little tip for future repairs on chips with broken pins, you can get a tiny usb engraving pen and use it to remove some plastic on the edge of the chip next to a broken pin to expose the internal metal leg and solder a wire onto it. ive fixed a lot of things this way
Not gonna lie, Steve, I thought you might give up on this one after seeing how absolutely mangled it was in the first video. The fact you were able to revive it at all is nothing short of a minor miracle. Well done on this one.
seeing the state of those caps makes me somewhat grateful that the first time round i sent my pc engine gt away to be fixed they didn't butcher it anywhere near as badly, they just didn't bother replacing half the caps, in the end i re did the whole job myself and im glad i did!
It’s Alive! Sometimes you gotta work with what you got. RGB screen looks awesome and so glad you sorted it out. Please keep the content coming, mistakes included. The realism is what I love.
@@Mizai It's a very annoying, irritating, issue for sure, when it happens like this, it's something RUclips definitely need to address, and from what i've read, they are well aware of it, but this really isn't the fault of any poster, this is ALL the fault of YT. Of course it wasn't an issue when comments were always a scroll down to the bottom, and then they decided to go with this format. But this irritating issue could easily be resolved by eliminating that single visible comment, with a simple update, making it so, to read any of the comments, you'd have to purposely click on comments. But of course YT are typically slow to act on anything that doesn't involve large amounts of money
I’ll never get bored of the pure joy from you when you get something fixed (equally the confusion as to how the hell it’s working 😂) keep going Steve 👍🏻 Glued components?! Fair play to you for not giving up!
I'm really glad RUclips randomly suggested me your channel. I was big into modding Gameboys for a while, but kind of out of of the electronics repair game. Watching you fix these devices definitely makes me want to get back to it. Great job brining that thing back to life.
@@StezStixFix i have Garmin dezl 780 that wont power on even with new battery replaced. i tried pressing power button for 5sec, 15sec, 30 sec still not working. i also tried pressing power and volume down at same time not working still. GPS micro usb port not taking charge either, i think its defective too. Could you do a similar gps fix that wont power on video?
GET IN THERE!!! I almost fell over when it came on. Great fix Steve, that was intense. They didn't leave you much to go on and you still nailed it, well done!
Thanks Travis! Still shocked that it actually worked! I've been playing on it these past few days and it's a fantastic handheld! The RGB screen is awesome too! 👍
This week on' Tales of the UN-Expected. The viewers are shocked & Steve's! face (Reactions) leave the viewers in tears of joy & laughter. My wife told me pass her lip stick but.. I gave her a glue stick now she is not talking to me. (I'm trying Not! to give the game away) 😂👍🏻
Great fix mate 😂😂your a wizard Harry loved that game in the arcades remember you used to sit down with a joy stick and the machine moved was crazy back in them days 👏👏❤️👍🏻
I laughed at those glued caps. So many people think that just glueing components back in place will fix it. I just fixed a Dualshock 4 controller where they'd tried to change the battery, ripped the battery connector off the board and just glued it back down thinking that'd make it work again.
Impressed you managed to get this working! So many issues and bodges, what a wild job someone did on that thing. As someone who's still learning to fix stuff myself, this stuff is super inspiring.
Ignore my comment in previous video. Excellent work nice bogged together. Your assessment of the video chip correct comp out puts not need for screen mod. Person who did the original mod needs shot. Well done again.😁👍
Great rescue Steve 👍😀. That hot glue can be a pain ... sometimes using a craft knife to put cuts into it or male a dimple in the top can help increase the surface area and time with the IPA in contact improves the softening. Keep up the great work!
Thanks Chris! Great tip! I'm not sure it would have helped with this one, I'm pretty sure those caps were ripped off and then glued back down anyway! 😬
B-Y and R-Y sounds like Pb and Pr from Y, Pb, Pr component. Y is Luma. Pb and Pr are the difference from Luma to generate blue and red. Green is generated from Y algorithmically.
