Robo Soccer Bot using FlySky FS-i6 Transmitter and BTS7960 Motor Driver
HTML-код
- Опубликовано: 6 фев 2025
- Welcome to the 𝐀𝐬𝐥𝐚𝐦 𝐇𝐨𝐬𝐬𝐚𝐢𝐧 RUclips channel!
𝐓𝐢𝐭𝐥𝐞: Robo Soccer Bot using FlySky FS i6 Transmitter and BTS7960 Motor Driver | Without Brushed ESC | Soccer Bot Making using Arduino and FlySky | Soccer Bot using 555 37GB Gear Motor | How to Make Soccer Bot using FlySky | Servo Motor as ESC | ESP32 Soccer Bot | Robo Racing Bot Making | Roborace Robot using Arduino and BTS7960 | Wireless Robot with Flysky fsi6 | Fast Line Follower Robot | Soccer Bot Competition | Best Soccer Bot | BTS7960 with FlySky | DIY Robot Soccer Bot | How to Make Battle Bot | Self Balancing Robot | Soccer Bot Chassis Making | Soccer Bot using Brushed ESC
🤖 Ready to kick it up a notch in the world of robotics? In this tutorial, we'll guide you through building your very own Robo Soccer Bot using the FlySky FS-i6 Transmitter and BTS7960 Motor Driver. What's unique? No need for a Brushed ESC! Follow along step-by-step as we explore the exciting realm of remote-controlled robotics, from assembly to programming. Get ready to score some goals with your personalized, high-tech soccer companion!
🚀 Key Features:
No Brushed ESC is Required.
Responsive Remote Control with FlySky FS-i6.
Precise Motor Control using BTS7960.
Perfect for Beginners and Hobbyists.
𝐂𝐨𝐬𝐭 𝐀𝐧𝐚𝐥𝐲𝐬𝐢𝐬:
1. Motor (1100 TK x 4) = (1100 * 4) / 109.73 ≈ $40.11
(Knock me through Facebook to buy motors at low cost)
/ aslamhossain3852
2. Wheels, L-Mount, Hex Coupler = 2000 TK / 109.73 ≈ $18.23
3. BTS7960 (500 TK x 2) = (500 * 2) / 109.73 ≈ $9.11
4. Servo Motor (150 TK x 2) = (150 * 2) / 109.73 ≈ $2.73
5. Buck Converter (100 TK x 1) = 100 / 109.73 ≈ $0.91
6. Fsi6 Tx Rx = 6000 TK / 109.73 ≈ $54.65
7. Chassis = 2000 TK / 109.73 ≈ $18.23
𝐓𝐨𝐭𝐚𝐥 𝐂𝐨𝐬𝐭 𝐢𝐧 𝐔𝐒𝐃/𝐓𝐊 ≈ $𝟏𝟒𝟒.𝟗𝟕 ≈ 𝟏𝟓𝟗𝟎𝟕 𝐓𝐊
𝐓𝐡𝐢𝐬 𝐜𝐡𝐚𝐧𝐧𝐞𝐥 𝐡𝐚𝐬 𝐬𝐨𝐦𝐞 𝐞𝐥𝐞𝐜𝐭𝐫𝐨𝐧𝐢𝐜 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬 𝐟𝐨𝐫 𝐛𝐞𝐠𝐢𝐧𝐧𝐞𝐫𝐬. 𝐒𝐨 𝐟𝐞𝐞𝐥 𝐟𝐫𝐞𝐞 𝐭𝐨 𝐜𝐡𝐞𝐜𝐤 𝐭𝐡𝐞𝐦:
Robo Soccer Bot using Brushed ESC and FlySky Transmitter / How to Make Soccer Bot in Easiest Way / Soccer Bot using ESC:
Fast Line Follower Robot / Fast LFR / Fastest LFR / PID Line Follower:
• Fast Line Follower Rob...
How To Test Battery Capacity Using HW-586 Battery Capacity Tester:
• How To Test Battery Ca...
Soccer Making Bot Competition:
• Soccer Bot Competition...
Hand Drawing PCB Layout Using Marker Pen and Etching:
• Hand Drawing PCB Layou...
