a youtuber
large baguette I’m not familiar with that… I was thinking Douglas Adams
You were mentioned in PEWDIEPIE's video!!!!!
He said you were awesome....and he was right
which video?
@@mothmads the we made a world record one
Somewhere in the middle of it
@hi hi its not his newest vid, it's the one from yesterday.
Yeah he introduced me to this channel and I'm sooo glad, i love it here
@@ElloLoJo hahahaha glad to have you here enjoy🖤
Hey, Bobby I don’t know if you still read the comments on these older videos, but I just wanna say that I love your videos and I’m inspired constantly. Even as I watch you become a chicken-man, there is so much love and happiness in these videos. It’s been a dark couple of weeks and seeing the happiness and inspiration in which you make these videos and these pieces of art is pretty great. Much love❤️❤️
The beginning of this video was the most entertaining documentary ive ever watched. This should be on national geographic
In 200 years...
Person: my great great grandfather made this... what is it?
Antiques guy: well it seems to be a combination of resin and an ostrich egg...
Person: but why?...
Antiques guy: well, as that famous guy once quoted... “when life gives you an ostrich egg with a crack , you turn it into some cool art.”
this is the work of a genius...
Ps happy 2019 people!🥳
NOW THAT'S A STEAMING HOT RESIN EGG. Very not aesthetic at that point. Looked great at the end though, look forward to seeing it in Moana 2
There is a thermal reaction happening there. The more it cures, the hotter it gets and the hotter it gets, the faster it cures. It's a self-feeding cycle there. You can slow it down to prevent cracking and allow it to settle better without cracking the egg if you chill the egg while it sets. It's also a good idea to shut off heat sources, like those lights. It's probably why the egg got so hot, those lights were heating it up and making it cure faster! Also, the resin gets thermal cracks when it cures too fast.
It would probably also reduce resin sweating since there won't be as much internal pressure building up due to inconsistent cure rates in the depth. A longer cure time would allow it to continue pushing out the top.
Btw, love all the bubbles in the resin! It makes it look even cooler. Fyi, mixing it really vigorously gives you the bubbles. I watch a resin turner that uses his power drill to stir and he has bubbles like there's no tomorrow!
Super cool design, great effect and I'm glad the resin issues and cracking did not ruin the project.
Some local big foot hunter is going to freak when they find that nest
Oh yeah
Dear Bobby,
Can you make the golden snitch from Harry Potter, or maybe a wand?
-A really bored person laying on their couch
Agreed that would make my 2019 start great!
PLEASE MAKE A WAND!
Yes. Please.
YAS
Please do that!
You should get a vacuum chamber to get rid of the air bubbles
Like so he can see this
Or I will like this myself lol
Edit: I didn’t think that I would get this much likes I’m glad I liked it myself at the first place lol
I kind of like the bubbles in that egg :D
@@justanother2433 Me too! Adds a lot to its texture!
JustAnOther lol
yes, thats a good idea in general but i think the air bubbles in this kind of project look even better than without em, its glowing because of the light and those little bubbles inside the carvings look amazing because of the bubbles
Bubbles are cool yo
Absolutely beautiful! I used to carve 3 D pumpkins in the 90's. Wish I was younger without lung problems. We have an Ostrich & Emu egg we got from a friend in GA that was a farmer. I don't have steady enough hands now. You are so impressive
10:05 anyone else saw that smoll creature
wonderful
a fuzzy boi
Awe
Fluffy boy
Yes but wtf was that
'' I don't feel so good ''
- Bobby, Dec 31, 2018.
Death by thanos, Infinity Gauntlet
No its jan 1 2019
@@mrmaxicola Different times zones are a thing
Day 679 of lying about how many days I’ve been doing this to get Bobby’s attention: it’s going well
OMG THANKS FOR THE HEART
@@derpylmao7314 YOU'VE SUCCEEDED
(のwの)
that guinea pig is so cute
@@tangyjenna what
The line at about 10:50 is what made me subscribe. Came for the art, stayed for the craziness!