You could always press the small question mark button next to your rotate angle to parameterise that value and the set it through the global parameter tab under tools, but with it set as a global parameter u can set up a design manager study which will give u a sweep through AoA and then export your results to a csv file for further analysis. Great video keep up the good work!
"Unable to read the input .csv file. Please check the format of the file" Do you know how can I solve this problem ?? I repeated the same steps that you showed. Thanks
Hi, I know this video is 3 years old so I don't expect a reply but when I import the csv file nothing shows in the window. A sketch is added to the part tree but nothing is visible. Any advice?
At 15:06 timestamp, the mesh couldn't be done in my case, the warning message appeared "Cannot execute Automated Mesh (2D) Operation, all input parts must be badged for 2D Meshing. The following parts are not badged for 2D Mehing" Body 2 I did it the same after following yours 2 times, still, it couldn't be done. Please help if possible!
This video despite the blank prompts made working with Star CCM very interesting. Thanks the brilliant explanation
You could always press the small question mark button next to your rotate angle to parameterise that value and the set it through the global parameter tab under tools, but with it set as a global parameter u can set up a design manager study which will give u a sweep through AoA and then export your results to a csv file for further analysis. Great video keep up the good work!
you, sir, are an absolute life saver. You have no idea how much this helped me. thank you eternally
"Unable to read the input .csv file. Please check the format of the file" Do you know how can I solve this problem ?? I repeated the same steps that you showed. Thanks
same here, did you solve it in the meantime?
@@binladoo I have the same issue, check on the notepad if the separator is ',' , if not change to it.
Thank you for this tutorial.I hope is not the last one.
Thank you for the video, this is really helpful. Although, my drag is negative!!!? Do you have any suggestions to correct this?
Great video! Very useful to me
Hey there, why did you choose to "reverse" when getting the data from airfoil plotter?
Hi, I know this video is 3 years old so I don't expect a reply but when I import the csv file nothing shows in the window. A sketch is added to the part tree but nothing is visible. Any advice?
I had the same issue, I added 0s in a third column to account for the z axis
At 12:20 he says he gets a red dot next to Body 2 and the surface icons changed, this didn't happen for me. Any ideas?
sorted, make sure your "sym" surfaces are separate lol
@@matthewfarrow1314 confirmed
Thank you a lot🥲
@matthefarrow1314 how do you make them "separate"?
@@anirudhkiran7640Give them different names, like symPlane1 and symPlane2
At 15:06 timestamp, the mesh couldn't be done in my case, the warning message appeared "Cannot execute Automated Mesh (2D) Operation, all input parts must be badged for 2D Meshing. The following parts are not badged for 2D Mehing"
Body 2
I did it the same after following yours 2 times, still, it couldn't be done. Please help if possible!
Did you ever find a solution to this?
Is this 2D simulation or a 3D simulation?
It's 2D. For star-ccm+ you need to start with a 3D geometry, but when you run the simulation you specify a 2D flow