I had been looking for videos explaining the shutter for a while and, until finding this video, had not found anything very clear. this is So didatic....
"less technology" is actually euphemistic for "more simple." that's not to say there's no complexity, but at the same time... explaining how a digital projector functions to this precision would require a much deeper and broader explanation drawn from many more fields and disciplines. depending on how deeply you care about how digital devices work in general, this might include a dip into quantum mechanics, which are very relevant even in systems that rely mostly on classical mechanics. film projectors of that era could be explained intuitively, and understood intuitively. we are in an age where real-world phenomena have counterintuitive explanations, or explanations that are so technical you need education to understand them. it has a lot more to do with the technology itself than it does any way people explained it. i almost hate to say this, but if you can't understand modern explanations, it's probably your fault. this is potentially too blunt, but it is accurate.
@@korwl540I hear ya but I'm not sure if you we're directing that last part directly to me. If so, I didn't say that we couldn't understand modern explanations - just that they explained things better back then... This video was a high level view of how a Cinema Projector works, not technical explanations of how to build one. Never the less, I was just appreciating all the hard work that the creators of this video had to have put in to produce this film (without modern Computers, Software, Technology and ect). We tend to take videos like these for granted -- especially when all we have to do is fire up a PowerPoint with the click of a mouse.
When I was in my tender age I fascinated with films in theater....to understand the technology managed to see movie in oprator cabin.Thereafter , I used to collect the cut piece of the film thrown away behind the cinema hall. I made a card board projector at home and managed to enjoy Home theater using reflected sun light via mirror. I had to change the angle of the mirror with the moving sun.. As soon the sun light moved out, the show is over.
यह सिनेमाघरों में फिल्मों के लिए सुरक्षित है डिजिटल काम फिल्मों के निर्माण के लिए सुरक्षित नहीं है बज़ट फाइनल कॉपी कानूनों के बिना सुरक्षित नहीं है इस तकनीक के लिए सिनेमा कार्यकर्ता और निर्माताओं ने इस तकनीक को अद्यतन करने के लिए दिमाग लगा दिया यह फिल्मों के लिए जीवन रेखा के लिए सबसे अच्छा है
There is no any real cinemas today. They use digital now and that takes away the feeling of the real cinema and the moving pictures. I don´t go to cinemas anymore because of that.
Well said, I would like to represent this feeling as you look to a paper or vinyl artificial flower rather than a real garden one with all its swings, feels and aroma. Although i understand that a person grown up in digital age will hardly appreciate the old school 35 mm motion picture handling in Cinemas due to mindset difference "Analog vs Digital"
sound on film is achieved by sacrificing a little portion on the side of the film frame to fit a sound track (this is also probably where the term "soundtrack" came from) early 35mm films use an optical sound method. on the projector's sound reading area, there's a light bulb (usually called the exciter bulb) that shines light into a little slit. that slit only lets a small ribbon of light to pass through into a photoreceptor/light detecting cell. the sound track is basically going to let a specific amount of light to hit the light detecting cell by blocking the ribbon of light with dark areas. the size of dark areas vary with the volume and frequency of the sound intended to be reproduced, lower volumes have more dark areas and louder volumes have less dark areas. the dark areas also vary much more minutely to produce the specific frequency intended to be reproduced. higher frequencies have the areas vary more frequently and lower frequencies are less frequent. the light that's received by the light sensitive cell is converted into electrical currents, then these currents are greatly amplified and the amplified signal is then fed into the speaker, which reproduces the sound.
Do both reels move all the time? My projector, On fwd the left works on reverse the right works, But are they both supposed to move? I’m waiting for some old film reels in the mail to try my self
The takeup reel is powered and the feed reel is unpowered, with a little bit of drag to keep mild tension on the film. Usually the upper or front spindle holds the feed reel and the lower or rear spindle holds the takeup reel. If you have a projector with both spindle arms on top, and you are facing the right side of the projector where the controls and threading path are, the left reel will be the takeup reel when going forward. If your projector can play in reverse, the feed and takeup reels will reverse roles. When you have played the whole reel of film and let the tail run out the back of the projector (or better, stopped it before the tail leader and unthreaded the projector) you take the end of the film flapping loose on the left (rear) takeup reel, and thread it counter-clockwise around the hub on the right feed reel, putting an inch or so of the film in the notch in the hub for that purpose. Then hold your fingers _lightly_ on the rim of the full reel to provide a little braking, and put the projector into rewind. Keep you hand on or near the reel until the whole reel is rewound. If the film starts getting loose between the reels, apply a little pressure to the rear reel to tighten up the film a bit. If you don't do this and let the film rewind by itself, about half way through the reel the film will get loose, then usually drop off one reel or the other, tangle in the spindle supports, and stretch and break the film. Then you will have to cut a couple of feed of damaged film out of the middle of the show and splice the ends together.
