Woodturning: Coiled Sycamore Bowl

This bowl of sycamore will get a "coiled" decoration with a coil burning tip on a woodburning tool. I also use several texturing tools to add some detail to the bottom of the piece. The bowl is about 9 1/2" (24cm) wide when finished.
Links to items and tools that I frequently use:
**** tools ****
Record Power SC4 chuck: bit.ly/2MADQ5E
SC4\SC3 75mm heavy duty chuck jaws: amzn.to/32FQWFv
Right-angle drill for sanding - Neiko 3/8" Power Drill: amzn.to/35UFJTJ
Plastic center finder: amzn.to/2ogsBra
Elliptical (teardrop) carbide cutter: bit.ly/2p4hy4R
General Tools Moisture Meter: amzn.to/33gn03k
Thompkins thickness-checking tool: bit.ly/33q5ium
Woodpecker's carbon fiber pencil: bit.ly/2WFIN1R
Oregon CS1500 18 in. 15 Amp Self-Sharpening Corded Electric Chainsaw: amzn.to/35ubiCG
Saral Transfer Paper: amzn.to/2H4gPZW
Colwood Cub wood burner: bit.ly/3jXjS47
Woodturning Wonders Inertial Sander: bit.ly/35GC3rb
Faceshield - UVEX Bionic: amzn.to/2WeqRLC
Airshield Pro, powered dust mask/face shield: amzn.to/32EGheh
Woodturner's Apron: amzn.to/2BCVvVi
Starbond CA glue: Direct from Starbond bit.ly/3bybqaA (use code RickTurns at checkout to save 10% on your purchase)
or from Amazon amzn.to/35QZ4VO
**** finishing products ****
Ack's Abrasive Paste, and Polishing Paste: ackswoodpaste....
Mahoney's Walnut Oil Utility Finish: amzn.to/2MyaNRE
Sanding disks: bit.ly/30pajTe
Renaissance Wax Polish , 200 ml: amzn.to/2pROr51
Nitrile gloves: amzn.to/32HG4Hc
Vinyl gloves: amzn.to/2NcbQWC
My sponsor: Record Power - www.recordpower...
My homemade dedicated negative rake scraper: • Make a Dedicated Negat...
My homemade drying box: • A Quick and Cheap Dryi...
My homemade depth gauge: • Make a Bowl Depth Gauge
My homemade giant faceplate: • a really REALLY big fa...
Link to Sam Angelo's video on makeing a depth gauge: • Shop-Made Depth/thickn...
All links to products sold on Amazon are via my Amazon Associates account. As an Amazon Associate, I earn a small commission on qualifying purchases.
The music during the close of the video, "Happy Little Elves" by Audionautix, is licensed under a Creative Commons Attribution license (creativecommon...)
Artist: audionautix.com/
#woodturning#rickturns

[@mpart_woodlathe-stuff]

A real pleasure to watch ! A real pleasure to see a sweet design ! A real pleasure to experience the various embellishments ! 3 for 3 ... a winner in my book👍 Thanks for sharing with us Rick🙏 Stay safe. -Mike😷

[@RickTurnsWoodturning]

Thanks so much, Mike.

[@PhilAndersonShadyAcresWoodshop]

Gotta love gadgets, Rick and I do! So do you! You made great use of all of them. Lots to see in this bowl. I really liked the top edge but all of it's great. Nice job!
Phil

[@RickTurnsWoodturning]

Thanks for your comments, Phil.

[@Sea-Dog5496]

Love the shape of the bowl. It is a real gem.

[@RickTurnsWoodturning]

Thank you, Ed.

[@alanmullock381]

Great bit of turning Rick,with all your camera expertise Hollywood awaits!😜👍👍👍👍👍👍👍👍👍👍😎😎😎😎😎😎

[@RickTurnsWoodturning]

LOL! Thanks for watching, Alan.

[@rayworstine4399]

Interesting personal touches. One of a kind bowl. Very nice!

[@RickTurnsWoodturning]

Thank you, Ray.

[@christianstart560]

The patience to burn that rim is astounding. I would've painted it because I am lazy.

[@RickTurnsWoodturning]

Thanks for watching, Christian.

[@stewynofly]

I really enjoyed watching you turn. The onscreen references and links in the description were great. But your clever camera work and attention to post production “extras” made it a pleasure to view. Thank you for sharing.

