[Problem Solved] Fandelier 36" install. How to hang Chandelier with invisible/hidden fan blades
HTML-код
- Опубликовано: 31 янв 2022
- In this video I take you through the installation steps for hanging a "Fandelier" combination chandelier and fan. This particular model has a hidden blade ceiling fan. The fan blades only reveal themselves once the fan is turned on. Otherwise it looks just like a chandelier.
Product link:
www.wayfair.com/lighting/pdp/...
Similar Products:
This one is 42"
amzn.to/38Uyjpk
Instagram:
/ ericostrom_problemsolved
Twitter:
@EOProblemSolved
Patreon Link:
/ problemsolved Хобби
Thank you SO very much for this video, and I really appreciate the fact that you humbly chose not to edit out the error, because we can only learn from it. This was very helpful, and well-done, although I will say that I’m sure your wife wouldn’t have been very happy seeing the bit of that impact drill so close to the leather cushion of the sofa. 😂 Thanks again! 👍🏽
Lucky, I didn't damage it! Lol
What was the model number and make the unit you installed I think it's the same one I was looking at on Wayfair?
Thanks for the great video ! Instructions that came with the fan/light are awful but you cleared it up thanks again.
This video was really cool and detailed.. This was our first electrical project and glad that we are almost through! Thanks a lot! :)
great video. i loved that you did it wrong the first time (i was wondering) and left it in and discussed the right way of doing it.
Your video was extremely helpful to my husband. The directions are awful and incomplete. Install was time consuming, we believe your video saved us additional aggravation and time. Thanks!
Thank you for this video. I just purchased this fan a couple of days ago, and I'm putting it up soon. VERY informative!
Awesome! You were so patient. Thank you for sharing.
Thank you for this video! The instructions I received were not very helpful and you helped lots!!
Great video! Thank you and I’m feeling empowered to install myself.
Excellent video. Thank you 😊
Very HelpFul, Gracias Mi Amigo 🙏🏾
Great, video. Thank you so much!
Nice work eric
Thanks 👍
You are doing good job thank-you
Great video!! Thanks
Thanks for sharing your experience. Good video. 👍
I haven’t put my golf balls (😛) on yet, but I’m going to tie the pin ends together if they are long enough. They have the tensile strength of melting butter.
Thank you for the detailed video. I installed a low profile flush mounted fan with remote. I was so exited when i finished cuz it was a pain lol. Well, it is not working so i have to try again, instructions really suck, doesnt say anything about the parts etc. Im gonna try again and take it down and see if i can figure it out. This is my 2nd install, first one was a light fixtureand I totally respect electricity lol. Wish me luck 😅
Good luck! You'll get it
@@ProblemSolvedwithEric if I do I will post it 😊
So, I took it down and discovered that the black wire came off the black wire coming from the ceiling. I attached them back together and TA-TAHHHHHH WE GOT LIFT OFF 🤣. Fan and Light is perfectly working 💪. Thank you again, have a great day 😊
Thanks man!
Did you control this fan with 1 or two switches or just the remote?
I ask because you are right the instructions don’t even talk about switches at all.
If you put a dimmer switch on this light with dimmable bulbs would it work?
So the fan can be dimmed from the supplied remote. I'm not sure how it would work if you wired it up to an existing dimmer switch as that would also reduce power to the fan portion. Our wall switch powers the entire unit and then we use the remote to control the light and the fan. I hope that helps
Excellent, thank you. I have one more wire (red) coming out of the ceiling. What do I do?
Is it a 3 way switch?
Yes, correct
please save me from going crazy here ! you know that green and yellow ground wire connected to the downrod ball? well you connected yuors to a bare copper wire coimg from your ceiling box problem is i don't have any bare copper wire coming out of my box just 2 wires one positive one negative. what do i do ?!?!?!?! do i just not connect the green and yellow wire anywhere??????? plz help trying to install ASAP!!!!! thx.
You can ground it by connecting it to any bare metal. Even to the ceiling box itself if it's not painted
Thank you soooo much. I wouldn't have gotten through it without your help. The instructions that come with the fan light suuuuuuck. You're a lifesaver 😘. Any chance you figured out if the blades can reverse? The instructions (cough) indicate there's a reverse function, but I'm unable to find a switch for it. Thanks again!
I believe the reverse function for ours is on the remote, but I'll have to double-check and let you know when I get a chance
@@ProblemSolvedwithEric Hmmmm. Gotcha. My remote has no reverse option. Appreciate the response.
This fan system cannot be reversed. The blades must rotate in one direction for them to move to their outer positions. Spinning in the opposite direction would not allow them to extend.
Can you tell me what I done wrong? I can't turn my fan off when I just want the light on by itself.
If I remove the wings to clean but what is the easiest way to put them back on
I have this chandelier but made by a different company (AONNTOO) it didn’t have a black box it only came with the white box and I put it together and it worked then the white receiver wire in the white box shorted out and it never came back on. Do you have any suggestions?
Como limpar esse ventilador?
How u get the fan working alone
How strong is the fan? Does it make the room really cool? How much cfm? Here in hAwaii is super hot and we need a strong one haha
It's pretty strong, manual rates it at 2900cfm at max speed
What is the height of the fandelier from the ceiling?
Are there instances of the blades shearing off? I had a similar model but smaller two of the blades sheared off after a few months use
I've had it now for a long time and it's still going strong
How do you change the blade direction? No manual available. Is it with the remote? If so, how?
Press the F/R button
Hey so I installed my fan but when I turn the fan on it shakes a little.
This generally means it wasn't installed level. That being said, there is a rubber grommet that came with the fan that goes where the half ball is. This should reduce shaking
Hi Mine is having a led light turned on even after the light are off , do you face similar issue ?
Indicates a wiring issue or potential defective led bar.
Similar issues light will not turn off with remote only at wall switch unfortunately then fan won't work..ugh
@@joyceplato499 that sounds like a defective led bar. I'd contact the manufacturer for that and get a replacement
Any idea what to do if the light stops working. I have checked and I can hear the click(relay) when I switch it on, but no lights. I need to open the housing where the wires for the lights are. any idea how to do that ?
Did you ever figure it out, we too have the same problem
@@arlenahill1855 any update on this?
What do I do if the fan works but not the lights
If the LED light bar is properly seated, then you'll have to check the wiring above the light. Use a multimeter and make sure all your hots are going to hots and neutrals are neutral. Also make sure connections are solid. I've moved away from using wire nuts now and have been using these
amzn.to/3nOzyed
To bad you can't put most mine up..
Omg, that remote thing won't fit - help
The remote receiver won't fit? It should only go in one way. If you send me a picture on my Instagram I can try to help
Gave up for today, will try again tomorrow, thanks, will send pic
Hi does it wobble at high speed?
No, it doesn't. It's self balancing and has a rubber grommet so it doesn't make noise if it does wobble.
@@ProblemSolvedwithEric are you in new York..
@@terrynash1211 I am not
@@ProblemSolvedwithEric I just got one yesterday . next week it will be here. Thanks to you I can understand what go with what. Here is a question for you.. I have a old light fan - this will take its place. But my wall switch has the light & a round on off for fan next's to the light switch more side by side each one turn on the one you want on, I know its crazy huh. Now the question is you think I should leave it like that?? Or upgrade it - either way if I keep it as is. Then I won't need the remote control. Only dim the light.
@@terrynash1211 completely up to you. I prefer a modern look so if it were me I'd upgrade, but there are benefits to keeping it as is, as well