Hi Persephone!!! Περσεφόνη (Persephoni) in Greek!!! I gave the search term: persistence of vision and came up with this!!! ruclips.net/video/YeRbwhfaHfQ/видео.html I hope it helps!!!! Thanks for your interest. Chris
The pictures of upside down first. There is a light bulb behind the film. The film have individual still pictures. In between the steel pictures of film there is a revolving door. The upper gear and lower gear holds the film long enough to see a speck of dust add scratches read more. The film script evolves in a downward position for each picture there is a mirror behind the light bulb. The the length in the front bends the light and it flips it right side up. The source of light for checks and beams onto a wall. A different size film. Make the pictures smaller or bigger the closer is the movie projector the smaller is the pictures. The farther away the bigger is the pictures. Very interested. Comments. View. Story. Notification.
It's worth off safe for movies in cinemas digital workes not safe for producing a movies buzzt final copy are nott safe without laws back this technology incinema worker's and makers swtt tha mind for this technique update this is best for life line for movies
contents from old videos, clips, events
anything related to classic, timeless,
golden years are my faves
i swear.... ...even with less technology back then, they explained things better...
Right?!
I had been looking for videos explaining the shutter for a while and, until finding this video, had not found anything very clear. this is So didatic....
They were actually smarter back then.
"less technology" is actually euphemistic for "more simple." that's not to say there's no complexity, but at the same time... explaining how a digital projector functions to this precision would require a much deeper and broader explanation drawn from many more fields and disciplines. depending on how deeply you care about how digital devices work in general, this might include a dip into quantum mechanics, which are very relevant even in systems that rely mostly on classical mechanics.
film projectors of that era could be explained intuitively, and understood intuitively. we are in an age where real-world phenomena have counterintuitive explanations, or explanations that are so technical you need education to understand them. it has a lot more to do with the technology itself than it does any way people explained it. i almost hate to say this, but if you can't understand modern explanations, it's probably your fault. this is potentially too blunt, but it is accurate.
@@korwl540I hear ya but I'm not sure if you we're directing that last part directly to me. If so, I didn't say that we couldn't understand modern explanations - just that they explained things better back then... This video was a high level view of how a Cinema Projector works, not technical explanations of how to build one. Never the less, I was just appreciating all the hard work that the creators of this video had to have put in to produce this film (without modern Computers, Software, Technology and ect). We tend to take videos like these for granted -- especially when all we have to do is fire up a PowerPoint with the click of a mouse.
We used to watch reel to reel movies at school when I was a kid. Our library also had a card catalog!!!!
"The light passes through the hole or APERUTREEE" Dude has the perfect narrative voice
When I was in my tender age I fascinated with films in theater....to understand the technology managed to see movie in oprator cabin.Thereafter , I used to collect the cut piece of the film thrown away behind the cinema hall. I made a card board projector at home and managed to enjoy Home theater using reflected sun light via mirror. I had to change the angle of the mirror with the moving sun.. As soon the sun light moved out, the show is over.
Seriously. You did fantastic work. Without technology at that time
यह सिनेमाघरों में फिल्मों के लिए सुरक्षित है डिजिटल काम फिल्मों के निर्माण के लिए सुरक्षित नहीं है बज़ट फाइनल कॉपी कानूनों के बिना सुरक्षित नहीं है इस तकनीक के लिए सिनेमा कार्यकर्ता और निर्माताओं ने इस तकनीक को अद्यतन करने के लिए दिमाग लगा दिया यह फिल्मों के लिए जीवन रेखा के लिए सबसे अच्छा है
Great explanatory video! Thanks for sharing!
24 fps print projectors used a bowtie-shaped shutter to flash each frame twice to reduce flicker, so each image is on screen for 1/48th of a second
You know anybody that teaches people to run 35mm?
It's a miracle for me all the time.
why am I seeing this at 4am in the morning.. truly I'm single..😂😂
It's 10 minutes left before it's 3 am here and I'm just curious 🧐 that's why I'm watching it
2:02
Strobe light warning!
This was best explanation I was always thinking how does it work it was for me like mysterious since I was Kid thank you for your video
This looks better than cinemas today
I watched 10 other Videos from the last 2 years, but I understand the content first in this video
There is no any real cinemas today. They use digital now and that takes away the feeling of the real cinema and the moving pictures. I don´t go to cinemas anymore because of that.
