Total Project Cost in Pak Rupees, Project Completion Date - 15th August 2023 Denting - 10,000 Paintwork - 20,000 Tuning & Mechanical Work - 13,000 Quick Detailing & Finishing - 16,500 Parts - 23,650 Total Cost - 83,150 PKR (Pak Rupees)
2 questions. Why do we open the valve cover and adjust the valves? It doesn't happen anywhere in the world. Why don't we replace the whole part but only replace the boots? When grease is leaked, the metal to metal contact already damages the part and it should be replaced
Answer 1 - There are two types of valve systems, fixed and adjustable. Honda cars have adjustable valves and as per honda they should be checked and adjusted after 40K KM mileage. So we adjusted these. Honda valve clearance is adjusted worldwide. In Most Toyota cars it is not needed. Answer 2 - In suspension joints it's not metal to metal, it has outer metal casing but have a plastic cushion inside where ball moves so if joint is not loose and its boot is torn then it is ideal to replace the boot and regrese it. If joint is loose then it should be replaced. Hope it helps.
I have mentioned project cost as pinned comment it will be visible on top of comment list. Will mention cost in comments in future videos. Thanks! Denting - 10,000 Paintwork - 20,000 Tuning & Mechanical Work - 13,000 Quick Detailing & Finishing - 16,500 Parts - 23,650 Total Cost - 83,150 PKR (Pak Rupees)
Total Project Cost in Pak Rupees, Project Completion Date - 15th August 2023
Denting - 10,000
Paintwork - 20,000
Tuning & Mechanical Work - 13,000
Quick Detailing & Finishing - 16,500
Parts - 23,650
Total Cost - 83,150 PKR (Pak Rupees)
Love you kindly next project jo karay un ki bhi cost kr na 👍
You are more than awesome bro. Keep it up. We find expert people like you, but you are a rare gem.
Your work is full of Quality and detail🙌🙌👍
Thank you!
Thankyou buhat achi videos banatay hain aap bus isi tarhaan banatay rahain 👍👍👍👍👍
Thank you brother!, In Sha Allah
The last best honda city 👏🏼👏🏼🌟
ماشاء اللہ بھائی آپ کام بہت یونیک ہے
Shukriya Bhai!
As always excellent job done 👏
Thank you!
Again awesome work bhai 🎉
Thank you!
Behtreen as always boss❤❤
Thank you!
Mashallah great work bro
Jazak Allah, Thanks!
Marvelous your work is professional brother may Allah bless you with more success ahead ❤ keep going on
Thank you Brother!
👍👍👌👌Superb as always 🤗🤗🤗🤗🤗😊😊😊😊😊
Thank you!
@@ConditionTech welcome Dear 😊 ♥️
MASHA ALLAH NICE WORK ADNAN BHAI LOVE FROM SINDH NAWBSHAH ❤
Jazak Allah, Shukriya Bhai!
First Comment. I was Waiting for the new video.
Keep the Good word up 🔧👍
Thank you!
Best in Pakistan 🇵🇰 🥇
Thank you!
Mashallah bhai❤❤❤❤
Great Work Done, Masha Allah!
Seems like the car belongs to a lady driver 😅
Thank you, Rightly guessed! 👍🏼
Great work ❤
Well done 👍.
Thank you!
Please upload Corolla altis 1.6 sr restoration project
Yes please
Stil waiting for that video
Lancer project is in editing, Corolla project will be uploaded after that IA.
Amazing
Thanks
2 questions. Why do we open the valve cover and adjust the valves? It doesn't happen anywhere in the world.
Why don't we replace the whole part but only replace the boots? When grease is leaked, the metal to metal contact already damages the part and it should be replaced
Answer 1 - There are two types of valve systems, fixed and adjustable. Honda cars have adjustable valves and as per honda they should be checked and adjusted after 40K KM mileage. So we adjusted these. Honda valve clearance is adjusted worldwide. In Most Toyota cars it is not needed.
Answer 2 - In suspension joints it's not metal to metal, it has outer metal casing but have a plastic cushion inside where ball moves so if joint is not loose and its boot is torn then it is ideal to replace the boot and regrese it. If joint is loose then it should be replaced.
Hope it helps.
Please make video on how to clean catalatical converter
If you also mention its total cost, its more good.
Always good job.
I have mentioned project cost as pinned comment it will be visible on top of comment list. Will mention cost in comments in future videos. Thanks!
Denting - 10,000
Paintwork - 20,000
Tuning & Mechanical Work - 13,000
Quick Detailing & Finishing - 16,500
Parts - 23,650
Total Cost - 83,150 PKR (Pak Rupees)
Why didn't you clean the intake ? That's mandatory part of tunning . Moroever catalytic converter wasn't checked ?
15:43 bakray transport 😂😂
🙂
Please mention price are you used new parts in every vehicle
Prices are changing so fast that's why we don't mention it. We use best option with mix of new and few kabli parts.
Hum kahan pr aakr apni gadi aapsai theek krwa sakte hain?
Plz mention coat also
Denting - 10,000
Paintwork - 20,000
Tuning & Mechanical Work - 13,000
Quick Detailing & Finishing - 16,500
Parts - 23,650
Total Cost - 83,150 PKR (Pak Rupees)
4 months old recorded
Location
Bahi phone number pls or city??
excellent work boss
Thank you!