[@RickTurnsWoodturning]

Thank you so much for your nice comments, Karl.

[@Roesner65]

Liked your presentation, camera work was different from normally turning videos. I liked it a lot. Looking forward to seeing more presentations.

[@RickTurnsWoodturning]

Thank you, Terry. More videos coming!

[@michelehiggins1878]

Absolutely gorgeous! I appreciate the close up view of your techniques. Thank you!

[@RickTurnsWoodturning]

Thanks for your comments, Michelle!

[@trurex007lee7]

Great embellishments and bowl design.

[@RickTurnsWoodturning]

Thank you, Trurex.

[@mountainviewturning5319]

Great looking bowl

[@RickTurnsWoodturning]

Thanks for watching, Mountain View.

[@ThePapa1947]

Looks great Rick. I like that coil burning tip. Made a very cool looking rim.
Gary

[@RickTurnsWoodturning]

Thank you, Gary.

[@rockinrswoodshop]

Nice job Rick! And glad to see you set up that depth gauge, hadn’t seen it before.

[@RickTurnsWoodturning]

Thank you, Rockin’ R.

[@GordonRock1]

Very cool, Rick. That’s a great looking bowl. 👏👏👏👍👍👍🇨🇦🇨🇦🇨🇦

[@RickTurnsWoodturning]

Thank you, Gord.

[@SilverBack.]

Very well done Rick 👏👏👏👏👏👏

[@RickTurnsWoodturning]

Thank you, Doug.

[@d.bwoodturning9419]

Lovely looking bowl, I like the burning technique 👍👍

[@RickTurnsWoodturning]

Thanks, DB.

[@leksey7870]

A beautiful bowl turned out! Good luck!

[@RickTurnsWoodturning]

Thank you, Aleksey.

[@felocarp]

Loved the burn effect around the rim, Rick. Very nice bowl! Thanks!

[@RickTurnsWoodturning]

Thanks for watching, Greg.

[@IanMacWoodturning]

Great job Rick!

[@RickTurnsWoodturning]

Thank you, Ian.

[@moonwoodworks4607]

Very nice Rick, that's a good looking bowl.

[@RickTurnsWoodturning]

Thanks for watching, Moon.

[@valeriehenschel1590]

Three cameras in one week? Hope you are buying them by the dozen now! Very nice final results.

[@RickTurnsWoodturning]

LOL! Thanks for watching, Valerie.

[@murphymmc]

Nice piece Rick. The rim detail worked well.

[@RickTurnsWoodturning]

Thanks for watching, Murphy.

[@JiggsysShed]

Great work Rick. The detailing looks great

[@RickTurnsWoodturning]

Thank you, Jiggsy.

[@TheTinyWorkshop]

Nice bowl. Great textures did you made. I like that woodburning tool. 🤗

[@RickTurnsWoodturning]

Thank you, Frank.

[@joycemiller6188]

really cool, from certain angels the center texturing looks like a face, the bowl is beautiful

[@RickTurnsWoodturning]

Thank you, Joyce.

[@hbwoodturning17]

Hello rick that is another great bowl that burning of the rim must have taken you a lot of time, but it is worth it looks great. Cheers, Hans
Stay safe and keep turning

[@RickTurnsWoodturning]

Thanks for watching, HB.

[@AllenOxendine]

Nice Piece Rick, thanks for sharing. Full View and Like 👍

[@RickTurnsWoodturning]

Thanks for watching, Allen.

[@copperowlwoodturning5929]

Rick, that was a great video. 👍👍👍 I love the shape of the bowl. and you used lots of tools and gadgets, including new cameras. 😊😊😊

[@RickTurnsWoodturning]

Thank you, Owl.

[@jnol9009]

Great job. Beautiful bowl. Thx for sharing

[@RickTurnsWoodturning]

Thanks for watching, J

[@kimseyjustkimsey5256]

Very Nice looking bowl Rick! Enjoyed the video 👍

[@RickTurnsWoodturning]

Thanks much, Kimsey.

[@carolmccorry3053]

Bloody beautiful Rick......

[@RickTurnsWoodturning]

Thanks much, Carol.

[@TheMessyStudio]

Nice one, Rick. I like that shape!

[@RickTurnsWoodturning]

Thank you, Billy.

[@BAILEYWOODWORKS]

Great finish, nice looking bowl!

[@RickTurnsWoodturning]

Thank you, Bailey.