Well said, I would like to represent this feeling as you look to a paper or vinyl artificial flower rather than a real garden one with all its swings, feels and aroma. Although i understand that a person grown up in digital age will hardly appreciate the old school 35 mm motion picture handling in Cinemas due to mindset difference "Analog vs Digital"
Nice information 👍🏼👍🏼👍🏼
I love the look of old films :)
Explain how sound will come on old projectors
sound on film is achieved by sacrificing a little portion on the side of the film frame to fit a sound track (this is also probably where the term "soundtrack" came from)
early 35mm films use an optical sound method. on the projector's sound reading area, there's a light bulb (usually called the exciter bulb) that shines light into a little slit. that slit only lets a small ribbon of light to pass through into a photoreceptor/light detecting cell. the sound track is basically going to let a specific amount of light to hit the light detecting cell by blocking the ribbon of light with dark areas. the size of dark areas vary with the volume and frequency of the sound intended to be reproduced, lower volumes have more dark areas and louder volumes have less dark areas. the dark areas also vary much more minutely to produce the specific frequency intended to be reproduced. higher frequencies have the areas vary more frequently and lower frequencies are less frequent. the light that's received by the light sensitive cell is converted into electrical currents, then these currents are greatly amplified and the amplified signal is then fed into the speaker, which reproduces the sound.
Wah.sandar
Sandar.💜
Great video! How do they sync audio for movies with dialogues?
0:43 they had the computer's cursor way back in this year? also is this video from the 1950s
It's just a normal arrow XD
Do both reels move all the time? My projector, On fwd the left works on reverse the right works, But are they both supposed to move? I’m waiting for some old film reels in the mail to try my self
The takeup reel is powered and the feed reel is unpowered, with a little bit of drag to keep mild tension on the film. Usually the upper or front spindle holds the feed reel and the lower or rear spindle holds the takeup reel.
If you have a projector with both spindle arms on top, and you are facing the right side of the projector where the controls and threading path are, the left reel will be the takeup reel when going forward. If your projector can play in reverse, the feed and takeup reels will reverse roles.
When you have played the whole reel of film and let the tail run out the back of the projector (or better, stopped it before the tail leader and unthreaded the projector) you take the end of the film flapping loose on the left (rear) takeup reel, and thread it counter-clockwise around the hub on the right feed reel, putting an inch or so of the film in the notch in the hub for that purpose. Then hold your fingers _lightly_ on the rim of the full reel to provide a little braking, and put the projector into rewind. Keep you hand on or near the reel until the whole reel is rewound. If the film starts getting loose between the reels, apply a little pressure to the rear reel to tighten up the film a bit.
If you don't do this and let the film rewind by itself, about half way through the reel the film will get loose, then usually drop off one reel or the other, tangle in the spindle supports, and stretch and break the film. Then you will have to cut a couple of feed of damaged film out of the middle of the show and splice the ends together.
Great work
Hi can you tell me where you got this footage please? I would like to use it for a film!!
Hi Persephone!!! Περσεφόνη (Persephoni) in Greek!!! I gave the search term: persistence of vision and came up with this!!! ruclips.net/video/YeRbwhfaHfQ/видео.html I hope it helps!!!! Thanks for your interest. Chris
24 frames per second is the minimum speed for a smooth viewing.
Projecter mechanism
amazing. today now laserprojecter
Awesome verybrilliant..
Mükemmel eline emeğine sağlık usta teşekkür ederim
Wow good 👍😍😊
This video explains how we see reality.
Sandar
interesting, I've always wondered how films played
So this is where the term “rewind” comes from
Anyone else tried to replicate this as a kid by placing a film negative of photos in front of a flash light
Gracias, nuevo suscriptor
Very thanks
謝謝😊
I think this was seen from 1956, It’s my best guess.
When did the original video come out?
Around 1936.
2:01 Epilepsy warning!
Bende de sinema makinesi var.makine aksamı ile ilgili her türlü bilgi dikkatimi çekiyor.
i could not watch a movie that flips like that
My mind: *hey I'm making you search for this for some reason* this is very reel.
seeing this in 2023 ❤
and then transistor came into existance.
2:08
What car is this?
The pictures of upside down first. There is a light bulb behind the film. The film have individual still pictures. In between the steel pictures of film there is a revolving door. The upper gear and lower gear holds the film long enough to see a speck of dust add scratches read more. The film script evolves in a downward position for each picture there is a mirror behind the light bulb. The the length in the front bends the light and it flips it right side up. The source of light for checks and beams onto a wall. A different size film. Make the pictures smaller or bigger the closer is the movie projector the smaller is the pictures. The farther away the bigger is the pictures. Very interested. Comments. View. Story. Notification.
Is that clip copyright free?
pretty cool
A natureza é maravilhosa
I came to know about that shutter today.
So simple to make
Is it 60 fps?
Actually, films run at 24 fps, while youtube videos run at an average of 30-60 fps.
Was it in the 50’s to 1966
Wow
🤝🏻
2:00 trigger warning
What??? Acrobatic in a car *(laughs)*
Sir for yoiu know get I need your help Rhonda. Pickett
Jackson kdon, MS
I'll talk to you in a minute
take it out please
It's worth off safe for movies in cinemas digital workes not safe for producing a movies buzzt final copy are nott safe without laws back this technology incinema worker's and makers swtt tha mind for this technique update this is best for life line for movies
Asali..khajana.ye.hei
fascinating don't believe your eyes lol
1:06
this explains god...
My Boyfriend Cuphead
30th
Wah.sandar
Sandar