It is a reference to the YCBCR color space. Y is luminance. Cb is blue minus luminance, hence B-Y. Cr is similar. The Pr and Pb you mention is a gamma corrected variant.
If it is a Zener diode, then it only would need two legs, it is quite possible the third pad was purely a support. Not sure how you managed to get it going after such a mess being created by the previous hack, but you did it and it will be a really nice little device.
Sorry it's not much, things are tight at the moment. I know nothing about electronics but for some reason I've been finding your stuff fascinating and relaxing (for me) to watch! Hope one day you get a Sinclair Spectrum or Atari St! All the best, Thanks
You total animal! (not 100% sure this will be seen as a compliment, but it is supposed to be) What a ride, the glued parts cracked me up. Forgot to solder them perhaps. Drugs maybe? hahaha. They need you in the Nasa space station for repairs until they actually get those nano bots that do repairs.
Dude great job! I have watched a few of your videos and I am quite impressed how you use what you got and make it work! I have already learned some things from you. I am trying to grow an electronic repair business at home. Mainly video game, consoles and such. So I decided to subscribe and keep on watching!
Im so glad you made a return to this, i was going to mention on the previous video that so long as you could fix the power circuit it wouldn't be that bad an investment to buy a faulty pc engine basic console and use hot air to swap the HU chip although it looked like youd've had to fix the pads it connected to anyway :)
Thats an excellent job there.always impressed with your perseverance.as a sidenote you can pick up a power cable for this off ebay which allows you to power this from a usb powerbank instead of a million AA batteries a week,although admittedly the lcd upgrade certainly cuts down on battery usage a bit.
Good job !! At some point the RGB board was very hard to find (slightly easier now I think). At least it made the cut legs matter less. The diode might be 2-in1, or both pins being the same, so if it works like that it'll be fine.
Hey Man love your videos. I have a pc engine gt that i recapped. Unfortunately it didn't fix it. i have a "shorted" capacitor pad on cc503. Positive pad is grounded and the ground isnt grounded. Not sure how that happens. Any advice would be appreciated.
Whoever did the original job should not be allowed to touch electronics ever again. Great job repairing this..
little tip for future repairs on chips with broken pins, you can get a tiny usb engraving pen and use it to remove some plastic on the edge of the chip next to a broken pin to expose the internal metal leg and solder a wire onto it. ive fixed a lot of things this way
Commenting to save this amazing tip. Thanks!
Just the tip. Sounds like an option
@@denserdeezsignz5498 that's what she said!!
For more powerful engraving, a dental plaque removal tool would also do the trick!
@@rookie3528 And for even more powerful - jackhammer.
Not gonna lie, Steve, I thought you might give up on this one after seeing how absolutely mangled it was in the first video. The fact you were able to revive it at all is nothing short of a minor miracle. Well done on this one.
seeing the state of those caps makes me somewhat grateful that the first time round i sent my pc engine gt away to be fixed they didn't butcher it anywhere near as badly, they just didn't bother replacing half the caps, in the end i re did the whole job myself and im glad i did!
This one was certainly butchered! I'd be so annoyed if someone did this to one of mine. Good job on fixing yours yourself! 👍
It’s Alive! Sometimes you gotta work with what you got. RGB screen looks awesome and so glad you sorted it out. Please keep the content coming, mistakes included. The realism is what I love.
Thanks Bitdigital! Yeah, the screen looks beautiful, makes a world of difference over the original!
thanks for ruining the ending no point on watching now (yes you were the comment youtube placed in the preview)
@@Mizai It's a very annoying, irritating, issue for sure, when it happens like this, it's something RUclips definitely need to address, and from what i've read, they are well aware of it, but this really isn't the fault of any poster, this is ALL the fault of YT.
Of course it wasn't an issue when comments were always a scroll down to the bottom, and then they decided to go with this format. But this irritating issue could easily be resolved by eliminating that single visible comment, with a simple update, making it so, to read any of the comments, you'd have to purposely click on comments. But of course YT are typically slow to act on anything that doesn't involve large amounts of money
I’ll never get bored of the pure joy from you when you get something fixed (equally the confusion as to how the hell it’s working 😂) keep going Steve 👍🏻
Glued components?! Fair play to you for not giving up!
