So glad it was able to help you out! Tried to make it as clear and easy as possible since I've ran into it where you are right there and then you find out you need a different size or tool etc and becomes such a headache. Figured if I can save someone the headaches that ive had to go thru then why not help others out.
This is not a lifehack. Anybody that works on cars can see that if you take the alternator off you would be able to go in there with some extentions. If you don't know that then its best you take it to the shop. You shouldn't be under your car.
My bolt on the underneath stuck I took out the top bolt form under the hood that was actually the easiest bolt to take out but the underneath one seems stuck
Take out the motor mount bolts and the mount has enough room to move out the way and it makes it easier to install the starter. The top bolt was a small pain but if u install the bottom bolt in first without fully tightening it it'll give u wiggle room.
😅🦾😳🤨 💯 great information but I did it with three tools from the top of the motor 3 tools a 10 wrench 12 wrench and a 13 wrench end of story in about 15 to 20 minutes …..😅😅😅 but still very proud of you for one your a female and keep up the good work 🦾🤙🏾💯🦾🦾🦾🦾
One of the clearest instructional videos I've ever seen for car repair-thank you!
So glad it was able to help you out! Tried to make it as clear and easy as possible since I've ran into it where you are right there and then you find out you need a different size or tool etc and becomes such a headache. Figured if I can save someone the headaches that ive had to go thru then why not help others out.
Size 12 = 12mm, Size 13 = 13mm Size 10 =10mm. Great vid! Very helpful!
FYI you can actually reach that top bolt from up top from under the hood… just did it on my 2009 Aveo5… not a bad video though! I found it helpful!
Thank you from Australia….you just saved me so much heartache😊
Glad I could help :)
Thank you so much. You just saved me so much time. Clear instructions with useful info. Thank you again.
Your welcome ;) happy it could help someone else out
Thank you. Just finished mine today and this was a big help.
Awesome, thank you. Every time I spent 2 hours on it... Im going down and check your lifehack :)
This is not a lifehack. Anybody that works on cars can see that if you take the alternator off you would be able to go in there with some extentions. If you don't know that then its best you take it to the shop. You shouldn't be under your car.
This was perfect, thanks!
Ugh. I'm dreading doing this. Thanks for the tips here though.
I had been fighting to get the starter off of my derby car for a looong time and this helped so much!!! Thank you!
Excellent Sonya good video was very helpful
Worked like a charm. Thanks for the video.
Good video. easier to remove intake bracket to get to top bolt. top 2 12 bottom 2 14. other than that good vid
I just see ur 1st video i lile ur funny way 😂😂
Give more fun 😎😎😎
Thank you!!
@@sonyahart8329 ur welcome 😉
You are awesome
very helpful video. thanks
My bolt on the underneath stuck
I took out the top bolt form under the hood that was actually the easiest bolt to take out but the underneath one seems stuck
Take out the motor mount bolts and the mount has enough room to move out the way and it makes it easier to install the starter. The top bolt was a small pain but if u install the bottom bolt in first without fully tightening it it'll give u wiggle room.
Your Awesome great video
Engine bracket removal really is less dodgy than the alternator
Hi Sonya.
Great video! My '010 Aveo starter removal. My channel (maniacal s10 )
Va pas de feu aux demareur
Location of starter relay of aveo?
Will be in the fuse box next to the battery.
I would rather take the bracket off.
😅🦾😳🤨 💯 great information but I did it with three tools from the top of the motor 3 tools a 10 wrench 12 wrench and a 13 wrench end of story in about 15 to 20 minutes …..😅😅😅 but still very proud of you for one your a female and keep up the good work 🦾🤙🏾💯🦾🦾🦾🦾
A Chevy what? Lmao