DIY Self Balancing Robot using Arduino and MPU6050 Accelerometer:
• DIY Self Balancing Rob...
Line Follower Robot:
• Line Follower Robot us...
How to Make ESP32 RC Robotic Car:
• How to Make ESP32 RC R...
Human Following Robot Arduino:
• Human Following Robot ...
Line Sensor Array for LINE FOLLOWER ROBOT:
• 6 Channel Line Sensor ...
ESP32 Soccer Bot / Soccer bot using ESP32 / How to Make Soccer Bot using ESP32:
• How to Make Soccer Bot...
Make Professional PCB at Home:
• How to Make Profession...
PCB Layout Design in Proteus:
• How to Design PCB Layo...
How To Use Sim800l GSM Module with Arduino:
• How To Use Sim800l GSM...
Dual LED Flasher Circuit:
• Dual LED Flasher Circu...
Music Rhythm LED Light Circuit:
• Music Rhythm LED Light...
Simplest LED Blink Circuit:
• Simple LED Blink Circu...
FLIP FLOP LED Light Circuit:
• FLIP FLOP LED Flasher ...
Fire Detector Circuit using IR Photodiode:
• Fire Detector Circuit ...
IR Proximity Sensor / Obstacle Detector Circuit:
• IR Sensor and Obstacle...
Soccer Bot Competition 2023:
• Soccer Bot Competition...
High Capacity Battery 12v Pack Making:
• High Capacity DIY 12 V...
Gas Detector using Arduino and MQ-2:
• Gas Leakage Alarm usin...
𝐂𝐨𝐦𝐩𝐨𝐧𝐞𝐧𝐭𝐬: 0:49 - 1:50 in Video.
𝐂𝐢𝐫𝐜𝐮𝐢𝐭 𝐃𝐢𝐚𝐠𝐫𝐚𝐦: sub4unlock.io/...
#RoboSoccerBot #SoccerRobot #soccerbot #robosoccer #soccerrobot #FlySkyFSi6 #BTS7960MotorDriver #diysoccerbot #robotics #flyskytransmitter
Like, Follow & Subscribe !!!
Instagram▶ / _aslam._hossain_
Facebook Page▶ / aslamhossain3852
RUclips▶ / @aslamhossain1
If this video is helpful to you, Please Subscribe! (#Aslam_Hossain)
---------------------------------------------
👉For any inquiries: aslamhshakil20@gmail.com
---------------------------------------------
𝐒𝐮𝐠𝐠𝐞𝐬𝐭𝐢𝐨𝐧:
Use Servo of the following model for better performance ---> Mg90s (good), Mg995 (better), Mg996r (best)
𝐒𝐨𝐦𝐞 𝐨𝐭𝐡𝐞𝐫 𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬:
Fast Line Follower Robot / Fast LFR / Fastest LFR / PID Line Follower:
ruclips.net/video/ST8KdWPMzp4/видео.htmlsi=4OLW0cTDNwGmwwBY
Robo Soccer Bot using Brushed ESC and FlySky Transmitter | How to Make Soccer Bot in Easiest Way:
ruclips.net/video/nd-Pnnmnu04/видео.htmlsi=gGmbe2CjW1lpm47K
Robo Soccer Bot using FlySky FS-i6 Transmitter and BTS7960 Motor Driver:
ruclips.net/video/gxoFwbduTOc/видео.htmlsi=8B-Z586qo14An_A3
𝐂𝐢𝐫𝐜𝐮𝐢𝐭 𝐃𝐢𝐚𝐠𝐫𝐚𝐦: github.com/aslam-Hossain-YT/RC-Robo-Soccer-Bot
I need your help
Very good 😊
3:19 Brother how did you separate the small motors?
Nice one bro😍🔥looking forward to the advanced line follower vid drop!
Thank You
Great Implementation Brother. 🎉 Keep it up
Thank You For Support
Your video is so good and initiative. ❤
Thank You
Keep up the good work 👍🏻
Thank you
There's a current stalling problem! When am applying 100% throttle for more than suppose 20sec, the motors stop rotating. And then when i come from 100% to 99%, they start rotating again, what solution do you suggest?
