He has a helper, his friends call him Vise. Nice work :) thank you for the content. Ignore the critics. They've never lived where you live, or worked on the things you have. In their countries you throw away a car when you get tired of it. Pity them.
I run the car maintenance RUclips channel in Korea. I'm always learning such a great ideas on your channel. I hope we have a chance to be together. Thank you.
tvp79 понравилась также чистка поплавковой камеры и диффузора латунной щёткой. Из камеры продукты очистки вместе с бензином закупорят жиклёры, а расцарапанный диффузор не даст возможность нормально карб настроить, т.к. будет подсос воздуха.
Estimado, en las juntas no se les aplica pegamento ya que forma una película y la bencina la deshace, para eso vienen las juntas hechas llegar y colocar y si no las encuentra las hace con belomoide, se hace la forma de la base y ya hecha utilizas spray negro para altas temperaturas y pintas ambos lados ya cuando se sequen se colocan sin pegamento
You resprayed a broken thermostat housing and refitted it without a thermostat. There was no gasket for the carb between the top and bottom bodies of it. You didn’t take the jets out and clean them. Was the gasket stuff you put on before the home made paper gasket fuel proof. It all looked nice when finished but such a bodge job.
What do you know about mending things in a poorer nation than the one you live in? In many equatorial places a thermostat is useless. A busted hose outlet isn't a big deal if you clamp past the broken part. The car probably doesn't have a heater. Cereal box gaskets are fine even when exposed to fuel. He used sealers between the carb an intake, probably did in other areas too. He may have cleaned the jets. Didn't show the accelerator pump or float seats and needle either. Doesn't mean they were not cleaned. If you dislike it why subscribe or watch? This is someone trying to make a living. They do it the way they do it. Either for themselves or for local customers who gladly pay to have a running car. Share some love and support for someone making it in a life that would crush most people in privileged nations.
@@tiporari You are a dickhead. This cannot be for a customer as it will not last long. You are no mechanic. You dont restore / fix things the way he does. He may be in a 3rd world country, but dont be too stupid to think or suggest they know how to do stuff better than the rest of the world. I subscribed to see what crap he does and also what good stuff he does. Some stuff he restores is useoless after he restores it. Other stiff turns out better than some others. I was a mechanic and used to rebuild engines and cars and I know what needs doing and also how to bodge things, which this was. So get off your high horse and get back to fornicating with your dad. Silly boy.
@@ianallen2 I've seen what mechanics in first world countries do as you say! nothing more than this, even some times far below this. Don't indulge in your fucking ego and run down
He has a helper, his friends call him Vise. Nice work :) thank you for the content. Ignore the critics. They've never lived where you live, or worked on the things you have. In their countries you throw away a car when you get tired of it. Pity them.
that was surprisingly therapeutic to watch. amazing to see what a little clean up and paint can do!!
I literally could watch these videos all day
Exelente travajo saludos desde panamá 💪👏🇵🇦
Love your videos so satisfying to watch the restoration process
Love watching all you're videos very entertaining and learning from them
De acuerdo amigo!
Very very good job! Thanks for the video.
What is an amazing work bro
Another excellent video. True talent and know how. God Bless. And continue making videos.
I like all of your videos. You do a really good job it very entertaining.
Wicket man..love you🖒🖒🖒
muy buen trabajo felicitaciones
Excellent 👍👍👍. Thanks for sharing
I run the car maintenance RUclips channel in Korea. I'm always learning such a great ideas on your channel. I hope we have a chance to be together. Thank you.
뜻밖의 곳에서 발견한 카맨ㄷㄷ
Nice video sir amazing content
machan! sri lankan :)
Buen video , excelente felicitaciones saludos de Ecuador
nice for looking bro. wish you all the best. eu adoro, excelente mano
Saludos de Argentina
Наконец то карб покрасили. Теперь лансер поедет лучше нового)
Ещё и кар щеткой по камерам прошелся, вообще огонь тачка будет! :)
Boa noite aqui do Rio de Janeiro, Brasil 🌷🌷🌷❤
Nice color :)
Great Job
ලංකාවෙ මෙච්චර වැඩ්ඩො ඉද්දි ඇයි අපි බයවෙන්නෙ 😌😌ජපනා අයිං කරාට අපෙ කොල්ලො තාම ඒවට පන දෙනව
අනිවා
Шпатлевка на впуске)) я такого на ютубе еще не видел и наконец покраска карбюратора))
Ну хоть не полернул до блеска😂
@@Looney_YKT если блестит или покрашен +50 к скорости, а то что карб надо регулировать, ремонтировать - не, не слышал
tvp79 понравилась также чистка поплавковой камеры и диффузора латунной щёткой. Из камеры продукты очистки вместе с бензином закупорят жиклёры, а расцарапанный диффузор не даст возможность нормально карб настроить, т.к. будет подсос воздуха.