[@DougMilleratWoodSpunRound]

Nice one Rick.

[@RickTurnsWoodturning]

Thank you, Doug.

[@jcw4101]

Another great video and project.

[@RickTurnsWoodturning]

Thanks for watching, JCW.

[@RayWhitbyCreations]

Painstaking work but worth it in the end! Love the shape of this bowl and the detailing looks great. All the best. Ray

[@RickTurnsWoodturning]

Thank you, Ray.

[@DIMTips]

Love the detailing with soldering iron. Nice job Rick.

[@RickTurnsWoodturning]

Thank you, DIM.

[@PotgieterWoodturning]

Very nice Rick 😁👍🏼👏

[@RickTurnsWoodturning]

Thanks for watching, Jamie.

[@JordanWoodwerx]

Awesome looking bowl buddy!!

[@RickTurnsWoodturning]

Thank you, Jordan.

[@AndysCornishCreations]

Hi Rick...lovely bowl... it needed something to give it a lift and the pyrography work did the trick... I bet that it took a while... lovely shape and finish... another camera lost !!! Haha... great video as always... take care...All the best.....Andy

[@RickTurnsWoodturning]

Thanks for watching and commenting, Andy.

[@jackfitzgerald6927]

Beautiful Job

[@RickTurnsWoodturning]

Thank you., Jack.

[@movingchips]

Nice piece. That burning... wow must have taken awhile. Nice branding logo too. ;)

[@RickTurnsWoodturning]

Thank you, Mike.

[@stuartscott9646]

Nice job!

[@RickTurnsWoodturning]

Thank you, Stuart.

[@NianticRiverWoodcraftingChrisN]

Very nice!

[@RickTurnsWoodturning]

Thank you, Niantic.

[@JOSEGIORDANOwoodturning]

Buen trabajo Rick !!!😀

[@RickTurnsWoodturning]

Thank you, Jose.

[@rickhultman1660]

Nice work RICK!!!!
Ricks always do nice WORK!!!!!! Ha... Miss the jokes -!!!! Ha

[@RickTurnsWoodturning]

Thanks, Rick.

[@ronswoodturningshopandstuf5759]

Except for being 0.00047 degrees off on that spiral cut, THAT was fun to watch!

[@RickTurnsWoodturning]

I hate it when I’m off by that much! Thanks for watching, Ron.

[@donaldkjenstad1129]

Hey, Rick, hope all is well with you and yours ...

[@RickTurnsWoodturning]

Thanks for watching, Donald.

[@LewisKauffman]

I Like It!

[@RickTurnsWoodturning]

Thank you, Lewis.

[@quietinspirationcreations3448]

Third this week...ya gotta stop putting them on the cut line, last time I checked RUclips doesn't pay that well, haha! Great work as always!

[@RickTurnsWoodturning]

LOL!😋 Thanks for watching.

[@williamfawkes8379]

I thought the tree was coiled. That wood burning tip was a good idea.

[@RickTurnsWoodturning]

Thank you, William.

[@DKWalser]

Rick -- I love it!
Question: Did you and Mike Peace coordinate the timing of your videos this week? Very suspicious that both of you showed off your Sorby spiraling and Wagner texturing tools in your videos this week.

[@RickTurnsWoodturning]

Mike’s video and my. Video timing was coincidental. At least in part. I saw Mike’s video earlier in the week, and it reminded me that I had some Wagner texture tools that I had never once used. So I tried one out and it worked great. Thanks for watching, David.

[@vickiejenkinson2468]

I enjoyed your video. I really really love your bowl... but...I'm missing the wood burning pictures with colors 😥. Lol I'll get over it. So, how far did you get on wood burning the edge before you said you should have done just parts of it hahaha. Great job as always Rick. Thanks for sharing your creativity with me again. Stay safe, Vickie (yep, I always talk a lot)

[@RickTurnsWoodturning]

Thanks for your comments, Vickie. My next project is going to have Woodturning and coloring.

[@vickiejenkinson2468]

@@RickTurnsWoodturning yea yea great!

[@chrismarkert7673]

I thought you had to be "Blind" to use the texturing tool.

[@RickTurnsWoodturning]

Thanks for watching, Chris.

[@coswood3454]

Beautiful piece, thanks for sharing 😊

[@RickTurnsWoodturning]

Thanks for watching, Coswood.

[@coswood3454]

@@RickTurnsWoodturning Cheers 😊