Can u please give the code for controlling 4 dc geared motor with aurdino and l293d motor driver .
I would know how to use ??
Which model of gear motor?
good job
Thank You
which wire did you use for the output of the buck converter?
@@aryavirsingh4399 Normal Wire suitable for carrying 5 volt, 1A
Hi, your project work is very good, like this make a video with 24volt 250 w 2 motors
I will try
Did u use a 360 degree servo?
No. You can use
Can we use single moter driver
I've used two single motor driver
I have put an output volt of 5.01 in my XL4015 Buck Module. All setups were done. Then I connected the whole circuit to Lipo battery of 2200mah to check the movement. But nothing moved , also the VCC connected wire melted. Can u please say where is the problem? Is it the Output volt or wire?
Use thicker wire. 14-16 AWG
Thanks a lot, but now the problem is the two left wheels became auto. It Doesn't stop or move unless we disconnect the battery.
overall price ?
𝐂𝐨𝐬𝐭 𝐀𝐧𝐚𝐥𝐲𝐬𝐢𝐬:
1. Motor (1100 TK x 4) = (1100 * 4) / 109.73 ≈ $40.11
2. Wheels, L-Mount, Hex Coupler = 2000 TK / 109.73 ≈ $18.23
3. BTS7960 (500 TK x 2) = (500 * 2) / 109.73 ≈ $9.11
4. Servo Motor (150 TK x 2) = (150 * 2) / 109.73 ≈ $2.73
5. Buck Converter (100 TK x 1) = 100 / 109.73 ≈ $0.91
6. Fsi6 Tx Rx = 6000 TK / 109.73 ≈ $54.65
7. Chassis = 2000 TK / 109.73 ≈ $18.23
𝐓𝐨𝐭𝐚𝐥 𝐂𝐨𝐬𝐭 𝐢𝐧 𝐔𝐒𝐃/𝐓𝐊 ≈ $𝟏𝟒𝟒.𝟗𝟕 ≈ 𝟏𝟓𝟗𝟎𝟕 𝐓𝐊
If I use lipo battery, what will be the ampere and volt for this robot?
3s 3000/4000mAh
Bhai weight bere jacche . Ami 37gb motor er outer metal covering ta khule felle kono problem hobe ? And jodi hoy, ki hobe ?
Kono somossha hobe na. Onk ei eta khule fele.
After connecting the battery with buck converter LM2596 the blue light does not light up and also there is no voltage reading. What to do?
check the polarity.
Can i use XL4015 as buck converter replacing LM2596? And if i do that, what and where will be the connections?
yes, you can use it. connect the battery terminal with the buck converter's input. set the output at 5v by adjusting potentiometer. then the output will go to BTS motor driver and Receiver.
I have all the connection in correct, its still not working, what might be the issue?
Check the connection in BTS. make sure you've shorted the both enable pins with vcc.
did you put resistors to the micro escs?
@@aslamhossain1
Can i use 2200 mah 3s lipo battery
Yes
Which battery did you use?
Lithium-ion. Please Use LiPo Battery, which is suitable for soccer bot.
Can I make this using lm293d motor driver module
No. It will burn as the motors take higher current.
From which site you buy the motor, pls post the link
Local Shop in Bangladesh. Where are you from?
India...
What is the torque of 600 rpm motor...
6-8kg@@AijoBabyE
এই মোটর কোথা থেকে কিনেছেন ভাই?
radiogearbd.com/product/500rpm-gear-motor-37gb-12v-24v-with-high-quality-metal-gear-box/
❤
All connections are correct but wheels are not moving and remote also shows Err-4%. What can I do?
Maybe the circuit is damaged
The bot is not moving backwards, what might be the issue?
Maybe in Remote.
Check code using a serial monitor, the processs depends on the type of microcontroller you are using.
I have the I have same issue someone help please
I made all connections according to circuit diagram but, it's not working ,what might be the problem?
Make sure enable pins of driver short with vcc
3:19 Brother how did you separate the small motors?
Using soldering iron.