Hitting us with Peter Gabriel on the Outro was mega! Well done on the repair👍
Quite an achievement to rescue that! Well done.
Thanks Stuart! 👍
The link in the description just takes me back to the beginning of this video.
I'm really glad RUclips randomly suggested me your channel. I was big into modding Gameboys for a while, but kind of out of of the electronics repair game. Watching you fix these devices definitely makes me want to get back to it. Great job brining that thing back to life.
This is great to see. The person who did those things to it should be ashamed of themselves. Glad it landed in your hands and was able to be rescued.
Thanks Terry, really happy to see it back up and running! 👍
Your channel is really making me want to get into the hobby of fixing old consoles
You should do it! It's great fun 👍
@@StezStixFix i have Garmin dezl 780 that wont power on even with new battery replaced. i tried pressing power button for 5sec, 15sec, 30 sec still not working. i also tried pressing power and volume down at same time not working still. GPS micro usb port not taking charge either, i think its defective too. Could you do a similar gps fix that wont power on video?
GET IN THERE!!! I almost fell over when it came on. Great fix Steve, that was intense. They didn't leave you much to go on and you still nailed it, well done!
Thanks Travis! Still shocked that it actually worked! I've been playing on it these past few days and it's a fantastic handheld! The RGB screen is awesome too! 👍
I loved how you kept trying and did your research and whatever. Instant subscribe.
I actually screamed when it booted. Well done you. Well done!
This week on' Tales of the UN-Expected. The viewers are shocked & Steve's! face (Reactions) leave the viewers in tears of joy & laughter.
My wife told me pass her lip stick but.. I gave her a glue stick now she is not talking to me. (I'm trying Not! to give the game away) 😂👍🏻
🤣🤣 brilliant, thanks Steve! 👍
Steve you bring the dead back to life.
I wish I had 1/33 of your skill!
Congratulations on salvaging this beauty!
I cannot believe that this HuC6260 chip, with so many legs missing, ended up working properly. What a save Steven!
You are an absolute LEGEND for getting this mess working again.
Beauty it is with all the comical expressions from you LOL. Don't give up is the moto! Well done Steve. No comments on the singing this time! 🤣
😁 thanks M m!
Holy Crap... I seriously thought this was going to be trashed... I was going to say great job but this deserves a "Damn good Job Steve..."... WOW
Thanks Oz! I was really please (and surprised!!!) to see it come back to life! 😬
It's always a good insight how other techs attempt to repair; Then you come in like god mode and just make the magic happen!
I credit Dave for that 😄
That! Was! Awesome! So gratifying to hear the sound!
Another great fix and video, your face when the screen worked was magic 👍
Thanks David! 👍
Good save. Though the person who tried to do it previously had to start somewhere and might now watch your videos and be learning better techniques.
You probably know it
...all ready ,
What you do in your videos,
Looks pretty
amazing"
That look on your face when it worked, brill. 👍
😁 thanks Sherlock, I was a genuine look of shock! 😳
Great fix mate 😂😂your a wizard Harry loved that game in the arcades remember you used to sit down with a joy stick and the machine moved was crazy back in them days 👏👏❤️👍🏻
Yeah, i remember it well! I'd love to have another go on it in an arcade! 🤩
I laughed at those glued caps. So many people think that just glueing components back in place will fix it. I just fixed a Dualshock 4 controller where they'd tried to change the battery, ripped the battery connector off the board and just glued it back down thinking that'd make it work again.
I've also had them taped down with sticky tape, I'm not sure which is worse! 😬
Great revisit! My son and I just watched both. Glad you got it sorted out (and also glad we waited so we had both of them to watch).