Muhteşem
Türkiye'den selamlar
No Gloves, Uses old oil, pretty much representing our country mechanics. but they dont restore things like this. good work.
Very good job 👍👍👍👏👏👏👏👏👏👏🌷❤🌷❤🌷❤🌷❤🌷
герметик под карбюратор!)
Nice very good
Is that a Mikuni
for a 4g54 engine? It does like it.
No.1
*Papadakis Racing:* How most car guys want to be building engines.
*Restoration of Everything:* How most car guys actually be building engines.
Краска то хоть термостойкая? Eng: is the paint heat resistant??
Where are you from brother ...
Lancer wagon ekaka carburetors tunings karana widiha danna puluwanda
Estimado, en las juntas no se les aplica pegamento ya que forma una película y la bencina la deshace, para eso vienen las juntas hechas llegar y colocar y si no las encuentra las hace con belomoide, se hace la forma de la base y ya hecha utilizas spray negro para altas temperaturas y pintas ambos lados ya cuando se sequen se colocan sin pegamento
Why was the plate welded to the bottom of the manifold?
Nice work by the way!
If you look at the begining the manifold was already welded. never seen that
@@yeagerxp yeah, i have a similar manifold and ive got some strange 70-80s era emissions or filter stuff. I wish i knew more about it 😂
Bike tank ekak plant kara ganna puluwanda
pls restoration of 1.3-1.5 12 valve carburator engine mitsubishi lancer 92-96
👍👍👍
Impressive work....
G 62 B ?
입구에서 퍼티)) 나는 유튜브에서 그런 것을 보지 못했고 마침내 기화기를 그림으로 만들었습니다))
Bhi AP ka aders Kay haiy maray
o bi car ka Sara engine safe karna haiy pleas send address
Any one know where is this garadge is situated
haha garadge, LOL
Sir work shop enkka eruku
Compré un carburador igual pero me dicen que consume mucha gasolina será verda 5:53
I think heating surfaces should not be painted.
Hello Türkiye İstanbul. Mutsubisi 1600motor 1998 model 2000 motor video
You resprayed a broken thermostat housing and refitted it without a thermostat. There was no gasket for the carb between the top and bottom bodies of it. You didn’t take the jets out and clean them. Was the gasket stuff you put on before the home made paper gasket fuel proof. It all looked nice when finished but such a bodge job.
What do you know about mending things in a poorer nation than the one you live in? In many equatorial places a thermostat is useless. A busted hose outlet isn't a big deal if you clamp past the broken part. The car probably doesn't have a heater. Cereal box gaskets are fine even when exposed to fuel. He used sealers between the carb an intake, probably did in other areas too. He may have cleaned the jets. Didn't show the accelerator pump or float seats and needle either. Doesn't mean they were not cleaned.
If you dislike it why subscribe or watch? This is someone trying to make a living. They do it the way they do it. Either for themselves or for local customers who gladly pay to have a running car. Share some love and support for someone making it in a life that would crush most people in privileged nations.
@@tiporari You are a dickhead. This cannot be for a customer as it will not last long. You are no mechanic. You dont restore / fix things the way he does. He may be in a 3rd world country, but dont be too stupid to think or suggest they know how to do stuff better than the rest of the world. I subscribed to see what crap he does and also what good stuff he does. Some stuff he restores is useoless after he restores it. Other stiff turns out better than some others. I was a mechanic and used to rebuild engines and cars and I know what needs doing and also how to bodge things, which this was. So get off your high horse and get back to fornicating with your dad. Silly boy.
@@ianallen2 I've seen what mechanics in first world countries do as you say! nothing more than this, even some times far below this. Don't indulge in your fucking ego and run down
Buy a vise.
this is not a restoration but a degrease clean up and paint.
Correct. That's what the title says. Plus that's all that needs to be done. It's clean in and out. Probably work fine.
Surely you are not going to use that thermostat housing, you could at least sleeve it, it is rotten!
🇪🇨👍🏻
Dude you not restorating your just buying new parts
РУКАЖОП.....