Thanks Matthew, glad you and your son enjoyed it! 👍
Great ending Steve wow you put her back together nice and puurdy!👍
great that you got it fixed and that screen ends up looking much better than the other working one you had
congrats on the save
Oh man, was so excited watching this thing come back to life!! Good work mate!
what a journey 😂 so happy for u when you fixed it
wonderful job Steve
Good to see your revisit on your PC Engine GT there Steve and this time it paid off good work there - Nice 1 mate 👍
Thanks Chris! 😊
I really enjoy your work. Good work on this one.
You are amazing for attempting that cap replacement. ❤️
I enjoy learning about electronics with you Steve, and I want this journey to continue.....but I THINK my sub conscious does it for the tunes x
😁 yes!
Impressed you managed to get this working! So many issues and bodges, what a wild job someone did on that thing. As someone who's still learning to fix stuff myself, this stuff is super inspiring.
Nice one steve another handheld saved from the landfill, lmao @ capacitor bodge some people are just clueless
Thanks Darkshijima 😁 who glues down a couple of ripped off capacitors and expects them to work!? Strange stuff! 😳
7:03 "I wish I knew more things." Me too, brother. Me too...
Excellent, I really did think it was a lost cause..
Thanks MJ, me too. Think I got a bit lucky, but it's working great now! 👍
That was an epic save. Well done.
Magnificent result. Well done!
Thanks Marv! 😊
This was awesome! Nice job and great perseverance
Even though I just watched you do it, I'm actually astounded you managed to get that thing working agin from the state it was in.
poor PCB
Good job Steve, you "saved a life"
Nice going. I'm surprised there wasn't more damage.
Thanks pds. I couldn't see anything else but I also wouldn't be surprised! 😳
@@StezStixFix Well it seems to be all working now. So other than some lifted tracks I don't think there would be anything else damaged.
Amazing. That thing looks like it has been in a war with all the mess inside.
Glad you were able to save it!!
Great video Steve
Thanks Jon! 👍
Thanks for the lesson
Ace, well done, bit of an overdue credit, but what a fix (eventually)
You literally brought this back to life from console hell
Good show mate! Way to stick with it and clean up this catastrophe!
Ignore my comment in previous video. Excellent work nice bogged together. Your assessment of the video chip correct comp out puts not need for screen mod. Person who did the original mod needs shot. Well done again.😁👍
Great rescue Steve 👍😀. That hot glue can be a pain ... sometimes using a craft knife to put cuts into it or male a dimple in the top can help increase the surface area and time with the IPA in contact improves the softening. Keep up the great work!
Thanks Chris! Great tip! I'm not sure it would have helped with this one, I'm pretty sure those caps were ripped off and then glued back down anyway! 😬
Well done Steve, I'm wondering who the hell worked on this before you, Jesus wept!
Thanks Adrian! I know, it is one hell of a bodge job. Makes me feel like a pro! 😁
Awesome channel. From a Wythenshawe ex Para geezer, who hasnt got a Scooby Doo what you`re doing but enjoying it all the same.
Well done Steve yes it was a little messy but it works and with time you will get better who’s a clever man 🤣👍take care 👏👏
B-Y and R-Y sounds like Pb and Pr from Y, Pb, Pr component. Y is Luma. Pb and Pr are the difference from Luma to generate blue and red. Green is generated from Y algorithmically.
Ah, thanks Emmett. That would make sense that it had a composite mod thst was ripped out (taking the legs with it!)
It is a reference to the YCBCR color space. Y is luminance. Cb is blue minus luminance, hence B-Y. Cr is similar. The Pr and Pb you mention is a gamma corrected variant.
Very nice repair! Job well done!
Thank you! 👍
Excellent job
Thanks Alvin! 👍
very nicely done sir.
Thanks WanJockey! 👍👍
If it is a Zener diode, then it only would need two legs, it is quite possible the third pad was purely a support.
Not sure how you managed to get it going after such a mess being created by the previous hack, but you did it and it will be a really nice little device.
'Tis a true miracle! Amazing work :)
😁 definitely a miracle! Thanks Kevin 👍
Sorry it's not much, things are tight at the moment. I know nothing about electronics but for some reason I've been finding your stuff fascinating and relaxing (for me) to watch! Hope one day you get a Sinclair Spectrum or Atari St! All the best, Thanks
Well done sir
Great repair! But I love your endings Lol!
😁😁 thanks Slingshot!
I saw dave tear up with a " I knewwwww he had it in him" congrats
😁 thanks N!
A skilled fixer, you have become! Another very well made video! Like alot!
Thanks Willy, much appreciated! 👍👍
1st class video to watch thank you take care kind regards from me kenneth🤨
Amazing fix, seen a few bad jobs in my life. But that PC Engine is among the worst shit I've seen on RUclips.
Nice work!
Yeah, it's definitely up there and it's certainly the worst I've ever worked on! 😳
You total animal! (not 100% sure this will be seen as a compliment, but it is supposed to be)
What a ride, the glued parts cracked me up. Forgot to solder them perhaps. Drugs maybe? hahaha.
They need you in the Nasa space station for repairs until they actually get those nano bots that do repairs.
Dude great job! I have watched a few of your videos and I am quite impressed how you use what you got and make it work! I have already learned some things from you. I am trying to grow an electronic repair business at home. Mainly video game, consoles and such. So I decided to subscribe and keep on watching!
nice one steve 👍
Glueing components on is a step up from ones that you've encountered that were sellotaped on.
That is very true! 😁
I've pretty much fixed mine now, just going to add a heat sinks to the chips that get super warm, maybe a mini fan.
Cool, sounds like a good plan! 👍
@@StezStixFix Just done it, and left it on for 3 hours, no screen glitches, and it's definitely cooler than it was.
A methodni use to see where traces go is to shine a bright light behind the board
Thanks schweatty! Great tip! 👍
Went to my local church to show the priest this act of god..lol well done mate, great luck you have..
😂 thanks idle! I definitely got a slice of luck with this one!
Great video!
Thanks Matt! 👍
Nice work
Im so glad you made a return to this, i was going to mention on the previous video that so long as you could fix the power circuit it wouldn't be that bad an investment to buy a faulty pc engine basic console and use hot air to swap the HU chip although it looked like youd've had to fix the pads it connected to anyway :)
Thats an excellent job there.always impressed with your perseverance.as a sidenote you can pick up a power cable for this off ebay which allows you to power this from a usb powerbank instead of a million AA batteries a week,although admittedly the lcd upgrade certainly cuts down on battery usage a bit.
I audibly said "What the hell?!?" when you pealed those caps off. Did a monkey work on this before?!? GREAT repair!
Thanks Adam! Glueing down ripped off capacitors is definitely the work of a monkey! 😁
Be cool to show us a library of games for this as I’ve never encountered it like many others
I was here before 5K SUBS! (keep in mind I will use this comment as proof of an og subscriber!)
😁 much appreciated Mer! 👍
Everytime you say Stupid Game I think of Hacker T Dog.. love your videos man
you listened to the boys well Steve, dont you tell me to stop! It pays off :)
Can you give a link to the scratchy pen that you use to scrape the solder mask? :3
Good job !! At some point the RGB board was very hard to find (slightly easier now I think). At least it made the cut legs matter less.
The diode might be 2-in1, or both pins being the same, so if it works like that it'll be fine.
Thanks Ryoandr! Yeah, I've had a quick look for the RGB boards and they are still quite hard to find (in the UK at least!)
Fantastic video, please do a Sega Nomad smd cap upgrade please :)
That thing looks like a UPS signature device 😂😂
i would love to see more turbo express repair videos theres just some allure for a system ill never own lol
your reaction was priceless mate
😁 thanks Rory!
Hey Man love your videos. I have a pc engine gt that i recapped. Unfortunately it didn't fix it. i have a "shorted" capacitor pad on cc503. Positive pad is grounded and the ground isnt grounded. Not sure how that happens. Any advice would be appreciated.